ZyXEL P-2602R-D1A User Guide - Page 147
Configuring Port Forwarding
View all ZyXEL P-2602R-D1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
P-2602H(W)(L)-DxA Series User's Guide 10.5 Configuring Port Forwarding Note: If you do not assign a Default Server IP address, the ZyXEL Device discards all packets received for ports that are not specified here or in the remote management setup. Click Network > NAT > Port Forwarding to open the following screen. See Appendix F on page 371 for port numbers commonly used for particular services. Figure 81 Port Forwarding The following table describes the fields in this screen. Table 49 Port Forwarding LABEL DESCRIPTION Default Server Setup Default Server In addition to the servers for specified services, NAT supports a default server. A default server receives packets from ports that are not specified in this screen. If you do not assign a Default Server IP address, the ZyXEL Device discards all packets received for ports that are not specified here or in the remote management setup. Port Forwarding Service Name Select a service from the drop-down list box. Server IP Address Enter the IP address of the server for the specified service. Add Click this button to add a rule to the table below. # This is the rule index number (read-only). Active Click this check box to enable the rule. Service Name This is a service's name. Start Port This is the first port number that identifies a service. End Port This is the last port number that identifies a service. Server IP Address This is the server's IP address. Chapter 10 Network Address Translation (NAT) Screens 147