ZyXEL UAG50 User Guide - Page 36
Default, Description, Disable RADIUS Disable, Enable RADIUS Authentication
View all ZyXEL UAG50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
UAG50 User's Guide Item RADIUS Authentication Default Disable Time to Finish / Enable Accumulation Primary RADIUS Server Server IP Empty Authentication Port 1812 Accounting Port 1813 Share Secret Key Empty Secondary RADIUS Server Server IP Empty Authentication Port 1812 Accounting Port 1813 Share Secret Key Empty Retry times when Primary fail Retry Frequency ~ Seconds Accounting Service Interim Update Time 1 3 Disable 5 Minutes Description Disable (RADIUS Disable) Subscriber can direct access the Internet without entering username and password. Enable (RADIUS Authentication) UAG50 provides "RADIUS Authentication" for service provider to build up an Internet service with RADIUS server. If RADIUS Authentication is enabled, all subscribers' authentication will send to RADIUS Server by RADIUS protocol (RFC 2865, 2866). Service provider provides two different accounting calculate for the Internet service. Enter the IP address of RADIUS server. Enter the authentication port number; the authentication port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535. Enter the accounting port number; the accounting port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535. The share secret key, the key number also has to match with the Server setting. Up to 64 characters are allowed. Enter the IP address of RADIUS server. Enter the authentication port number; the authentication port number must match with the secondary RADIUS server setting. The allowed numbers are from 0 to 65535. Enter the accounting port number; the accounting port number must match with the secondary RADIUS server setting. The allowed numbers are from 0 to 65535. The share secret key, the key number also has to match with the secondary RADIUS Server setting. Up to 64 characters are allowed. Specify the retry times when primary fail. The field default value is 3 seconds. Enables or disables the accounting service. Specify the interim update time. 36