2008 Acura TL Owner's Manual - Page 112

Main Menu Table Of Contents Driving Position Memory System Doing any of the following after pressing the MEMO button will cancel the storing procedure. Not pressing a memory button within 5 seconds. Readjusting the seat position. Readjusting the outside mirror position. Each memory button stores only one driving position. Storing a new position erases the previous setting stored in that button's memory. If you want to add a new position while retaining the current one, use the other memory button. Selecting a Memorized Position MEMORY BUTTONS The system will move the seat and outside mirrors to the memorized positions. The indicator in the selected memory button will flash during movement. When the adjustments are complete, you will hear two beeps, and the indicator will remain on. Notes for vehicles with M/T Instruments and Controls You cannot select a memorized position if the transmission is in reverse. Shift to another gear, then select a position. To select a memorized position, do this: 1. Make sure the parking brake is set (M/T) or the shift lever is in Park (A/T). 2. Press the desired memory button (1 or 2) until you hear a beep, then release the button. CONTINUED If the parking brake is not set, you must press and hold the memory button until the adjustment is complete. 109 2008 TL