eMachines E4264 8512042 - eMachines Computer Reference Guide - Page 47
sure that Pin 1 on the processor indicated by
View all eMachines E4264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
www.emachines.com 4 Loosen the four captive screws (these screws cannot be removed) that secure the heat sink and fan assembly to the system board, then remove the assembly and place it on a stable surface with the flat surface of the heat sink (the side with the thermal grease) up. Screws (only one shown) 5 Push the processor release lever down, lift it completely up, then lift the processor retention bracket. 6 Remove the processor from the system board. 7 Install the new processor onto the system board. Make sure that Pin 1 on the processor (indicated by the silk-screened arrow on the corner of the processor) aligns with Pin 1 on the processor socket (indicated by the absence of a pin hole in the processor socket), then return the retention bracket and lever to their locked position. 41