ZyXEL P-792H User Guide - Page 162
Table 44
View all ZyXEL P-792H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Chapter 12 VPN Table 44 Security > VPN > Setup > Edit LABEL DESCRIPTION Remote Specify the IP addresses of the devices behind the remote IPSec router that can use the VPN tunnel. The remote IP addresses must correspond to the remote IPSec router's configured local IP addresses. Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have the same local or remote IP address, but not both. You can configure multiple SAs between the same local and remote IP addresses, as long as only one is active at any time. Remote Address Type Use the drop-down menu to choose Single, Range, or Subnet. Select Single with a single IP address. Select Range for a specific range of IP addresses. Select Subnet to specify IP addresses on a network by their subnet mask. IP Address Start When the Remote Address Type field is configured to Single, enter a (static) IP address on the network behind the remote IPSec router. When the Remote Address Type field is configured to Range, enter the beginning (static) IP address, in a range of computers on the network behind the remote IPSec router. When the Remote Address Type field is configured to Subnet, enter a (static) IP address on the network behind the remote IPSec router. End / Subnet Mask When the Remote Address Type field is configured to Single, this field is N/A. When the Remote Address Type field is configured to Range, enter the end (static) IP address, in a range of computers on the network behind the remote IPSec router. When the Remote Address Type field is configured to Subnet, enter a subnet mask on the network behind the remote IPSec router. Address Information Local ID Type Select IP to identify this P-792H v2 by its IP address. Select DNS to identify this P-792H v2 by a domain name. Select E-mail to identify this P-792H v2 by an e-mail address. Content When you select IP in the Local ID Type field, type the IP address of your computer in the local Content field. The P-792H v2 automatically uses the IP address in the My IP Address field (refer to the My IP Address field description) if you configure the local Content field to 0.0.0.0 or leave it blank. It is recommended that you type an IP address other than 0.0.0.0 in the local Content field or use the DNS or E-mail ID type in the following situations. When there is a NAT router between the two IPSec routers. When you want the remote IPSec router to be able to distinguish between VPN connection requests that come in from IPSec routers with dynamic WAN IP addresses. When you select DNS or E-mail in the Local ID Type field, type a domain name or e-mail address by which to identify this P-792H v2 in the local Content field. Use up to 31 ASCII characters including spaces, although trailing spaces are truncated. The domain name or email address is for identification purposes only and can be any string. 162 P-792H v2 User's Guide