ZyXEL P-202H Plus Quick Start Guide - Page 7

P-202H Plus v2 Quick Start Guide Specify the first of the contiguous addresses in the IP address pool in the Client IP Pool Starting Address field. Specify the size or count of the IP address pool in the Size of Client IP Pool field. Enter the IP address(es) of the DNS server(s) in the Primary DNS Server and/or Secondary DNS Server fields. Click Finish. 10 The P-202H Plus v2 automatically tests the connection to the computer(s) connected to the LAN ports. To test the WAN connection from the P-202H Plus v2 to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the Site Map screen. Troubleshooting 1 If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server 2003, make sure you allow pop-up windows, JavaScripts and Java permissions or set the Internet security level lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options > Security > Custom Level...). See the appendix in the User's Guide for more information. 2 If you cannot access the Internet when your computer is connected to the LAN port, follow these steps. A) Check the LEDs on the front panel. If they are different than what is described in section 2, make sure the connections are correct. (See section 2.) If the LEDs are still different, turn off the device, wait a few seconds, and turn it on again. B) Follow the steps in section 3 again. Make sure you enter the correct information. For example, make sure you type the user name and password correctly. The user name and password are case sensitive. C) If you are using a new Internet account, contact your ISP to make sure it is active. D) If you still have problems, see Troubleshooting in the User's Guide. Set Up Your Computer's IP Address This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address. This ensures that your computer can communicate with your P-202H Plus v2. Refer to your User's Guide for detailed IP address configuration for other Windows and Macintosh computer operating systems. 1 In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel. 2 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up Connections. 7