2009 Acura RL Owner's Manual - Page 476
2009 Acura RL Manual
Page 476 highlights
Main Menu Table Of Contents Lights BOLTS 5. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector back onto the bulb. Make sure it is on all the way. 7. Turn on the fog lights to test the new bulb. CLIP CONNECTOR BULB 1. Use a Phillips-head screwdriver to remove the two undercover bolts, and remove the holding clip with a flat-tipped screwdriver. 2. Carefully push up the side under cover into the bumper. 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 4. Remove the bulb by turning it onequarter turn counterclockwise. 8. Reinstall the two undercover bolts on the side under cover and tighten them securely. Put the holding clip back on the side undercover and push on the center until it locks (the center is flush with the head). Maintenance 2009 RL 473