ZyXEL P-2612HNU-F1 User Guide - Page 129
The More AP Screen
View all ZyXEL P-2612HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chapter 6 Wireless Table 17 Wireless > General: More Secure: WPA(2) (continued) LABEL Group Key Update Timer Encryption DESCRIPTION The Group Key Update Timer is the rate at which the RADIUS server sends a new group key out to all clients. If the security mode is WPA, the encryption mode is set to TKIP to enable Temporal Key Integrity Protocol (TKIP) security on your wireless network. If the security mode is WPA2 and WPA Compatible is disabled, the encryption mode is set to AES to enable Advanced Encryption System (AES) security on your wireless network. AES provides superior security to TKIP. If the security mode is WPA2 and WPA Compatible is enabled, the encryption mode is set to TKIPAES MIX to allow the wireless clients to use either TKIP or AES. 6.3 The More AP Screen The ZyXEL Device can broadcast up to four wireless network names at the same time. This means that users can connect to the ZyXEL Device using different SSIDs. You can secure the connection on each SSID profile so that wireless clients connecting to the ZyXEL Device using different SSIDs cannot communicate with each other. This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the ZyXEL Device. Click Network Settings > Wireless > More AP. The following screen displays. Figure 28 Network Settings > Wireless > More AP The following table describes the labels in this screen. Table 18 Network Settings > Wireless > More AP LABEL DESCRIPTION # This is the index number of the entry. Active This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active. A gray bulb signifies that this SSID is not active. P-2612HNU(L)-FxF User's Guide 129