2008 Acura TL Owner's Manual - Page 170

Main Menu Table Of Contents Audio System (Models with Navigation System) Loading Discs in the Changer To load multiple discs in one operation: 1. With the ignition switch in the ACCESSORY (I) or ON (II) position, press and hold the LOAD button until you hear a beep and see ''LOAD'' in the display, then release the button. 2. Insert a disc into the slot. Insert it only about halfway; the drive will pull it in the rest of the way. 3. When ''DISC LOAD'' appears in the display, insert the next disc into the slot. 4. Repeat this until all six positions are loaded. The system will then begin playing the last disc loaded. If you stop loading discs before all six positions are filled, the system will wait for 15 seconds, stop the load operation, and begin playing the last disc loaded. To load a single disc: 1. Press and release the LOAD button. 2. The disc number for an empty position is highlighted and the green load indicator comes on. When you see ''LOAD'' in the display, insert the disc into the slot. Insert it only about halfway; the drive will pull it in the rest of the way. If you press the LOAD button while a disc is playing, the system will stop playing that disc and start the loading sequence. It will then play the disc just loaded. Playing a Disc Select the disc changer by pressing the DISC/TAPE button. The system will begin playing the last selected disc in the disc changer. You will see the disc and track numbers displayed. Features To select a different disc when all six positions are loaded, press the corresponding number on the preset buttons. You can also select a disc by touching the appropriate disc icon (1 6). 167 2008 TL