ZyXEL ZyWALL USG 50 User Manual - Page 160
Label, Description - disable dhcp
View all ZyXEL ZyWALL USG 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Chapter 8 Dashboard Table 19 Dashboard (continued) LABEL DESCRIPTION Flash Usage This field displays what percentage of the ZyWALL's onboard flash memory is currently being used. Active Sessions This field displays how many traffic sessions are currently open on the ZyWALL. These are the sessions that are traversing the ZyWALL. Hover your cursor over this field to display icons. Click the Detail icon to go to the Session Monitor screen to see details about the active sessions. Click the Show Active Sessions icon to display a chart of ZyWALL's recent session usage. Interface Status Summary If an Ethernet interface does not have any physical ports associated with it, its entry is displayed in light gray text. Click the Detail icon to go to a (more detailed) summary screen of interface statistics. # This shows how many interfaces there are. Name This field displays the name of each interface. Status This field displays the current status of each interface. The possible values depend on what type of interface it is. For Ethernet interfaces: Inactive - The Ethernet interface is disabled. Down - The Ethernet interface does not have any physical ports associated with it or the Ethernet interface is enabled but not connected. Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the port speed and duplex setting (Full or Half). Zone IP Address For cellular (3G) interfaces, see Section 9.9 on page 183 for the status that can appear. This field displays the zone to which the interface is currently assigned. This field displays the current IP address assigned to the interface. If the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and subnet mask via DHCP. Action If this interface is a member of an active virtual router, this field displays the IP address it is currently using. This is either the static IP address of the interface (if it is the master) or the management IP address (if it is a backup). Use this field to get or to update the IP address for the interface. Click Renew to send a new DHCP request to a DHCP server. Click the Connect icon to have the ZyWALL try to connect a PPPoE/PPTP interface. If the interface cannot use one of these ways to get or to update its IP address, this field displays n/a. Extension Slot Slot Device Click the Disconnect icon to stop a PPPoE/PPTP connection. This section of the screen displays the status of the extension card slot and the USB ports. This field displays the name of each extension slot. This field displays the name of the device connected to the extension slot (or none if no device is detected). 160 ZyWALL USG 50 User's Guide