2010 Acura RL Owner's Manual

2010 Acura RL Manual

2010 Acura RL manual content summary:

  • 2010 Acura RL | Owner's Manual - Page 1
    of the 2010 Acura RL. We are certain you will be pleased with your purchase of one of the finest luxury vehicles in the world. One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and
  • 2010 Acura RL | Owner's Manual - Page 2
    front passenger seat occupancy, airbag deployment data, and the failure of any airbag system component. This data belongs to the vehicle owner and may not be accessed by anyone else except as legally required or with the permission of the vehicle owner. Service and solve service problems. It may
  • 2010 Acura RL | Owner's Manual - Page 3
    and other information on labels and in this manual. This information alerts you to potential hazards that Driver and Passenger Safety. Instructions how to use this vehicle correctly and safely. This entire book is filled with important safety information carefully. please read it iii 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 4
    , dashboard, and steering column) ...59 Features (climate control, audio, steering wheel, security, cruise control, HomeLink , and other convenience items)...203 Before Driving (fuel, vehicle break-in, and cargo loading) ...377 Driving (engine and transmission operation)...395 Maintenance (minders
  • 2010 Acura RL | Owner's Manual - Page 5
    2 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 6
    How to operate the climate control system, the audio system, and other convenience features. Before Driving What gasoline to use, how to breakin your new vehicle, and how to load luggage and other cargo. Driving The proper way to start the engine, shift the transmission, and park; plus what you
  • 2010 Acura RL | Owner's Manual - Page 7
    AUTO BUTTON (P.161) PASSENGER'S FRONT AIRBAG (P.11, 26) CLIMATE CONTROL SYSTEM (P.204) AUDIO SYSTEM (P.213) INTERFACE DIAL (P.205, 213, 282) COMPASS SYSTEM (P.281) AUTOMATIC TRANSMISSION (P.399) ACCESSORY POWER SOCKETS (P.197) TRUNK RELEASE BUTTON (P.154) FUEL FILL DOOR RELEASE BUTTON (P.379
  • 2010 Acura RL | Owner's Manual - Page 8
    LIGHTS (P.140, 142) COLLISION MITIGATION BRAKE SYSTEM (CMBS) OFF SWITCH 2 (P.416) VEHICLE STABILITY ASSIST (VSA) SYSTEM OFF SWITCH (P.430) ADAPTIVE FRONT LIGHTING SYSTEM (AFS) OFF SWITCH 2 (P.145) HEADLIGHT WASHER SWITCH 3 (P.138) MIRROR CONTROLS (P.161) STEERING WHEEL ADJUSTMENTS (P.148) BLUETOOTH
  • 2010 Acura RL | Owner's Manual - Page 9
    6 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 10
    ...57 Driver and Passenger Safety Important Safety Precautions ...8 Your Vehicle's Safety Features...9 Protecting Adults and Teens...13 1. Close and Lock the Doors ...13 2. Adjust the Front Seats ...20 Additional Information About Your Seat Belts ...21 Seat Belt System Components ...21 7 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 11
    seat, not the front seat. Infants and instructions and warnings in this manual. Don't Drink and Drive Alcohol and driving don't mix. Even one drink can reduce your ability to respond to changing change quickly, and only you can decide when it is safe to divert attention away from driving. 8 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 12
    Brake System (CMBS) (1) Safety Cage (2) Crush Zones (3) Seats and Seat-Backs (4) Head Restraints (5) Collapsible Steering Column (6) Seat Belts (7) Front Airbags (8) Side Airbags (9) Side Curtain Airbags (10) Door Locks (11) Front Seat Belt Tensioners/ Seat Belt e-pretensioners 9 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 13
    Your Vehicle's Safety Features Seat Belts Your vehicle is equipped with seat belts in all seating positions. Your seat belt system also includes an indicator on the instrument panel and a beeper to remind you and belts. Always wear your seat belt, and make sure you wear it properly. 10 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 14
    Features Airbags Driver and Passenger Safety Your vehicle has a supplemental restraint system (SRS) with front airbags to help protect the heads and chests of the driver and a front curtain airbags to help protect the heads of the driver, front passenger, and passengers in the outer rear seating
  • 2010 Acura RL | Owner's Manual - Page 15
    wheel as possible while allowing full control of the vehicle. A front passenger should move their seat as far back from the dashboard as possible. The rest of this section gives more detailed information about how you can maximize your safety. Remember, however, that no safety system . 12 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 16
    also hear a beep when you turn the ignition switch to the ON (II) position, and each time you open any door or the trunk with the key in the ON (II) position. When one or more doors are not tightly closed, the ''DOOR OPEN'' indicator will come on. Driver and Passenger Safety CONTINUED 13 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 17
    accidentally opening a door and falling out. Locking the doors also helps prevent an outsider from unexpectedly opening a door when you come to . When one or more doors and the trunk lid are not tightly closed, the corresponding indicator for each condition and the ''DOOR & TRUNK OPEN'' indicator
  • 2010 Acura RL | Owner's Manual - Page 18
    If you sit too close to the steering wheel or dashboard, you can be seriously injured by an inflating front airbag, or by striking the steering wheel or dashboard. The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between
  • 2010 Acura RL | Owner's Manual - Page 19
    position. Adjust the driver's head restraint so the center of the back of your head rests against the center of the restraint. Have passengers with adjustable head restraints adjust their restraints properly as well. Taller persons should adjust their restraint as high as possible. 16 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 20
    sure head restraints are in place and positioned properly before driving. Properly adjusted head restraints will help protect occupants from adjust the head restraints and how the driver's and front passenger's active head restraints work. Driver and Passenger Safety Position the lap part 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 21
    Make sure all seat belts are properly positioned before driving. If the seat belt touches or crosses your to adjust the seat belt anchor height. The front seats have adjustable seat belt anchors. To adjust result in serious injury or death. Have your dealer check the belt as soon as possible. See
  • 2010 Acura RL | Owner's Manual - Page 22
    front airbag. Advice for Pregnant Women Driver and floor. If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt, and keep the lap part of the belt as low as possible across the hips. CONTINUED 19 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 23
    consulting your dealer. Improperly replacing could be very seriously injured in a crash. hands or arms are close to an airbag cover, they could be injured if the airbag inflates. or covering front seat-back covers can prevent your side airbags from inflating during a side impact. 20 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 24
    belts are also equipped with automatic seat belt tensioners and, on models with collision mitigation brake system (CMBS), seat belt e-pretensioners. This system uses the same sensors as the front airbags to monitor whether the front seat belts are latched or unlatched, and how much weight is on the
  • 2010 Acura RL | Owner's Manual - Page 25
    driver's seat belt is latched and there is no front seat passenger and no items on the front seat, something may be interfering with the monitoring system. Look for and remove: Any items under the front buckle. Guide the belt door. All seat belts have an emergency locking retractor. In normal driving
  • 2010 Acura RL | Owner's Manual - Page 26
    positions except the driver's have a in any collision severe enough to cause the front airbags to deploy. If a side curtain airbag also be activated during a collision in which the front airbags do not deploy. In this case, the . Driver and Passenger Safety For added protection, the front seat
  • 2010 Acura RL | Owner's Manual - Page 27
    passenger's seat. On models with Collision Mitigation Brake System For added safety, the front seat belts are equipped with e-pretensioners that work in combination with the collision mitigation brake system (CMBS) (see page 413 ) and the brake pedal assist function (see page 410 ). 24 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 28
    possible. Acura provides a limited warranty on seat belts. See your Acura Warranty Information booklet for details. If a seat belt is worn during a crash, it must be replaced by the dealer. A belts regularly and have any problem corrected as soon as possible. Driver and Passenger Safety 25 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 29
    / Seat Belt e-pretensioners (5) Side Airbags (6) Driver's Seat Position Sensor (5) (7) Front Passenger's Seat Weight Sensors (8) Passenger Airbag Off Indicator (9) Side Impact Sensors (First) (10) Occupant Detection System (ODS) Sensors (9) (7) (9) (6) (4) (4) : On models with CMBS 26 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 30
    system includes: (14) (13) Two SRS (supplemental restraint system) front airbags. The driver's airbag is stored in the center of the steering wheel; the front side windows. The front and rear pillars are marked ''SIDE CURTAIN AIRBAG'' (see page 34 ). CONTINUED : On models with CMBS 27 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 31
    you to a possible problem with your airbags, sensors, seat belt tensioners (see page 34 ), or, on models with CMBS, seat belt e-pretensioners front airbag has been turned off (see page 35 ). Emergency backup power in case your vehicle's electrical system is disconnected in a crash. 28 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 32
    won't interfere with the driver's visibility, or the ability to steer or operate other controls. The total time for inflation and deflation is one-tenth of a second, so fast that most occupants are not aware that the airbags deployed until they see them lying in their laps. CONTINUED 29 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 33
    provides longer airbag inflation time with a little less force. Your front airbags are also dualthreshold airbags. Airbags with this feature have two deployment thresholds that depend on whether sensors detect the occupant needed to supplement the protection provided by the seat belt. 30 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 34
    child in front, if the sensors detect the weight of an infant or small child (up to about 65 lbs or 29 kg), the system will automatically turn the passenger's front airbag off. Be aware that objects placed on the passenger's seat can also cause the airbag to be turned off. CONTINUED 31 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 35
    This includes: A rear passenger pushing or pulling on the back of the front passenger's seat. If you ever have a moderate to severe side impact, sensors will detect rapid acceleration and signal the control unit to instantly inflate either the driver's or the passenger's side airbag. 32 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 36
    the moment the passenger moves into or out of the airbag deployment path and when the indicator comes on or goes off. A front seat passenger should not use a cushion or another object as a backrest. It may prevent the cutoff system from working properly. Driver and Passenger Safety 33 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 37
    on or flashes on and off while you drive. In a moderate to severe side impact, sensors will detect rapid acceleration and signal the control unit to instantly inflate the side curtain airbag and activate the seat belt tensioner on the driver's or the passenger's side of the vehicle. 34 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 38
    63 ). If it does not come on, stays on, or comes on while driving without a passenger in the front seat, you will also see a ''PASSENGER SIDE AIRBAG OFF'' message on the multi-information display. Have the system checked (see page 79 ). PASSENGER AIRBAG OFF INDICATOR This indicator alerts you that
  • 2010 Acura RL | Owner's Manual - Page 39
    indicator comes on with no front seat passenger and no objects dealer as soon as possible. Airbag Service Your airbag systems are virtually maintenance free, and there are no parts you can safely service. However, you must have your vehicle serviced dealer or a knowledgeable body shop. 36 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 40
    without consulting your dealer. This could make the driver's seat position sensor or the front passenger's weight sensors ineffective. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, first contact Acura Client Services at 800-382-2238. 37 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 41
    However, despite their best intentions, many adults do not know how to properly protect child passengers. If you have children, or ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants
  • 2010 Acura RL | Owner's Manual - Page 42
    back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly though your vehicle has an advanced front airbag system that automatically turns the passenger's front airbag off under certain circumstances 39 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 43
    remind you of the passenger's front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels. Canadian Models SUN VISORS 40 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 44
    child in the front passenger seat so they can watch the child, or because the to a child distracts the driver from the important tasks of driving, placing both of you at belt over yourself and a child. During a crash, the Driver and Passenger Safety belt could press deep into the child and
  • 2010 Acura RL | Owner's Manual - Page 45
    Lock all doors and the trunk when your vehicle is not in use. Children Use the childproof door locks to prevent children from opening the rear doors. This can decide if your children should be shown how to use this feature (see page 155 ). Keep vehicle keys/remote transmitters out of the reach
  • 2010 Acura RL | Owner's Manual - Page 46
