ZyXEL P-660HN-F1 User Guide - Page 197
IPv6 Static Route Edit
View all ZyXEL P-660HN-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Chapter 13 Static Route 13.2.3 IPv6 Static Route Edit Use this screen to configure the required information for an IPv6 static route. Select an IPv6 static route index number and click Edit. The screen shown next appears. Figure 95 Advanced > Static Route > IPv6 Static Route: Edit The following table describes the labels in this screen. Table 68 Advanced > Static Route > IPv6 Static Route: Edit LABEL DESCRIPTION Static Route Setup Destination IPv6 Address This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a prefix length of 128 in the prefix length field to force the network number to be identical to the host ID. IPv6 Prefix Length Enter the address prefix to specify how many most significant bits compose the network address. Gateway IPv6 Address Enter the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. PVC IPv6 Address Select the interface through which the traffic is routed. Back Click this to return to the previous screen without saving. Apply Click this to save your changes. Cancel Click this to restore your previously saved settings. ADSL Router Series User's Guide 197