ZyXEL P-202H Plus Quick Start Guide - Page 3

Initial Configuration, Troubleshooting

Get ZyXEL P-202H Plus PDF manuals and user guides View all ZyXEL P-202H Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

P-202H Plus v2 Quick Start Guide 4 POWER: Use the power adaptor provided with your P-202H Plus v2 to connect an appropriate power source to this port. Make sure the power source is on. 5 Push in the POWER button. Look at the LEDs on the front panel. • The POWER LED blinks while your P-202H Plus v2 starts up and stays on once the system is ready. • The ISDN and ETHERNET LEDs stay on if the corresponding port is properly connected and blinks when there is traffic. If any of these LEDs are not on, check your connections, and inspect your cables for damage. If the LEDs are still off, contact your local vendor. 3 Initial Configuration 1 Open your web browser, and go to http://192.168.1.1. 2 The login screen displays. Enter the password ("1234" is the default) and click Login. Note: If the login screen does not display, check your browser's security settings (see Troubleshooting for details) or make sure your computer is set to receive an IP address dynamically (see Set Up Your Computer's IP Address). 3 Type a new password, re-type it to confirm, and click Apply. (The next time you log in, you should not see this screen. 4 You should now see the Site Map screen. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
P-202H Plus v2 Quick Start Guide
3
4
POWER
: Use the power adaptor provided with your P-202H Plus v2 to connect an appropriate power
source to this port. Make sure the power source is on.
5
Push in the
POWER
button. Look at the LEDs on the front panel.
• The
POWER
LED blinks while your P-202H Plus v2 starts up and stays on once the system is ready.
• The
ISDN
and
ETHERNET
LEDs stay on if the corresponding port is properly connected and blinks when there
is traffic.
If any of these LEDs are not on, check your connections, and inspect your cables for damage. If the LEDs are
still off, contact your local vendor.
3 Initial Configuration
1
Open your web browser, and go to
.
2
The login screen displays. Enter the password (“1234” is the default) and click
Login
.
Note:
If the login screen does not display, check your browser’s security settings (see
Troubleshooting
for details) or make sure your computer is set to receive an IP address
dynamically (see
Set Up Your Computer’s IP Address
).
3
Type a new password, re-type it to confirm, and click
Apply
. (The next time you log in, you should not see
this screen.
4
You should now see the
Site Map
screen.