    desired position. It could also interfere with proper operation of the passenger's advanced front airbag system. Child Seat Type An infant must be properly restrained in a rear-facing, Only a rear-facing child seat provides proper support for a baby's head, neck, and back. CONTINUED 43 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 47
    seat directly behind the front passenger's seat, move have a fivepoint harness system as shown. We also rear-facing child seat in the front seat can result in serious injury the back seat, not the front. Many states, Canadian provinces are driving and follow the child seat instructions. Many experts
  • 2010 Acura RL | Owner's Manual - Page 48
    front. Placing a forward-facing child seat in the front seat in the front, move the LATCH) system. Driver front airbags that automatically turn the passenger's front front seat can result in serious injury or death if the front airbag inflates. If you must place a forwardfacing child seat in front
  • 2010 Acura RL | Owner's Manual - Page 49
    lap/shoulder belt or with the LATCH (Lower Anchors and Tethers for CHildren) system. A child whose seat is not properly secured to the vehicle can be properly strapped in the child seat according to the child seat maker's instructions. A child who is not properly secured in a child seat 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 50
    button above the anchor point. You can find lower anchors in the slits in the seat-backs. BUTTON Driver and Passenger Safety LOWER ANCHORS REAR HEAD RESTRAINT TILT BUTTON To install a LATCH-compatible child seat: 1. on the ceiling console to pivot the head restraints down. CONTINUED 47 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 51
    lower anchors according to the child seat maker's instructions. Some LATCH-compatible seats have a rigid-type type you have, follow the child seat maker's instructions for adjusting or tightening the fit. 6. Route the to the seat maker's instructions. 8. Push and pull the child seat forward and from
  • 2010 Acura RL | Owner's Manual - Page 52
    driver's have a lockable retractor that must be activated to secure a child seat. 1. With the child seat in the desired seating position, route the belt through the child seat according to the seat maker's instructions need to repeat these steps. CONTINUED Driver and Passenger Safety 49 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 53
    belt. 5. Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps. 50
  • 2010 Acura RL | Owner's Manual - Page 54
    anchor, making sure the strap is not twisted. 3. Tighten the strap according to the seat maker's instructions. Driver and Passenger Safety COVER ANCHOR ANCHOR A child seat with a tether can be installed in any seating page 157 ) and route the tether strap over the head restraint. 51 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 55
    wear the lap/ shoulder belt. The following pages give instructions on how to check proper seat belt fit, what front. Checking Seat Belt Fit Allowing a child age 12 or under to sit in front can result in injury or death if the passenger's front airbag inflates. If a child must ride in front 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 56
    a Booster Seat to drive. Booster seats can be high-back or low-back. Whichever style you select, make sure the booster seat meets federal safety standards (see page 45 ) and that you follow the booster seat maker's instructions. If a child who uses a booster seat must ride in front, move the vehicle
  • 2010 Acura RL | Owner's Manual - Page 57
    Front The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat. If the passenger's front front, be sure to: Carefully read the owner's manual, and make sure you understand all seat belt instructions and
  • 2010 Acura RL | Owner's Manual - Page 58
    a seat belt across the neck. This could result Do not put any accessories on a seat belt. Devices intended to in serious neck injuries during a less effective and increase the chance of serious injury in a crash. Driver and Passenger Safety cause very serious injuries during a crash. It also
  • 2010 Acura RL | Owner's Manual - Page 59
    the door open, run the engine only long enough to move the vehicle out of the garage. With the trunk open, airflow can pull exhaust gas into your vehicle's interior and create a hazardous condition. If you must drive with the trunk open, open all the windows and set the climate control system as
  • 2010 Acura RL | Owner's Manual - Page 60
    labels carefully. If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement. DASHBOARD U.S. models only Driver and Passenger Safety RADIATOR CAP CONTINUED 57 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 61
    Safety Labels SUN VISORS U.S. models DOORJAMBS Canadian models U.S. models Canadian models 58 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 62
    Gauge ...70 Fuel Gauge ...70 Multi-Information Display ...71 Controls Near the Steering Wheel ...136 Windshield Wipers and Washers ...137 Turn Signals and Headlights ...140 Fog Lights ...142 Daytime Running Lights ...142 Automatic Lighting Off Feature ...143 Adaptive Front Lighting System (AFS
  • 2010 Acura RL | Owner's Manual - Page 63
    SYSTEM (P.204) AUDIO SYSTEM (P.213) INTERFACE DIAL (P.205, 213, 282) COMPASS SYSTEM (P.281) AUTOMATIC TRANSMISSION (P.399) ACCESSORY POWER SOCKETS (P.197) AUXILIARY INPUT JACK (P.277) 2 REAR SEAT HEATER SWITCHES 3 (P.184) USB ADAPTER CABLE (P.259) 2 : RL models 3 : Canadian models only 60 2010
  • 2010 Acura RL | Owner's Manual - Page 64
    INDICATOR (P.35, 63) ELECTRONICALLY CONTROLLED POWER STEERING SYSTEM (ECPS) INDICATOR (P.68) PARKING BRAKE AND BRAKE SYSTEM INDICATOR (P.63, 502) COLLISION MITIGATION BRAKE SYSTEM (CMBS) INDICATOR (P.69) LOW FUEL INDICATOR (P.66) ADAPTIVE FRONT LIGHTING SYSTEM (AFS) INDICATOR (P.69, 144) SEAT BELT
  • 2010 Acura RL | Owner's Manual - Page 65
    the multi-information display. For more information, see page 500 . Charging System Indicator If this indicator comes on when the engine is running, the battery is not being charged, and you will also see a ''CHECK CHARGING SYSTEM'' message on the multi-information display. For more information, see
  • 2010 Acura RL | Owner's Manual - Page 66
    parking brake while the engine is running, or if it comes on while driving, it can indicate a problem in the brake system. You will also see a ''BRAKE FLUID LOW'' or ''CHECK BRAKE SYSTEM'' message on the multi-information display. For more information, see page 508 . U.S. Canada Side Airbag Off
  • 2010 Acura RL | Owner's Manual - Page 67
    ACCESSORY (I) or the LOCK (0) position without turning off the light switch, this indicator will remain on. A reminder chime will also sound when you open the driver's door. Immobilizer System right turn signal indicator blinks when you signal a lane change or turn. If the indicator does not blink or
  • 2010 Acura RL | Owner's Manual - Page 68
    reduced brightness when the daytime running lights (DRL) are on (see page 142 ). Cruise Main Indicator On models without adaptive cruise control (ACC) This indicator comes on when you turn on the cruise control system by pressing the CRUISE button on the steering wheel (see page 316 ). 65 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 69
    needle does reach E. Super Handling-All Wheel Drive (SH-AWD) Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. If this indicator comes on at any other time, there is a problem in the SH-AWD system. You will also see a ''CHECK SH
  • 2010 Acura RL | Owner's Manual - Page 70
    or more tires are underinflated, call a professional towing service. For more information, see page 513 . 2. If this indicator begins to flash, there is a problem with the tire pressure monitoring system (TPMS). You will also see a ''CHECK TPMS SYSTEM'' message on the multi-information display. The
  • 2010 Acura RL | Owner's Manual - Page 71
    display. Press the INFO button on the steering wheel (see page 71 ) to see the message (see page 78 ). Most of the time, this indicator comes on along with other indicators in the instrument panel such as the seat belt reminder indicator, SRS indicator, VSA system indicator, etc. 68 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 72
    ; you will also see a ''CHECK ADAPTIVE FRONT LIGHTING SYSTEM'' message on the multi-information display (see page 78 ). If this happens, stop the vehicle in a safe place, turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position, and restart the engine. If the indicator does not go off
  • 2010 Acura RL | Owner's Manual - Page 73
    you turn off the ignition. TACHOMETER SPEEDOMETER TEMPERATURE GAUGE Avoid driving with an extremely low f uel level. Running out of f uel could cause the engine to misf ire, damaging the catalytic converter. U.S. model is shown. FUEL GAUGE Temperature Gauge This shows the temperature of the
  • 2010 Acura RL | Owner's Manual - Page 74
    -free driving. When you open the driver's door, a ''Welcome'' message is shown on the multi-information display. When you turn the ignition switch from the ON (II) position to the ACCESSORY (I) position, a ''Goodbye'' message is shown on the display. INFO ( / ) BUTTONS U.S. CANADA Instruments
  • 2010 Acura RL | Owner's Manual - Page 75
    (Canada) driven since you last reset it. There are two trip meters: Trip A and Trip B. Each trip meter works independently, so you can keep track of two different distances. To reset a trip meter, display it, then press and hold the SEL/RESET button until the number resets to ''0.0''. 72 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 76
    Multi-Information Display Outside Temperature OUTSIDE TEMPERATURE U.S. CANADA The temperature sensor is in the front bumper. The temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can cause an incorrect
  • 2010 Acura RL | Owner's Manual - Page 77
    Messages With the ignition switch in the ON (II) position, the upper part of the display changes, as shown in the illustration, each time you press the button. If you press the button, the display returns to the previous message. U.S. CANADA If ON Press the Press the button button 74 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 78
    distance you can travel on the fuel remaining in the fuel tank. This distance is estimated from the fuel economy you received over the last several miles(U.S.) or kilometers (Canada), so it will vary with changes in speed, traffic, etc. When the battery is disconnected, or you refuel, RANGE
  • 2010 Acura RL | Owner's Manual - Page 79
    Tire Pressure Monitor Bluetooth HandsFreeLink U.S. Canada This monitor shows how much torque is being delivered to each wheel. For more information, see page 407 . When the tire pressure monitor is shown on the multi-information display, press the SEL/RESET button. The display changes as shown
  • 2010 Acura RL | Owner's Manual - Page 80
    Messages Have your dealer do the indicated maintenance as soon as you see this message, and have them reset the display after completing the service. If you do not perform the indicated maintenance or do not reset the display, the message changes to ''SERVICE PAST DUE'' when the engine oil life
  • 2010 Acura RL | Owner's Manual - Page 81
    problem is detected with your vehicle, a message will be shown on the multi-information display. If this happens, refer to the applicable pages of this owner's manual, and follow the instructions. When there are several messages to be shown, the system 500 See page 398 See page 66, 407 78 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 82
    See page 427 See page 425 See page 67, 425 See page 179 See page 177 See page 178 Instruments and Controls See page 142 U.S. Canada See page 35, 63 See page 458 CONTINUED 79 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 83
    Multi-Information Display See page 441 See page 152 See page 152 80 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 84
    displayed, customizing is not possible. To have the driver's ID detected, make sure your remote is linked to the system (see Memory Position Link on page 104 ). Then use your remote to unlock the doors (see Keyless Access Setup on page 108 ). To change the settings, the ignition switch must be in
  • 2010 Acura RL | Owner's Manual - Page 85
    above or below its current reading. Causes trip meter A, the average fuel economy, and the average speed to reset when you refuel. Resets the elapsed time of your current trip. Changes the driver's seat, the steering wheel, and the outside mirror positions to your stored setting. Moves the steering
  • 2010 Acura RL | Owner's Manual - Page 86
    headlight switch needs to be in the AUTO position. Changes when the doors automatically lock. CUSTOMIZE SET UP DRIVER DOOR ONLY ALL DOORS ON OFF Page 109 KEYLESS ACCESS LIGHT FLASH 111 Instruments and Controls KEYLESS ACCESS BEEP ON OFF 60 SEC 30 SEC 15 SEC 60 SEC 30 SEC 0 SEC 15 SEC MAX MIN
  • 2010 Acura RL | Owner's Manual - Page 87
    of the remote's unlock button. The exterior lights flash each time you press the LOCK or UNLOCK button. Changes how long it takes (in seconds) for the doors to relock and the security system to set after you unlock the driver's door without opening it. Changes the wiper operation among two settings
  • 2010 Acura RL | Owner's Manual - Page 88
    the factory, select DEFAULT ALL, as described on this page. If you want to change any vehicle control settings, select CHG SETTING, then press the SEL/ RESET button. Use the INFO ( / ) button on the steering wheel back to CUSTOMIZE ENTRY. DEFAULT ALL Instruments and Controls CONTINUED 85 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 89
    see the above display for several seconds, then the screen goes back to the normal message mode. Repeat the procedure to select DEFAULT ALL. 86 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 90
    CRUISE CONTROL SETUP METER SETUP POSITION SETUP KEYLESS ACCESS SETUP LIGHTING SETUP DOOR/WINDOW SETUP WIPER SETUP While CHG SETTING in the CUSTOMIZE ENTRY is shown on the multi-information display, press the SEL/RESET button. The screen changes to ACC SETUP in the CUSTOMIZE GROUP. Each time you
  • 2010 Acura RL | Owner's Manual - Page 91
    -Information Display ADAPTIVE CRUISE CONTROL SETUP see page 89 METER SETUP see page 94 POSITION SETUP see page 103 KEYLESS ACCESS SETUP see page 108 LIGHTING SETUP see page 115 DOOR/WINDOW SETUP see page 122 WIPER SETUP see page 133 Press the or button. Press the SEL/RESET button. 88 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 92
