ZyXEL NBG5615 User Guide - Page 155
Firewall, 18.1 Overview, 18.1.1 What You Can Do, 18.1.2 What You Need To Know
View all ZyXEL NBG5615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
CHAPTER 18 Firewall 18.1 Overview Use these screens to enable and configure the firewall that protects your NBG5615 and your LAN from unwanted or malicious traffic. Enable the firewall to protect your LAN computers from attacks by hackers on the Internet and control access between the LAN and WAN. By default the firewall: • allows traffic that originates from your LAN computers to go to all of the networks. • blocks traffic that originates on the other networks from going to the LAN. The following figure illustrates the default firewall action. User A can initiate an IM (Instant Messaging) session from the LAN to the WAN (1). Return traffic for this session is also allowed (2). However other traffic initiated from the WAN is blocked (3 and 4). Figure 93 Default Firewall Action LAN 1 A 2 WAN 3 4 18.1.1 What You Can Do • Use the General screen to enable or disable the NBG5615's firewall (Section 18.2 on page 157). • Use the Servicesscreen enable service blocking, enter/delete/modify the services you want to block and the date/time you want to block them (Section 18.3 on page 157). 18.1.2 What You Need To Know The following terms and concepts may help as you read through this chapter. NBG5615 User's Guide 155