2009 Acura RL Owner's Manual - Page 155
2009 Acura RL Manual
Page 155 highlights
Main Menu Table Of Contents Ignition Switch BUILT-IN KEY slightly. If the front wheels are turned, the anti-theft lock may make it difficult to turn the ignition switch. Firmly turn the steering wheel to the left or right as you turn the ignition switch. ACCESSORY (I) You can operate the audio system and the accessory power sockets in this position. When you turn the ignition switch to the ACCESSORY (I) position, an ''ACCESSORY (I) POSITION'' message is shown on the multiinformation display. ON (II) This is the normal ignition switch position when driving. Several of the indicators on the instrument panel come on as a test when you turn the ignition switch from the ACCESSORY (I) to the ON (II) position. START (III) Use this position only to start the engine. The switch returns to the ON (II) position when you let go of the ignition switch. If you open the driver's door and leave the key in the ignition switch, you will hear a reminder beeper, and a message appears on the multiinformation display according to the ignition switch position. When the ignition switch is in the ACC (I) position, a ''RETURN IGNITION SWITCH TO LOCK (0) POSITION'' message is shown on the multiinformation display. When the ignition switch is in the LOCK (0) position, a ''REMOVE KEY'' message is shown on the multiinformation display. The shift lever must be in Park before you turn the ignition switch knob to the LOCK (0) position or remove the built-in key from the ignition switch. IGNITION SWITCH COVER The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III). To use the built-in key, you have to remove the cover (see page 180 ). LOCK (0) You can insert or remove the built-in key only in this position. To turn the ignition switch to the LOCK (0) position, the shift lever must be in Park, and you must push the knob or built-in key in 152 2009 RL