    changes as shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection. Press the or button. Press the SEL/RESET button. see page 92 Instruments and Controls see page 90 CONTINUED 89 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 93
    Display Pre-Running Car Detect Beep When PRE-RUNNING CAR DETECT BEEP is set to ON, one beep sounds when the ACC detects a vehicle in front of you. press the SEL/RESET button. The screen changes to the above display. Press the SEL/RESET button. The screen changes as shown above. Select ON or OFF by
  • 2010 Acura RL | Owner's Manual - Page 94
    seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the prerunning car detect beep setup. To exit PRE-RUNNING CAR DETECT BEEP without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen
  • 2010 Acura RL | Owner's Manual - Page 95
    CUSTOMIZE GROUP, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the . Press the SEL/RESET button. The screen changes as shown above. The highlighted unit, mph or km/h, is the current setting. To change the setting, press the INFO ( / )
  • 2010 Acura RL | Owner's Manual - Page 96
    goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the ACC display speed unit setup. To exit ACC DISPLAY SPEED UNIT without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU. 93
  • 2010 Acura RL | Owner's Manual - Page 97
    is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. Each time you press the INFO ( / ) button, the screen changes as shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to
  • 2010 Acura RL | Owner's Manual - Page 98
    can make: English, French, and Spanish. To choose the language you want, follow these instructions: Instruments and Controls While METER SETUP is shown in the CUSTOMIZE GROUP of the multi-information / ) button, then enter your selection by pressing the SEL/RESET button. CONTINUED 95 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 99
    , then screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the language selection setup. To exit LANGUAGE SELECTION without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU
  • 2010 Acura RL | Owner's Manual - Page 100
    below the actual temperature, you can adjust it by following these instructions: Instruments and Controls While the multi-information display is in you see the above display. Press the SEL/RESET button. The screen changes as shown above. The highlighted number is the current setting above or
  • 2010 Acura RL | Owner's Manual - Page 101
    , then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the adjust outside air temperature display setup. To exit ADJUST OUTSIDE TEMP. DISPLAY without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen
  • 2010 Acura RL | Owner's Manual - Page 102
    trip A, average fuel economy A, and average speed to reset every time you refuel your vehicle, follow these instructions: Instruments and The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display. Press the SEL/RESET button. The screen changes as shown above
  • 2010 Acura RL | Owner's Manual - Page 103
    goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the trip A reset with refuel setup. To exit TRIP A RESET with REFUEL without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU. 100
  • 2010 Acura RL | Owner's Manual - Page 104
    information display, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display . Press the SEL/RESET button. The screen changes as shown above. Select the desired setting by pressing the INFO ( / )
  • 2010 Acura RL | Owner's Manual - Page 105
    the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the elapsed time reset setup. To exit ELAPSED TIME RESET without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU. 102
  • 2010 Acura RL | Owner's Manual - Page 106
    , select POSITION SETUP by pressing the INFO ( / ) button, and then press the SEL/RESET button. Each time you press the INFO ( / ) button, the screen changes as shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to
  • 2010 Acura RL | Owner's Manual - Page 107
    driver's seat, the steering wheel, and the outside mirror positions move to the positions stored in memory. To cause the memory to activate, open the driver's door with the remote, or grab the door The screen changes to the above display. Press the SEL/RESET button. The screen changes as shown
  • 2010 Acura RL | Owner's Manual - Page 108
    the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the memory position link setup. To exit MEMORY POSITION LINK without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU
  • 2010 Acura RL | Owner's Manual - Page 109
    When AUTO TILT & TELESCOPIC is set to ON, the steering wheel automatically moves fully in and up when you turn the ignition switch screen of the CUSTOMIZE GROUP, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.
  • 2010 Acura RL | Owner's Manual - Page 110
    goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the auto tilt and telescopic setup. To exit AUTO TILT & TELESCOPIC without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU. 107
  • 2010 Acura RL | Owner's Manual - Page 111
    DOOR UNLOCK MODE KEYLESS ACCESS LIGHT changes as shown in the illustration. Press the INFO ( / ) button until you see the custom setting then press the SEL/RESET button to enter your selection. Press the or button. Press the SEL/RESET button. see page 109 see page 111 see page 113 108 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 112
    driver's door or all doors unlock when you open the driver's door with the remote or by grabbing the door handle (while carrying the remote), follow these instructions changes to the above display. Press the SEL/RESET button. The screen changes as shown above. Select DRIVER DOOR ONLY or ALL DOORS
  • 2010 Acura RL | Owner's Manual - Page 113
    display for several seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the door unlock mode setup. To exit DOOR UNLOCK MODE without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes
  • 2010 Acura RL | Owner's Manual - Page 114
    lights blink twice when you unlock the doors by grabbing the driver's door handle while carrying the remote. The same exterior lights blink once when you lock the doors by touching the door above display. Press the SEL/RESET button. The screen changes as shown above. Select ON or OFF by pressing the
  • 2010 Acura RL | Owner's Manual - Page 115
    seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the keyless access light flash setup. To exit KEYLESS ACCESS LIGHT FLASH without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes
  • 2010 Acura RL | Owner's Manual - Page 116
    drivers door handle while carrying the remote. When you lock the doors by touching the door lock sensor while carrying the remote, the beeper sounds once. While the multi-information display is in the KEYLESS ACCESS SETUP screen of the CUSTOMIZE GROUP, press the SEL/RESET button. The screen changes
  • 2010 Acura RL | Owner's Manual - Page 117
    the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the keyless access beep setup. To exit KEYLESS ACCESS BEEP without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU. 114
  • 2010 Acura RL | Owner's Manual - Page 118
    on the multi-information display, select LIGHTING SETUP by pressing the INFO ( / ) button, then press the SEL/RESET button. Each time you press the INFO ( / ) button, the screen changes as shown in the illustration. Press Instruments and Controls see page 116 see page 120 CONTINUED 115 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 119
    Light Dimming Time The interior lights fade out when you close all doors and the trunk. To change how long the lights stay on before they fade out, follow these instructions: While LIGHTING screen changes as shown above. Select how long you want the lights to stay on before they fade out (60, 30
  • 2010 Acura RL | Owner's Manual - Page 120
    seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the interior light dimming time setup. To exit INTERIOR LIGHT DIMMING TIME without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen
  • 2010 Acura RL | Owner's Manual - Page 121
    lights, side marker lights, taillights, and license plate lights go off after the selected time when you close the driver's door and take the remote with you. To change how long the lights changes as shown above. Select how long you want the lights to stay on before they go off (0, 15, 30, or 60
  • 2010 Acura RL | Owner's Manual - Page 122
    back to CUSTOMIZE SETUP. If this happens, you need to repeat the headlight auto off timer setup. To exit HEADLIGHT AUTO OFF TIMER without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU. CONTINUED
  • 2010 Acura RL | Owner's Manual - Page 123
    the AUTO position and the ambient light reaches a changeable level. You can select the auto light sensitivity from the following five it is dark. While LIGHTING SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU.
  • 2010 Acura RL | Owner's Manual - Page 124
    seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the headlight auto light sensitivity setup. To exit AUTO LIGHT SENSITIVITY without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen
  • 2010 Acura RL | Owner's Manual - Page 125
    on the multi-information display, select DOOR/WINDOW SETUP by pressing the INFO ( / ) button, and then press the SEL/ RESET button. Each time you press the INFO ( / ) button, the screen changes as shown in the illustration. Press or button. Press the SEL/RESET button. see page 131 122 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 126
    , press the SEL/RESET button. You will see the above display. Press the SEL/RESET button. The screen changes as shown above. Select the desired setting by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection. Instruments and Controls CONTINUED 123 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 127
    display for several seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the auto door lock setup. To exit AUTO DOOR LOCK without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back
  • 2010 Acura RL | Owner's Manual - Page 128
    three settings you can choose from: SHIFT TO P The driver's door or all the doors, depending on the door lock mode setting (see page 127 ), unlock when you move the shift lever to Park. IGN OFF The driver's door or all the doors, depending on the door lock mode setting (see page 127 ), unlock when
  • 2010 Acura RL | Owner's Manual - Page 129
    for several seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the auto door unlock setup. To exit AUTO DOOR UNLOCK without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back
  • 2010 Acura RL | Owner's Manual - Page 130
    changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see above display. Press the SEL/RESET button. The screen changes as shown above. Select DRIVER DOOR or ALL DOORS by pressing the INFO ( / ) button, then press the SEL/ RESET button to enter your selection. CONTINUED 127 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 131
    display for several seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the door lock mode setup. To exit DOOR LOCK MODE without changing the current setting, select EXIT by pressing the INFO ( / ) button, and then press the SEL/RESET button. The screen goes
  • 2010 Acura RL | Owner's Manual - Page 132
    you press the UNLOCK button on the remote to unlock the doors, the exterior lights blink twice to verify that the doors are unlocked and the security system is turned off. To turn this feature on or off, follow these instructions. Instruments and Controls While the multi-information display is in
  • 2010 Acura RL | Owner's Manual - Page 133
    goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the keyless lock acknowledgment setup. To exit KEYLESS LOCK ACKNOWLEDGMENT without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU
  • 2010 Acura RL | Owner's Manual - Page 134
    door, the doors relock and the security system sets within 30 seconds. To change the relock time, follow these instructions. Instruments and Controls While the multi-information display is in the DOOR button. The screen changes as shown above. Select the relock time you want (90, 60, or 30 seconds)
  • 2010 Acura RL | Owner's Manual - Page 135
    screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the security relock timer setup. To exit SECURITY RELOCK TIMER without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU. 132
  • 2010 Acura RL | Owner's Manual - Page 136
    screen, select WIPER SETUP by pressing the INFO ( / ) button, then press the SEL/RESET button. Each time you press the INFO ( / ) button, the screen changes as shown in the illustration. Press the INFO ( / ) button until you see WIPER ACTION, then press the SEL/RESET button to enter your selection
  • 2010 Acura RL | Owner's Manual - Page 137
    -information display is in the WIPER SETUP screen of the CUSTOMIZE GROUP, press the SEL/RESET button. The screen changes to the above display. Press the SEL/RESET button. The screen changes as shown above. Select INTERMITTENT or WITH VEH SPD by pressing the INFO ( / ) button, then press the SEL
  • 2010 Acura RL | Owner's Manual - Page 138
    seconds, then the screen goes back to CUSTOMIZE SETUP. If this happens, you need to repeat the wiper action setup. To exit WIPER ACTION without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU. 135
  • 2010 Acura RL | Owner's Manual - Page 139
    SIGNAL/FOG LIGHTS (P.140, 142) COLLISION MITIGATION BRAKE SYSTEM (CMBS) OFF SWITCH 4 (P.416) VEHICLE STABILITY ASSIST (VSA) SYSTEM OFF SWITCH (P.430) ADAPTIVE FRONT LIGHTING SYSTEM (AFS) OFF SWITCH 4 (P.145) HEADLIGHT WASHER SWITCH 2 (P.138) MIRROR CONTROLS (P.161) STEERING WHEEL ADJUSTMENTS (P.148
  • 2010 Acura RL | Owner's Manual - Page 140
    run at low speed. The wipers run at high speed. OFF The wipers are not activated. ADJUSTMENT RING INT The length of the wipe interval is varied automatically according to vehicle speed. To change the shortest delay ( position), the wipers change to low speed operation when the vehicle speed
  • 2010 Acura RL | Owner's Manual - Page 141
    wiper control lever. The washers spray until you release the lever. The wipers run at low speed, then complete one more sweep after you release the lever. any time by pressing the headlight washer button located next to the steering wheel column. The headlights must be turned on to use this button.
