ZyXEL P-2602R-D1A User Guide - Page 244
Configuring Global Setting, Telecommuter VPN/IPSec Examples
View all ZyXEL P-2602R-D1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
P-2602H(W)(L)-DxA Series User's Guide 17.17 Configuring Global Setting To change your ZyXEL Device's global settings, click VPN and then Global Setting. The screen appears as shown. Figure 129 VPN: Global Setting The following table describes the fields in this screen. Table 91 VPN: Global Setting LABEL DESCRIPTION Windows Networking NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that (NetBIOS over TCP/IP) enable a computer to find other computers. It may sometimes be necessary to allow NetBIOS packets to pass through VPN tunnels in order to allow local computers to find computers on the remote network and vice versa. Allow NetBIOS Traffic Through All IPSec Tunnels Select this check box to send NetBIOS packets through the VPN connection. Apply Click Apply to save your changes back to the ZyXEL Device. Cancel Click Cancel to begin configuring this screen afresh. 17.18 Telecommuter VPN/IPSec Examples The following examples show how multiple telecommuters can make VPN connections to a single ZyXEL Device at headquarters. The telecommuters use IPSec routers with dynamic WAN IP addresses. The ZyXEL Device at headquarters has a static public IP address. 17.18.1 Telecommuters Sharing One VPN Rule Example See the following figure and table for an example configuration that allows multiple telecommuters (A, B and C in the figure) to use one VPN rule to simultaneously access a ZyXEL Device at headquarters (HQ in the figure). The telecommuters do not have domain names mapped to the WAN IP addresses of their IPSec routers. The telecommuters must all use the same IPSec parameters but the local IP addresses (or ranges of addresses) should not overlap. 244 Chapter 17 VPN Screens