ZyXEL VES1724-55C User Guide - Page 82
Port Setup
View all ZyXEL VES1724-55C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 8 Basic Setting The following table describes the labels in this screen. Table 16 Basic Setting > External Alarm Switch LABEL Index Status Enable Name Apply Cancel DESCRIPTION This is the index number of the external alarm input. This field displays whether the external alarm input has alarms (Alarm) or not (Normal). Disable displays if the external alarm input is not in use. Select this check box to have the Switch use the external alarm input. Enter a descriptive name that identifies this alarm input. You can enter up to 31 printable characters. Spaces are also allowed. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 8.9 Port Setup Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the navigation panel to display the configuration screen. Figure 41 Basic Setting > Port Setup The following table describes the labels in this screen. Table 17 Basic Setting > Port Setup LABEL Port * DESCRIPTION This is the port index number. Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Active Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to enable a port. The factory default for all ports is enabled. A port must be enabled for data transmission to occur. 82 VES1724-56 User's Guide