  • 2010 Acura RL | Owner's Manual - Page 142
    them to automatically park in the winter position. To return to the summer position, push the same area of both arms the other direction. 139 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 143
    a reminder chime when you open the driver's door. When the light switch is in the '' '' or '' '' position, the lights on indicator comes on as a reminder. This indicator stays on if you leave the light switch on and turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position. High Beams
  • 2010 Acura RL | Owner's Manual - Page 144
    you open and close the driver's door. To turn them on again, either turn the ignition switch to the ON (II) position or turn the light switch to the position. Even with the automatic lighting feature turned on, we recommend that you turn on the lights manually when driving at night or in a dense
  • 2010 Acura RL | Owner's Manual - Page 145
    display, there is a problem with the daytime running light system. Take your vehicle to a dealer to have it checked. When the multi-information display shows a ''DRL OFF'' message, the daytime running lights are off. Follow the procedure in the left column to turn them on. 142 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 146
    Turn Signals and Headlights Automatic Lighting Off Feature This feature turns off the headlights, all other exterior lights, and the instrument panel lights within 15 seconds after you turn the ignition switch to the LOCK (0) position and close the driver's door. To change the ''HEADLIGHT AUTO OFF
  • 2010 Acura RL | Owner's Manual - Page 147
    (see page 78 ). The adaptive front lighting system (AFS) helps to improve visibility during nighttime driving. The AFS controls the aiming direction and lighting distribution of the low beams according to the amount of turn applied to the steering wheel during cornering or turning. Press the
  • 2010 Acura RL | Owner's Manual - Page 148
    Front Lighting System (AFS) AFS Off Switch Here are some operating characteristics of the AFS: The system requires an initialization period. It does not begin to operate until you have driven the vehicle a short distance. At a stop, the right headlight turns right when you turn the steering wheel
  • 2010 Acura RL | Owner's Manual - Page 149
    Brightness Hazard Warning Button Instrument Panel Brightness U.S. CANADA ADJUSTMENT BUTTON Push the button between the center vents to turn on the hazard warning lights (four-way flashers). This causes all four while you adjust it. It goes out 5 seconds after you finish adjusting. 146 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 150
    at night, the instrument panel illumination dims when you turn the light switch to or . To cancel the glare reduction function, set the rear window is clear and you have good visibility before starting to drive. The defogger and antenna wires on the inside of the rear window can You 147 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 151
    Make any steering wheel adjustment before you start driving. Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash. Adjust the steering wheel only when the vehicle is stopped. Move the steering wheel in, out, up
  • 2010 Acura RL | Owner's Manual - Page 152
    in key back in the ignition switch. Steering wheel movement is also controlled by the driving position memory system (see page 163 ). To change the ''AUTO TILT & TELESCOPIC'' setting, see page 106 . If your vehicle's battery is disconnected or goes dead, or the fuse for the power tilt and telescopic
  • 2010 Acura RL | Owner's Manual - Page 153
    only Acura-approved key blanks. These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if dry them immediately with a soft cloth. The keys do not contain batteries. Do not try to take them apart. The built-in key (see page
  • 2010 Acura RL | Owner's Manual - Page 154
    system or add other devices to it. Electrical problems could result that may make your vehicle inoperable. If you have lost your remote or built-in key and cannot start the engine, contact your dealer operation. Changes or modifications device complies with Industry Canada Standard RSS-210. 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 155
    KEY slightly. If the front wheels are turned, the anti-theft lock may make it difficult to turn the ignition switch. Firmly turn the steering wheel to the left or right as you turn the ignition switch. ACCESSORY (I) You can operate the audio system and the accessory power sockets in this position
  • 2010 Acura RL | Owner's Manual - Page 156
    -in key a second time within a few seconds. When you shift to P after driving, the driver's door unlocks. To change the ''AUTO DOOR UNLOCK'' setting, see page 125 . Instruments and Controls Lockout Prevention Each front door has a power door lock master switch. Either switch locks and unlocks all
  • 2010 Acura RL | Owner's Manual - Page 157
    the rear seat by pulling the trunk release handle. Reach the handle through the trunk passthrough. Keep the trunk lid closed at all times while driving to avoid damaging the lid, and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard on page 56 . 154 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 158
    driver's door a safety feature, your doors. Each rear door has a lock lever near the edge. With the lever in the LOCK position, the door cannot be opened from the inside regardless of the position of the lock tab. To open the door, push the lock tab in, and use the outside door handle. 155 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 159
    . Moves the front of the seat up or down. Raises or lowers the seat. The controls for the power adjustable front seats are on the outside edge of each seat bottom. You can adjust the seats with the ignition switch in any position. Make all seat adjustments before you start driving. 156 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 160
    improperly positioning head restraints. FRONT CUSHION Your vehicle is equipped Your vehicle has adjustable head restraints on the front seats. They are most effective when you front head restraints adjust for height. You need both hands to adjust a restraint. Do not attempt to adjust it while driving
  • 2010 Acura RL | Owner's Manual - Page 161
    the head restraints can result in severe injury during a crash. Always replace the head restraints before driving. When reinstalling a head restraint, put the legs back in place. Then adjust it to the appropriate the ceiling console with the ignition switch in the ON (II) position. 158 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 162
    system to work properly: Do not hang any items on the head restraints, or from the restraint legs. Do not place any object between an occupant and the seat-back. Install each restraint in its proper location. Only use genuine Acura replacement head restraints. Instruments and Controls The driver
  • 2010 Acura RL | Owner's Manual - Page 163
    unlocked only with the built-in key. To lock the cover, insert the key, and turn it clockwise. Never drive with this cover open and the trunk lid open. COVER See Carbon Monoxide Hazard on page 56 . The rear seat swing it up, and push firmly on the top. Make sure it latches properly. 160 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 164
    the mirrors before you start driving. INDICATOR SENSOR Adjusting the Power to reduce glare. To turn on this feature, press the button on the bottom of lights are gone. Press the button again to turn off this feature. SELECTOR SWITCH ADJUSTMENT SWITCH 1. Move the selector switch to L (driver
  • 2010 Acura RL | Owner's Manual - Page 165
    the driving position memory system (see page 163 ). Reverse Tilt Door Mirror Both outside door mirrors have a reverse tilt feature. When driver's mirror, place the selector switch in the left position. To tilt the passenger's mirror, place the switch in the right position. To turn the feature 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 166
    temperature). It also shuts off when you turn off the ignition switch. Driving Position Memory System Your vehicle has a memory feature for the steering wheel, driver's seat, and outside mirror positions. Two seat, steering wheel, and outside mirror positions can be stored in separate memories. You
  • 2010 Acura RL | Owner's Manual - Page 167
    stored in that button's memory. All stored driving positions will be lost if your vehicle's battery goes dead or is disconnected. To select a memorized position, do this: 1. Make sure the shift lever is in Park. 2. Press the desired memory button (1 or 2) until you hear a beep. 164 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 168
    steering wheel, or outside mirrors after they are in their memorized position. If you change the memorized position, the indicator in the memory button will go out. To keep this driving position for later use, you must store it in the driving position memory. Instruments and Controls 165 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 169
    door(s), unlock the trunk, and start the engine without using the built-in key. The system may not work if: The battery the remote battery is dead. When the vehicle battery is dead. Make sure the driver always carries . The built-in keys do not contain batteries. Always keep the remote and the built-
  • 2010 Acura RL | Owner's Manual - Page 170
    System Keys BUILT-IN KEYS KEYLESS ACCESS REMOTES Instruments and Controls OPERATING RANGE KEY NUMBER TAG The following keys come with your vehicle. Refer to page 180 for how to separate the keys. Built-in Key the doors the doors, glove box, trunk pass-through cover, and to start the engine (
  • 2010 Acura RL | Owner's Manual - Page 171
    unlock when you grab the handle of the front passenger's door. When you unlock the door(s), some exterior lights blink twice and the system beeps twice. To change the ''KEYLESS ACCESS LIGHT FLASH'' setting, see page 111 . To change the ''KEYLESS ACCESS BEEP'' setting, see page 113 . The handle of
  • 2010 Acura RL | Owner's Manual - Page 172
    battery is dead. CONTINUED Each front door has a LOCK/ UNLOCK feature. When you touch the door lock sensor of the front door by hand, all the doors and the trunk will lock. Before locking the doors, make sure the remote is not inside the vehicle. When you lock the doors, some exterior lights
  • 2010 Acura RL | Owner's Manual - Page 173
    the system beeps, and the trunk reopens. PULL HANDLE When you close the trunk with all doors locked, the trunk will lock. When you unlock all the doors with the remote, built-in key or power door lock master switch, the trunk will unlock. Use the pull handle when you close the trunk. 170 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 174
    System the trunk lid closed at all times while driving to avoid damaging the lid, and to prevent exhaust gas from getting into the interior. See Carbon when carrying the remote (the system beeps once). LOCK Press this button once to lock all doors. Some exterior lights will flash. When you push the
  • 2010 Acura RL | Owner's Manual - Page 175
    MODE'' setting, see page 127 . To change the ''INTERIOR LIGHT DIMMING TIME,'' see page 116 . If you unlock the doors with the remote, but do not open any doors within 30 seconds, the doors automatically relock and the security system sets. To change the ''SECURITY RELOCK TIMER'' setting, see page
  • 2010 Acura RL | Owner's Manual - Page 176
    Keyless Memory SettingsTM Here are the settings activated with the remote: Driving position memory (see page 163 ). Customized settings (see page 81 ). Audio system settings (see page 213 ). DRIVER'S ID in the remote will blink once. Then release the buttons. Doing this cancels the keyless memory
  • 2010 Acura RL | Owner's Manual - Page 177
    Changes or battery disposal. This device complies with Industry Canada Standard RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference that may cause undesired operation of the device. 174 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 178
    remote with you. Instruments and Controls The engine may not run, and some malfunctions may occur, if door pockets. In the trunk, etc. The engine may not start if the remote is subjected to strong radio waves. Also, the engine may not start if the remote is too close to the windows. 175 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 179
    Access System Ignition Switch the beep, the steering wheel is locked. To unlock the steering wheel, turn in the LOCK (0) position. If you open the driver's door with the ignition switch in the ACCESSORY (I) position, a beeper will sound. You will also the ACCESSORY (I) position after 176 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 180
    Keyless Access System Also, if you close the door when the ignition sounds after you close the driver's door outside the vehicle, check the position of the ignition switch and the location of the remote. If the engine is running and you remove the remote and close the door. CONTINUED 177 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 181
    you bring the remote back inside the vehicle, and close the door or apply the parking brake. If the engine is running and you remove the remote from the vehicle, it will continue to run. Once turned to the LOCK (0) position, the engine will not restart until a remote is brought back into the vehicle
  • 2010 Acura RL | Owner's Manual - Page 182
