ZyXEL ZyWALL 2WG User Guide - Page 206
Subnet Address
View all ZyXEL ZyWALL 2WG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Chapter 11 Firewall Screens The following table describes the labels in this screen. Table 51 SECURITY > FIREWALL > Rule Summary > Edit LABEL DESCRIPTION Rule Name Enter a descriptive name of up to 31 printable ASCII characters (except Extended ASCII characters) for the firewall rule. Spaces are allowed. Edit Source/ Destination Address Address Type Do you want your rule to apply to packets with a particular (single) IP, a range of IP addresses (for example 192.168.1.10 to 192.169.1.50), a subnet or any IP address? Select an option from the drop-down list box that includes: Single Address, Range Address, Subnet Address and Any Address. Start IP Address Enter the single IP address or the starting IP address in a range here. End IP Address Enter the ending IP address in a range here. Subnet Mask Enter the subnet mask here, if applicable. Add Click Add to add a new address to the Source or Destination Address(es) box. You can add multiple addresses, ranges of addresses, and/or subnets. Modify To edit an existing source or destination address, select it from the box and click Modify. Delete Highlight an existing source or destination address from the Source or Destination Address(es) box above and click Delete to remove it. Edit Service Available/ Selected Services Highlight a service from the Available Services box on the left, then click >> to add it to the Selected Service(s) box on the right. To remove a service, highlight it in the Selected Service(s) box on the right, then click