    CHECK KEYLESS ACCESS SYSTEM.'' In this case, use the built-in key to lock/unlock the doors and start the engine. Instruments and Controls The indicator comes on for several seconds when you turn the ignition switch to the ON (II) position. Have your vehicle checked by your dealer if: 179 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 183
    -in key and Remote BUILT-IN KEY The keyless access system uses an electric field to identify the remote. If you use medical equipment such as a cardiac pacemaker, ask your doctor if remote and the built-in key, never pull on the built-in key unless you are pressing the release button. 180 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 184
    runs continuously. It does not cycle with temperature changes. LOW Follow these precautions whenever you use the seat heaters: Use the HI setting only to heat the seats quickly, because it draws large amounts of current from the battery. Instruments and Controls HEATERS Driver's seat FRONT
  • 2010 Acura RL | Owner's Manual - Page 185
    about 5 minutes. In MID, the heater will change to LOW after about 60 minutes. In LOW, the heater runs continuously. HEATERS Driver's seat BUTTON INDICATORS If equipped Both front seats are equipped with seat heaters and an air ventilation system. The passenger seat only has heaters in the
  • 2010 Acura RL | Owner's Manual - Page 186
    the button. The indicator (blue) next to the button will come on. The air ventilation system has four settings: HI Three indicators on. MID Two indicators on. LO One indicator on. OFF All indicators off. When you press the button once, the system is set to HI. To change to the lower mode, press
  • 2010 Acura RL | Owner's Manual - Page 187
    changes. HEATERS For left outer seating position REAR SEAT HEATER SWITCHES Follow these precautions whenever you use the seat heaters: Use the HI setting only to heat the seats quickly, because it draws large amounts of current from the battery. If the engine of the switch. This will 184 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 188
    To close the window, pull the switch up and hold it. Release the switch to stop the window. DRIVER'S WINDOW SWITCH Closing a power window on someone's hands or fingers can cause serious injury. Instruments and injure themselves by operating the windows unintentionally. CONTINUED 185 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 189
    lightly to the first detent, and hold it. The window will stop when you release the switch. All window switches also have the AUTO feature. Auto Reverse If the window runs delay cancels as soon as you open either front door. You must then turn the ignition switch to the ON (II) position for
  • 2010 Acura RL | Owner's Manual - Page 190
    the Windows and Moonroof with the Built-in Key You can open and close the windows and moonroof with the built-in key in the driver's door lock. To open: 1. Insert the built-in key in the driver's door lock. CONTINUED 187 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 191
    Power Windows, Moonroof To close: 1. Insert the built-in key in the driver's door lock. 2. Turn the key counterclockwise, then release it. 3. Turn the key counterclockwise again, and hold it. moonroof opens all the way. To stop the moonroof from opening fully, push the switch briefly. 188 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 192
    moonroof switch forward. To open or close the moonroof partially, pull back or push forward on the moonroof switch lightly to the first detent, and hold it. The moonroof will stop when you release the switch. To close the moonroof before opening or closing it. Instruments and Controls 189 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 193
    Moonroof Auto Reverse If the moonroof runs into any obstacle while it is closing turn off the ignition switch. The key-off delay cancels as soon as you open either front door. You must then turn the ignition switch to the ON (II) position for the moonroof moonroof panel or its motor. 190 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 194
    Parking Brake Driving the vehicle with the parking brake applied can damage the rear brakes, axles, and tires. A beeper will sound if the . The parking brake indicator on the instrument panel should go out when the parking brake is fully released with the engine running (see page 63 ). 191 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 195
    Interior Convenience Items FRONT DOOR POCKET CONSOLE COMPARTMENT INTEGRATED SUNSHADE ACCESSORY POWER SOCKETS POWER REAR SUNSHADE UTILITY POCKET GLOVE BOX/OWNER'S MANUAL TRAY BEVERAGE HOLDER in REAR SEAT ARMREST BEVERAGE HOLDER AUXILIARY INPUT JACK/ USB ADAPTER CABLE 192 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 196
    with the built-in key. The glove box light comes on only when the parking lights are on. RELEASE BUTTON Instruments and Controls An driving. Your vehicle has an owner's manual tray inside the glove box. To open the tray, push the release button up. To close the tray, push it up. 193 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 197
    knob to use the separator. For a long container, press the button in the beverage holder to raise the bottom plate. Stand the separator up. 194 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 198
    seat armrest. Open the beverage holder by pulling up on the latch on the front. To open the console compartment, pull up on the lever and lift the armrest, and push it down until it latches. The console compartment light is on when the light switch is in the or position. You can put small items in
  • 2010 Acura RL | Owner's Manual - Page 199
    Do not use the sun visor extension feature over the rear view mirror. Make it down. You can also use a sun visor at the side window. Remove the support rod from the clip, and swing the sun visor toward the side window. You can The vanity mirror lights come on when you pull up the cover. 196 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 200
    type cigarette lighter element. The interior of each front door has an extendable pocket for maps and other small, lightweight items. For safety, be sure both front door pockets are closed while driving. When the light switch is in the or position, the front door pocket light is on. 197 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 201
    (II) position, push the power rear sunshade button on the ceiling console to raise the rear sunshade. Push the button again to lower it. 198 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 202
    side curtain airbags. To prevent the integrated sunshades from being unhooked due to winds, leave the rear windows closed while driving. Instruments and Controls HOOK HOLE Each rear door has an integrated sunshade. To use a sunshade, hold the tab on the top, insert the sunshade into the holder
  • 2010 Acura RL | Owner's Manual - Page 203
    The front and rear of the ceiling have ceiling lights. Push the ON button to turn on all the ceiling lights. Push the OFF button to turn them off. Push each ceiling light button to turn its light on and off. To change the ''INTERIOR LIGHT DIMMING TIME'' setting, see page 116 . 200 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 204
    It fades out in about 30 seconds after the door is closed. COURTESY LIGHTS Front COURTESY LIGHTS Instruments and Controls Rear The courtesy lights between the sun visors and on the rear ceiling light panel come on when you turn the parking lights on. To adjust its brightness, press either of the
  • 2010 Acura RL | Owner's Manual - Page 205
    202 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 206
    Compass System ...281 Voice Control Basics ...304 Setting the Clock ...313 Security System ...315 Cruise Control ...316 Adaptive Cruise Control (ACC) ...319 HomeLink Universal Transceiver...334 AcuraLink ...337 Bluetooth HandsFreeLink ...354 Rearview Camera and Monitor ...375 Features 203 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 207
    Climate Control System DRIVER'S SIDE TEMPERATURE CONTROL BAR TEMPERATURE DISPLAY PASSENGER'S SIDE TEMPERATURE CONTROL BAR FAN CONTROL WINDSHIELD BUTTONS DEFROSTER REAR WINDOW DEFOGGER/ MIRROR HEATER BUTTON A/C BUTTON INTERFACE DIAL U.S. models (Technology package model is shown) 204 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 208
    Features See the Navigation System manual for complete details. On models without navigation system SELECTOR Refer to Voice Control Basics for complete details (see page 304 ). The knob turns left and right. Use it to make selections or adjustments to a list or menu on the screen. 205 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 209
    driver's or passenger's side. The driver and passenger can each set the temperature to the desired setting. Using the Fan Control Buttons Air turns the air conditioning on and off. You will see A/C ON or A/C OFF in the display. When you turn the A/C off, the system cannot regulate . 206 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 210
    turns the rear window defogger on and off (see page 147 ). Pushing this button also turns the power mirror heaters on and off. Mode Control Features You can select the vents air flows from. Some air will flow from the dashboard corner and side vents in all modes. 207 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 211
    floor vents. Air flows from the floor vents. Airflow is divided between the floor vents and defroster vents at the base of the windshield. When is selected, you can increase or decrease the temperature of airflow from the dashboard vent for the driver's side and the passenger's side without changing
  • 2010 Acura RL | Owner's Manual - Page 212
    Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. and fresh air mode. 1. Select 2. on the air conditioning, and setting the fan to maximum speed in fresh air mode. CONTINUED Features 209 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 213
    driving conditions whenever the outside temperature is above 32°F (0°C). To Defog and Defrost To remove fog from the inside of the windows: 1. Set the fan to the desired speed, or high for faster defrosting. . The system 2. Select automatically switches to fresh air A/C off if it is on. 210 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 214
    preference. When you set the temperature to its lower or its upper limit, the system runs at full cooling or heating only. It does not regulate the interior temperature. When you change the fan speed, the fan is taken out of AUTO mode and starts to run at the selected speed. Features 211 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 215
    Climate Control Sensors Semi-automatic Operation You can manually select various functions of the climate control system when it is in fully automatic mode. All other features remain automatically controlled. Making any manual selection causes the word AUTO in the display to go out. To Turn
  • 2010 Acura RL | Owner's Manual - Page 216
    Control System The audio system can also be operated by voice control. On models with navigation system Features SELECTOR See the Navigation System manual for complete details. On models without navigation system Refer to Voice Control Basics for complete details (see page 304 ). 213 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 217
    Audio System Playing the AM/FM Radio UPPER DISPLAY U.S. models (Technology package model is shown) and Canadian models POWER/ VOLUME KNOB SEEK BAR SCAN BUTTON POWER/ VOLUME KNOB SEEK BAR SCAN BUTTON AUDIO DISPLAY BUTTON Hawaiian models FM BUTTON AM BUTTON TUNE BAR A.SEL BUTTON AM/FM BUTTON TUNE
  • 2010 Acura RL | Owner's Manual - Page 218
    up. Each time you push it up, the band will change to FM1 or FM2. On the FM bands, STEREO will BAND Features TUNE ICON The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Press the AUDIO button to view the audio control display. Turn the system on . CONTINUED 215 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 219
    Audio System SKIP (SEEK) The skip (seek) function searches up and down from the current frequency to find a station with a strong signal. To activate it, and hold it for more than 2 seconds. 4. Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM. 216 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 220
    select feature to find stations in the local area. Press the A.SEL button. You will see A.SEL on the upper display A.SEL on the screen, and the system goes into scan mode for several seconds. The system stores the frequencies of six AM and twelve FM stations in the preset buttons. 217 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 221
    Audio System Radio Data System (RDS) On the FM band, you can select a favorite station and display the program service name provided by the radio data system (RDS). Program Service (PS) Name Display The program service name display function shows the name of the station you are listening to. You
  • 2010 Acura RL | Owner's Manual - Page 222
    Audio System If the station you are listening to is not an RDS station, the audio screen and the upper display continue to show the frequency with the PS name display function on. When you turn off this function by pressing the DISP button, the upper display shows ''RDS INFO OFF.'' Radio Data System
  • 2010 Acura RL | Owner's Manual - Page 223
    Audio System RDS Program Search RDS CATEGORY RDS CATEGORY Turn the selector to select see the selected RDS category name blinking in the display while searching it. When the system finds a station, the selected RDS category name will be displayed again for about 5 seconds in the upper display.
  • 2010 Acura RL | Owner's Manual - Page 224
    Audio System selected. To activate RDS program search with the interface dial, push the AUDIO button to display the FM radio information on the screen. Push the release the SCAN button. You will see SCAN in the display. The system will scan for a station with a strong signal in the selected RDS
  • 2010 Acura RL | Owner's Manual - Page 225
    Audio System If you do nothing, the system will scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the SCAN button again. If the system does not find a station, ''NOTHING'' will be blinking for about 5 seconds, then the system AUDIO
  • 2010 Acura RL | Owner's Manual - Page 226
    Audio System Radio Text Display This function displays the radio text information of the selected RDS station. If the selected RDS station has the radio text information, you will see the text indicator on the screen. TEXT INDICATOR Features RADIO TEXT ICON To activate radio text display, use
  • 2010 Acura RL | Owner's Manual - Page 227
    Audio System AM/FM Radio Frequencies The radio can receive the complete AM and FM bands go off and the sound will fade completely as you get out of range of the station's signal. Driving very near the transmitter of a station that is broadcasting on a frequency close to the frequency of the station
  • 2010 Acura RL | Owner's Manual - Page 228
    Audio System As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Features Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your
  • 2010 Acura RL | Owner's Manual - Page 229
    Audio System Adjusting the Sound BASS, TREBLE, BALANCE, and FADER are each adjustable. You can also adjust the strength of the sound coming from the center and subwoofer speakers. In addition, you can set the AudioPilot and Centerpoint features (when playing a CD-DA) to on or off. To adjust them,
  • 2010 Acura RL | Owner's Manual - Page 230
    Audio System BASS/TREBLE To adjust bass and These modes adjust the strength of the sound coming from each speaker. Fader adjusts the front-to-back strength, while balance adjusts the side-to-side strength. To adjust fader pressing ENTER on the interface selector. Features CONTINUED 227 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 231
    Audio System AudioPilot Bose AudioPilot digital processing monitors sound within the cabin, and helps compensate for unwanted ambient noise with no perceived change in audio volume. To set this feature on or AudioPilot and Centerpoint are registered trade marks of the Bose corporation. 228 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 232
    System Playing the XM Radio SATELLITE RADIO BUTTON UPPER DISPLAY POWER/ VOLUME KNOB CATEGORY BUTTONS SCAN BUTTON TUNE BUTTONS DISPLAY/ MODE BUTTON Features AUDIO DISPLAY BUTTON U.S. models (Technology package model is shown) and Canadian models INTERFACE DIAL PRESET BUTTON CONTINUED 229 2010
  • 2010 Acura RL | Owner's Manual - Page 233
    dial. To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or ON (II) position. Push the power/volume knob to turn on the audio system, and press the button. The last channel you listened to will show in the display. Adjust the volume by turning the power/volume knob. 230 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 234
    Audio System MODE To switch between the category mode and channel mode, press and hold the DISP/MODE button until the mode changes. The CATEGORY or CHANNEL mode select another category. You can also change a category by pushing the interface selector left or right. CONTINUED Features 231 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 235
    Audio System To store a channel: button or scroll 1. Press the up by pushing the interface selector up. Either XM1 or XM2 will be shown on the display. 2. next six channels using steps 2 and 3. Once a channel is stored, press and release the proper preset button to tune to it. XM BAND 232 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 236
    Audio System Note Function If equipped This function stores the sound content played on the selected satellite radio station with the channel, category, name and title information. Features To activate this function, All'' or ''Delete Selected Item,'' then press ENTER. CONTINUED 233 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 237
    Audio System The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To areas. SATELLITE Because XM is unavailable in Alaska, the XM hardware equipped with your vehicle cannot be operated. GROUND REPEATER 234 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 238
    in the ACCESSORY (I) or the ON (II) position, push the power/ volume knob to turn on the audio system, and press the button. A variety of music types and styles will play. If you decide to purchase XM radio service, contact XM Radio at www.xmradio.com, or at 1-800-852-9696. In Canada, contact XM
  • 2010 Acura RL | Owner's Manual - Page 239
    models LOAD BUTTON DISC/AUX BUTTON SKIP BAR SCAN BUTTON AUDIO DISPLAY BUTTON INTERFACE DIAL EJECT BUTTON LOAD BUTTON DISC/AUX BUTTON SKIP BAR SCAN BUTTON AUDIO DISPLAY BUTTON Hawaiian models EJECT BUTTON TUNE BAR POWER/ VOLUME KNOB TUNE BAR POWER/ VOLUME KNOB INTERFACE DIAL 236 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 240
    243 ). DVD-A discs not meeting DVD verification standards may not be playable. The changer cannot play DVD-V or DVD-R/RW formats. Some CD-DA and CD-ROM mixed discs are not playable. ''DTS'' and ''DTS Digital Surround'' are registered trademarks of Digital Theater Systems, Inc. Features 237 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 241
    Audio System Manufactured under license under U.S. Patent 's: 5,451,942; 5,956,674; 5,974,380; and ''LOAD'' appears in the upper display at the same time. Insert it only halfway; the drive will pull it in the rest of the way. You will see ''BUSY'' on the upper disc to jam in the unit. 238 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 242
    Audio System 2. Insert a disc into the disc slot when the disc load indicator turns green, and ''LOAD'' appears on the upper display at the same time. Insert the disc only about halfway; the drive will pull it in the rest of the way. You will see the disc number blinking on the upper display
  • 2010 Acura RL | Owner's Manual - Page 243
    Audio System To Play a Disc Select the changer by pressing the DISC/AUX button. The system will begin playing the disc and track playing and the elapsed time are shown on the audio control display. To Change Tracks Each time you press and release the side of the skip bar selector. 240 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 244
    Audio System To exit the track list display, press the AUDIO to the left again within 10 seconds. If you don't, the system advances to the next track, plays about 10 seconds of it, the right again within 10 seconds. If you don't, the system advances to the next disc, plays about 10 seconds of it,
  • 2010 Acura RL | Owner's Manual - Page 245
    Audio System Track Repeat To replay the current track continuously, use the interface selector to scroll down, select TRACK REPEAT, and press ENTER on the interface selector. As a reminder, you will see REPEAT next to TRACK on the screen. To turn this feature To turn this feature off, highlight DISC
  • 2010 Acura RL | Owner's Manual - Page 246
    stay in the drive. When you turn the system back on, the disc will begin playing where it left off. To take the system out of disc : AM or FM button on Hawaiian models. Playing a DVD-A Disc You can play a DVD-A disc in the disc changer. The disc controls are same Features CONTINUED 243 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 247
    Audio System button while playing a CD (CD-DA), the upper display changes from album name, to track name, to artist name, and playing a CD compressed in MP3/WMA format, the display changes from folder name, to file name, to track tag, system begins to play. Each time a new track, file, or folder plays
  • 2010 Acura RL | Owner's Manual - Page 248
    Audio System Folder Repeat (MP3/WMA Mode) Folder Random (MP3/WMA Mode) CURRENT FOLDER Features highlighted. FOLDER REPEAT ICON This feature, when activated, replays all feature off, highlight FOLDER REPEAT (if again. This feature, when feature off, highlight FOLDER RANDOM (if not
  • 2010 Acura RL | Owner's Manual - Page 249
    , press the eject button. When you press the eject button while listening to the radio, or with the audio system turned off, the disc that was last selected is ejected. After that disc is ejected, pressing the eject eject button. To eject all discs, press and hold the eject button. 246 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 250
    Audio System Playing an iPod DISC/AUX BUTTON UPPER DISPLAY POWER/ VOLUME KNOB SKIP BAR DISP BUTTON Features AUDIO DISPLAY BUTTON INTERFACE DIAL U.S. Technology package model and Canadian models are shown 247 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 251
    ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions. The system will only play songs stored on the iPod with iTunes. iPod and iTunes are registered trademarks owned by Apple Inc. Voice Control System iPods compatible with your audio system
  • 2010 Acura RL | Owner's Manual - Page 252
    Audio System NOTE: Do not connect your iPod using a your dock connector. USB CONNECTOR Connecting an iPod USB ADAPTER CABLE USB ADAPTER CABLE Features DOCK CONNECTOR We recommend backing up your data before playing it. 1. Unclip the to the USB adapter cable securely. CONTINUED 249 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 253
    for the Acura logo to display on the iPod. If the display does not change, this function is not supported on your iPod model or firmware. If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times. If the audio system still does
  • 2010 Acura RL | Owner's Manual - Page 254
    Audio System To Change or Select Files To Select a File from iPod Menu Use the SKIP bar while an iPod is playing to select passages and change files. SKIP Each time you press and release the side of the SKIP bar, the system dial. Press the AUDIO button to display the audio control display on the
  • 2010 Acura RL | Owner's Manual - Page 255
    Audio System If you select ''ALL,'' all available files on the selected list are played. Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio control display on the screen. To
  • 2010 Acura RL | Owner's Manual - Page 256
    TRACK RANDOM on the screen. To turn it off, have this mode highlighted and press ENTER again. Features REPEAT This feature continuously plays a file. To turn it off, press ENTER again. Pressing either side of the SKIP bar changes the file while keeping the repeat feature. CONTINUED 253 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 257
    functions may not be available on the vehicle's audio system. ALBUM RANDOM This feature plays all available albums from the selected items in disc is loaded). Press the DISC/ AUX button to switch the audio mode between the Bluetooth audio and iPod. Hawaiian models To play the radio, press the AM
  • 2010 Acura RL | Owner's Manual - Page 258
    the audio screen (if selected) show NO DATA. If you reconnect the same iPod, the system may begin playing where it left off, depending on what mode the iPod is in when it is reconnected. iPod Error Messages If you see an error message in the upper display, see page 272 . Features 255 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 259
    Audio System Playing a USB Flash Memory Device DISC/AUX BUTTON UPPER DISPLAY POWER/ VOLUME KNOB SKIP BAR DISPLAY BUTTON AUDIO DISPLAY BUTTON INTERFACE DIAL U.S. Technology package model and Canadian models are shown 256 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 260
    in the ACCESSORY (I) or ON (II) position. The audio system reads and plays the audio files on audio unit. The recommended USB flash memory devices are 256 MB or higher. Some digital audio features, etc.) will not work in this audio unit. NOTE: Do not use a device such as a card reader or hard drive
  • 2010 Acura RL | Owner's Manual - Page 261
    48 320 kbps Supported standards: MPEG4/AAC audio unit displays UNSUPPORTED, then skips to the next file. In WMA or AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the audio unit displays UNPLAYABLE FILE, and then skips to the next file. 258 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 262
    Audio System Connecting a USB Flash Memory Device USB ADAPTER CABLE names, and the elapsed time in the navigation screen. To Change or Select Files Use the SKIP bar while a USB flash memory device is playing to select passages and change files. Features the / or / button. CONTINUED 259 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 263
    Audio System You can also change files with the interface dial. Press the AUDIO button to show the audio control display on the navigation screen. Push the from the list by using the interface dial. Press the AUDIO button to show the audio control display on the navigation screen. 260 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 264
    Audio System To Select Repeat, Random or Scan Mode: Features Push up the selector on the interface dial to switch the display to the folder list, then turn the knob on the interface dial to select a folder. Press ENTER to change the display to the file list, then turn the knob on the interface
  • 2010 Acura RL | Owner's Manual - Page 265
    Audio System To cancel the selected mode, push down the selector to display the audio menu on the audio control display. Turn the knob on the interface dial to select the highlighted play mode, then press ENTER to turn off that selected mode. FOLDER REPEAT This feature replays all the files in the
  • 2010 Acura RL | Owner's Manual - Page 266
    Audio System TRACK SCAN This function samples all files in the selected folder in the order they are stored. To activate the scan feature system plays the last file sampled. You can also select the scan feature feature, system plays the last file sampled. You can also select the folder scan feature
  • 2010 Acura RL | Owner's Manual - Page 267
    / AUX button to switch the audio mode between the USB mode and Bluetooth audio. Hawaiian models You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Make sure to follow the USB flash memory device's instructions when you remove it. When
  • 2010 Acura RL | Owner's Manual - Page 268
    Audio System Playing Bluetooth Audio DISC/AUX BUTTON UPPER DISPLAY POWER/VOLUME KNOB SKIP BAR DISP BUTTON Features AUDIO BUTTON AUDIO CONTROL DISPLAY INTERFACE DIAL CONTINUED 265 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 269
    .com/handsfreelink, or by calling the HandsFreeLink consumer support at 1-888-528-7876. In Canada, visit www.acura.ca, or call 1-866-78-ACURA. NOTE: In some states it may be illegal to perform some data device functions while driving. To Play Bluetooth Audio Files Once a device is linked, the name
  • 2010 Acura RL | Owner's Manual - Page 270
    your Bluetooth Audio compatible phone does not operate as described, make sure it is an Acura approved phone. To find out if your phone is approved, go to www.acura.com/ handsfreelink (in Canada, visit www. acura.ca.), or call the HandsFreeLink client support at (888) 528-7876. Voice Control System
  • 2010 Acura RL | Owner's Manual - Page 271
    Audio System To change sound settings To pause or resume a file Turn the knob on the interface dial to switch the setting between the resume/pause mode and the sound mode. Select RESUME/PAUSE, then press ENTER to set your selection. Each time you press ENTER, the system temporarily. 268 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 272
    to select another audio mode. If an iPod or USB flash memory device is connected to the USB adapter cable or audio unit is connected to AUX jack, pressing the DISC/AUX button also changes a mode. Switching to another mode pauses the music playing from your phone. Features CONTINUED 269 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 273
    Audio System As required received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party authority to operate the equipment. This device complies with Industry Canada Standard RSS-210. Operation is subject to the following two
  • 2010 Acura RL | Owner's Manual - Page 274
    information on damaged discs, see page 275 . The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button be removed, consult your dealer. Do not try to force the disc out of the player. Eject Error Features 271 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 275
    DEVICE PLEASE CHECK MANUAL Cause USB ROM error Solution There is a problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected. Disconnect the device. Then, turn the audio system off, and
  • 2010 Acura RL | Owner's Manual - Page 276
    DEVICE PLEASE CHECK MANUAL Cause USB ROM error Solution There is a problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected. Disconnect the device. Then, turn the audio system off, and
  • 2010 Acura RL | Owner's Manual - Page 277
    audio use. When recording a CD-R or CD-RW, the recording must be closed for it to be used by the disc changer. Play only standard, round, 5-inch (12 cm) discs. Smaller or oddshaped discs may jam in the drive or cause other problems to not play properly, or possibly jam in the drive. 274 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 278
    of these discs are shown to the right: 1. Bubbled, wrinkled, labeled, and excessively thick discs Features Bubbled/ Wrinkled With Label/ Sticker Using Printer Label Kit Sealed With Plastic Ring 2. Damaged discs 3. Poor quality discs Chipped/ Cracked Warped Burrs CONTINUED 275 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 279
    discs 5. Discs with scratches, dirty discs Recommended discs are printed with the following logo. 3-inch (8-cm) CD Triangle Shape Fingerprints, scratches, etc. Audio unit may not play the following formats. CD-R or CD-RW may not play due to the recording conditions. Scratches and fingerprints on
  • 2010 Acura RL | Owner's Manual - Page 280
    input jack is inside the console compartment. The system will accept auxiliary input from standard audio accessories. When you plug in a mini-jack cable between a compatible audio unit and the jack, you will see AUX in the display and the system automatically switches to AUX mode. 277 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 281
    system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel. The VOL button adjusts the volume up ( ) or down ( ). Press the top or bottom of the button, hold it until the desired volume is reached, then release it. 278 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 282
    ( ) of the button, the system goes to the next preset channel. Press the bottom ( ) to go back to the previous preset channel. To select a different channel of the category you are listening to, press and hold the top ( ) or bottom ( ) of the CH button until you hear a beep. Features 279 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 283
    the audio system's serial number in this owner's manual. If you lose the card, you must obtain the code number from your dealer. To do this, you will need the audio system's serial number. If your vehicle's battery is disconnected or goes dead, or the radio fuse is removed, the audio system will
  • 2010 Acura RL | Owner's Manual - Page 284
    mileage and fuel economy. Features UPPER DISPLAY SCREEN System Controls The controls for the compass system are on the center console panel. These controls are also used to operate the climate control system (see page 204 ) and the audio system , and voice command Help. CONTINUED 281 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 285
    selector. Screen Press the button to display the set up screen (see page 293 ) to change and update information in the system. (Display Mode) Button This button switches the display between day mode, night mode, and band, frequency, volume, the climate control status, and the time. 282 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 286
    interface selector. NOTE: The OK button does not appear immediately. It appears after the system is loaded. The OK command cannot be activated by voice. CONTINUED The first screen to appear is the compass system globe screen. The screen then changes to the disclaimer screen: Features 283 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 287
    Compass System (U.S. model without navigation system) If you do not push in on the interface selector, the will be displayed the next time you start the vehicle. NOTE: The system will display the current message and any older or previously unread messages, with the newest message listed first.
  • 2010 Acura RL | Owner's Manual - Page 288
    to personalize the compass system. For example, if Driver 1 unlocks the vehicle, the ''Driver 1'' personal address book and other navigation settings are automatically loaded when the vehicle is started. There is no way to change from one driver's settings to another while driving. When the keyless
  • 2010 Acura RL | Owner's Manual - Page 289
    press the COMPASS button or say ''Display map guide.'' The date and time is also displayed. NOTE: If the battery is disconnected or the fuse for the compass system is removed, the system may require GPS initialization (see page 299 ). If the system does not receive the elevation information, the
  • 2010 Acura RL | Owner's Manual - Page 290
    navigation system) Main Menu Voice Command Help Features When you say ''Display menu'' or press the MENU button, the display changes to driver's ID of the remote (see page 173 ). The voice command help screen displays several topics that help you to understand your vehicle's voice control system
  • 2010 Acura RL | Owner's Manual - Page 291
    can be used with the voice control. To have the system read the list, say ''Read list,'' or select by moving the interface selector to the right, and the system will read the list to you. The trip computer screens the main menu, or press the TRIP button on the center console panel. 288 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 292
    remaining in the tank. This distance is estimated from the average fuel economy over the last several miles, so it will vary with changes in speed, traffic, etc. Features Resetting the Display Shows you the average fuel economy in miles per gallon since the display was last reset. Elapsed Time
  • 2010 Acura RL | Owner's Manual - Page 293
    right or left, the system displays the next or previous month. Entering Your Schedule allows the system to remind you of the calendar item the next time you start the vehicle. See System Start- the display changes to the Edit schedule screen. Message Say or select ''Edit message,'' and the system will show
  • 2010 Acura RL | Owner's Manual - Page 294
    will not be displayed when you start the vehicle. For more information, refer to System Start-up on page 283 . Edit Date Features From the calendar screen, select the date of the schedule you wish to remove. To edit schedule screen is redisplayed with the new date. CONTINUED 291 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 295
    Use the interface selector to control the calculator, and calculator ''conversion'' feature. To convert a unit of measurement, do this: 1. Enter a numeric value to be converted (for example, 100). 2. Push the interface selector down to select Unit conversion. The screen above appears. 292 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 296
    . The first setup screen allows you to change the system's brightness, contrast, black level, volume, interface dial feedback, and clock adjustment. To select a setup item, turn the interface knob until it is highlighted, then push the interface selector in to select it. CONTINUED 293 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 297
    you are having trouble viewing the screen in bright lighting conditions, try increasing the brightness. Contrast There are 11 possible black level settings. To change the black level, say ''Black level up'' or ''Black level down.'' You can also select Black Level and change the setting by turning
  • 2010 Acura RL | Owner's Manual - Page 298
    adjust the clock of your system. When the battery is disconnected or the fuse for the compass system is removed, you need to reset the time. See page 313 for more information on setting the clock. Features The second setup screen allows you to change the system's voice recognition feedback, auto
  • 2010 Acura RL | Owner's Manual - Page 299
    to enter your choice. NOTE: Choose silver metal (factory default) as the Day color to obtain the best display contrast. Choose black metal (factory default) as the Night color to obtain the best display contrast. Allows you to turn voice control system prompts ON or OFF . To select ON or OFF
  • 2010 Acura RL | Owner's Manual - Page 300
    . Examples of these reminders include: Driving with the parking brake on Driving with the trunk or a door open A reminder to fasten the driver's and front passenger's seat belts Features The third setup screen allows you to change the system's screen color and verbal reminders. To select a setup
  • 2010 Acura RL | Owner's Manual - Page 301
    . This may not be needed depending on how long the system was without power. Entering the Security Code If the battery goes dead or is disconnected for any reason, you will have to enter a security code into both the audio system and the compass system before you can use it again. 298 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 302
    system voice will not operate if the audio code is not entered Features GPS initialization Depending on the length of time the battery was disconnected, your system may require GPS initialization. If it does, the above screen appears. Follow the instructions on the screen. CONTINUED 299 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 303
    off the engine and restart the vehicle. If you now see the Disclaimer screen, the GPS initialization is complete. NOTE: The average acquiring time is less than 10 minutes, but it can take as long as 45 minutes. If the system is still unable to acquire a signal, follow the instructions on the screen
  • 2010 Acura RL | Owner's Manual - Page 304
    (U.S. model without navigation system) License notice You have acquired a THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT ALPINE ELECTRONICS, INC., FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE FOR SUCH USE. Features CONTINUED 301 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 305
    model without navigation system) NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided ''AS IS'' and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE WITH
  • 2010 Acura RL | Owner's Manual - Page 306
    without navigation system) If ALPINE affiliates reserve the right to discontinue any Internet-based services provided to you or made available to you through permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to
  • 2010 Acura RL | Owner's Manual - Page 307
    system, the climate control system and some functions of the compass system. The voice control system uses the TALK and BACK buttons on the steering wheel and a microphone near the map light on the ceiling. NOTE: While using the voice control system, all of the speakers are muted. 304 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 308
    System You should use the voice control system as much as possible, and consider manual system by voice: Press and release the Talk button. Wait for the beep. Give a voice command. Once the microphone picks up your command, the system changes system can then read the list of commands to you. Features
  • 2010 Acura RL | Owner's Manual - Page 309
    command, the system generally either or ''Please choose an area with the interface dial.'' the system is asking for input that cannot be done by voice. sure the airflow from the A/C vents does not interfere with the system microphone in the ceiling console. Place your hand over the microphone
  • 2010 Acura RL | Owner's Manual - Page 310
    , the system can read the commands for you. The commands are accessible at any time while driving and can be read to you so that you do not need to memorize all of them. Features same as CANCEL or BACK button) Cancel (cancels current activity) What time is it? Calendar CONTINUED 307 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 311
    Air conditioner off Air conditioner Climate control defrost on Climate control defrost off Climate control defrost Rear defrost on Rear defrost off Rear defrost floor) Climate control floor Climate control floor and defrost Fan speed up Fan speed down Fan speed ( : 1 7) (for best The system Drive
  • 2010 Acura RL | Owner's Manual - Page 312
    system accepts these audio system commands on most screens. There are no voice commands for XM radio. Radio Commands Features To control the radio system, say one of the following commands: Audio on Audio off Audio Radio switches (toggles) the function between On and Off. CONTINUED 309 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 313
    back DVD play next disc DVD play previous disc DVD track random DVD track repeat DVD disc repeat DVD track scan DVD disc scan DVD normal play (resumes ''Play'' from these commands: ''DVD track random,'' ''DVD track repeat,'' ''DVD disc repeat,'' ''DVD folder random,'' and ''DVD folder 310 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 314
    WMA play track ( : 1 30) WMA play disc 1 track 2 ( 1: The system accepts these commands on most screens. MP3 play MP3 play disc ( : 1 6) MP3 switches (toggles) the function between On and Off. 1 6, 2: 1 30) Features 1 6, 2: 1 30) MP3 skip forward MP3 skip back MP3 play next disc 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 315
    Contrast minimum/min Contrast maximum/max Black level up Black level down Black level minimum/min Black level maximum/max Volume up system accepts over 100 onscreen commands. The only commands that must be chosen by the interface dial are listed below. Next Previous Return OK Delete 312 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 316
    . Features Select the Clock Adjustment by turning the interface knob to the right, then press the center of the interface selector. Select the Time Adjustment , then press the center of the interface selector. The display changes to the Time Adjustment screen for HOUR. CONTINUED 313 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 317
    (U.S. model without navigation system) To adjust the hour, turn the interface knob, then press the center of the interface selector. To adjust the minute, turn center of the interface selector to enter the time. The screen will return to the Clock adjustment screen (see page 313 ). 314 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 318
    add other devices to it. Features SECURITY SYSTEM INDICATOR Once the security system is set, opening any door or the hood without using the built-in key or the remote will cause it to sound. It also sounds if the radio is removed from the dashboard or the audio system wiring is cut. 315 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 319
    open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather. Using Cruise Control CRUISE (ACC) BUTTON RES/ ACCEL BUTTON on the steering wheel, and hold it for 1 second (see page 333 ). 2. Accelerate to the desired cruising speed above 25 mph (40
  • 2010 Acura RL | Owner's Manual - Page 320
    the multiinformation display will come back on. Changing the Set Speed You can increase the set speed, release the button. Push on the accelerator pedal. Accelerate to the desired cruising speed, then press 1 mph (1.6 km/h). Tap the brake pedal lightly with your foot. The CRUISE CONTROL icon on the
  • 2010 Acura RL | Owner's Manual - Page 321
    to the same speed as before. Pressing the CRUISE (ACC) button turns the system completely off and erases the previous cruising speed. You can cancel cruise control in any of these ways: Tap the brake pedal. Push the CANCEL button on the steering wheel. Push the CRUISE (ACC) button. 318 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 322
    cruise control (ACC) consists of a radar sensor in the front grille, the ACC buttons on the steering wheel, and the ACC functions of the multi-information display. The radar sensor for ACC is shared with the collision mitigation brake system (CMBS). For more information on the radar sensor, see page
  • 2010 Acura RL | Owner's Manual - Page 323
    , ACC senses the change in distance and compensates by accelerating or braking your vehicle display. The ACC radar sensor in the front grille can detect and monitor the distance of service area, parking area, etc. In these areas, there is no vehicle ahead of you, and ACC would still try to accelerate
  • 2010 Acura RL | Owner's Manual - Page 324
    ACC can lead to a crash. Use ACC only when traveling on open highways in good weather. Features When there is no vehicle ahead within ACC range Your vehicle will maintain a set cruising speed. then follow at a constant distance until the vehicle ahead changes speed again. CONTINUED 321 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 325
    the vehicle ahead of you slows down abruptly, or if another vehicle cuts in front of you, a beeper sounds and a message appears on the multiinformation display to warn vehicle ahead of you slows down and changes lanes, ACC no longer tracks it. Your vehicle will then return to your set speed. 322
  • 2010 Acura RL | Owner's Manual - Page 326
    by momentarily applying the brakes or sounding a beeper under conditions such as a sudden curve or narrowing of the road, an abrupt movement of the steering wheel, or if you are in an unusual position within your lane. Features 323 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 327
    speed above 25 mph (40 km/h). 3. Press and release the SET/ DECEL button on the steering wheel, then release the accelerator pedal. If you press the SET/DECEL button when the vehicle speed is below 25 mph (40 goes into wait mode, and ''ACC'' is shown on the multiinformation display. 324 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 328
    the multiinformation display. Refer to page 328 for how to set and change the set distance between your vehicle and the vehicle ahead of you. If you change the speed unit measurement from the factory default setting, the initial speed unit measurement is shown under the current unit. 325 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 329
    hold the RES/ACCEL button. The vehicle will accelerate. When you reach the speed you want, accelerates to the set speed, the set speed on the multiinformation display will flash. If a vehicle ahead of you is driving will not sound while you press the accelerator pedal, no matter how close you get
  • 2010 Acura RL | Owner's Manual - Page 330
    your vehicle will return to the previously set speed. Detecting a Vehicle Ahead of You U.S. Features CANADA When the system detects a vehicle ahead of you, a beeper sounds once and a solid-line vehicle icon appears in small amounts, tap the SET/DECEL button repeatedly. CONTINUED 327 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 331
    vehicle in front will be set as shown below. Speed Vehicle Distance Long Middle Short 50 mph (80 km/h) 154 feet 47 meters 111 feet 34 meters 85 feet 26 meters 65 mph (104 km/h) 200 feet 61 meters 173 feet 42 meters 101 feet 31 meters CANADA When that vehicle changes lanes
  • 2010 Acura RL | Owner's Manual - Page 332
    the ACC button, the previously set cruising speed is erased from memory. Features U.S. MIDDLE RANGE CANADA ACC is canceled whenever you do any of these actions: Push the CANCEL button on the steering wheel. U.S. SHORT RANGE CANADA Tap the brake pedal. Press the ACC button. The ACC indicator in
  • 2010 Acura RL | Owner's Manual - Page 333
    etc.) When the radar sensor in the front grille gets dirty. The vehicle ahead of you cannot be detected. An abnormal tire condition is detected, or the tires are skidding. Driving on a mountainous road, or driving off road for extended periods. Abrupt steering wheel movement. When the ABS or VSA is
  • 2010 Acura RL | Owner's Manual - Page 334
    to the chart on this and the following page. Message Description ACC is on. Features U.S. ACC detects a vehicle ahead of you. You will hear a beep when the vehicle moves out of the ACC radar sensor's range. CANADA U.S. ACC does not detect a vehicle ahead of you. You will hear a beep when
  • 2010 Acura RL | Owner's Manual - Page 335
    Cruise Control (ACC) Message Description ACC has automatically cancelled because its radar sensor in the front grill is dirty. You will hear a beep about 1 second. Message Description Apply the brakes about 1 second. ACC needs to be checked. Have your vehicle checked by a dealer. 332 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 336
    Control (ACC) Switching to Cruise Control DISTANCE BUTTON Features Press the distance button. To switch from ACC to cruise control, press the distance button on the steering wheel, and hold it for 1 second. When you the vehicle ahead of you. Always be aware which mode is selected. 333 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 337
    doors, lighting, or home security systems. General Safety Information Before programming your HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an ''electronic eye,'' or other safety and reverse stop features. If your garage door
  • 2010 Acura RL | Owner's Manual - Page 338
    HomeLink Universal Transceiver If you are training the second or third buttons, go directly to step 1. Features CONTINUED 335 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 339
    received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible user's authority to operate the equipment. This device complies with Industry Canada Standard RSS-210. Operation is subject to the following two conditions
  • 2010 Acura RL | Owner's Manual - Page 340
    Acura Server. Working through the XM radio satellite, AcuraLink works in conjunction with the navigation system, Bluetooth HandsFreeLink (HFL), and audio system in your vehicle. It displays and receives several kinds of messages, including: Operating tips and information on your vehicle's features
  • 2010 Acura RL | Owner's Manual - Page 341
    message you want to read by pressing ENTER. To open a message: Press ENTER on the interface selector, then select New Message from the navigation system map menu. A red exclamation will be marked on an envelope icon with an important message. Press the INFO button. The information screen will be
  • 2010 Acura RL | Owner's Manual - Page 342
    problem that may need immediate attention (see page 341 ). After purchasing your vehicle, messages may not appear immediately. Your dealer has to register the vehicle identification before you can receive messages. This can take several days to process. Message Options Features 339 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 343
    dealer using the navigation system. Call Your Dealer Select this option to call the Acura dealer you purchased your vehicle from. AcuraLink also directs you to this dealer so you can schedule a maintenance appointment or receive information about a message. If your assigned servicing dealer changes
  • 2010 Acura RL | Owner's Manual - Page 344
    Messages command does not apply to Diagnostic Info and Recall messages. They can only be deleted by your dealer. Press the SETUP button to view the setup screen. Select Other by pushing the interface selector to select the category by pressing ENTER on the interface selector. Features 341 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 345
    ownership experience. For additional information, call Acura Client Services directly through the HFL. During the first 90 days of ownership, a number of messages appears each day. These messages help you to use and understand the features of your vehicle. Quick Tips Feature Guide 342 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 346
    visit the My Acura website at www.owners.acura.com, register some required settings, and complete the Phone-Data Connection set-up (see page 352 ). Your Bluetooth compatible phone should also be paired and linked to your vehicle's Bluetooth HFL (see page 354 ). Features CONTINUED 343 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 347
    message, then press ENTER. You will see the message as shown. To make an appointment, select ''Schedule Dealer Appt.'' then press ENTER. The system will automatically connect to the Acura server, then show you an appropriate appointment date and time on the navigation screen. If you accept this
  • 2010 Acura RL | Owner's Manual - Page 348
    Dealer Appointment To reschedule the appointment: Features The confirmation message will be displayed on the screen. Make sure to confirm the appointment date, time and dealer. If it is OK, press ENTER. If you want to change ENTER. The system will automatically connect to the Acura server, then
  • 2010 Acura RL | Owner's Manual - Page 349
    the appointment, select ''Cancel Appointment,'' then press ENTER. The system will request you to confirm the cancel on the navigation screen. screen goes back to the previous message display. The system will automatically connect to the Acura server, then show you the confirmation on the navigation
  • 2010 Acura RL | Owner's Manual - Page 350
    change or reschedule the appointment date, call your dealer directly with HFL. Using automated appointment, your registered dealer through My Acura is automatically selected. If you want to select another dealer your dealer for an appointment or to find the nearest dealer. CONTINUED 347 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 351
    your current phone number. Please update your information using My Acura at www.owners.acura.com. Diagnostic Info When an indicator comes on or handle the problem as it occurs, preventing or limiting costly repairs. The AcuraLink system cannot determine some mechanical problems (such 348 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 352
    from the Acura server. When you make an appointment through My Acura's online Schedule Service Appointment, you can be reminded in advance about that appointment through AcuraLink. If you need to reschedule or cancel the appointment, see page 345 . Reminder Message Features CONTINUED 349 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 353
    website. Appointments can still be created, rescheduled, and canceled from the vehicle; however the appointment information stored in the vehicle will not be updated. Any changes to those appointments should be made from the My Acura website. AcuraLink/Message Screen 350 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 354
    a certified technician after the recall is done or the problem is corrected, or through a broadcast message from Acura. New Message Notification Select ON if you want to , visit the My Acura website at www.owners. acura.com to change your messaging preferences. Features CONTINUED 351 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 355
    information when a problem occurs. NOTE: For the Phone Data Connection button to be active, you need a Bluetooth compatible and enabled cell phone paired to the Bluetooth HandsFreeLink (HFL). To complete the data connection setup, the paired phone must have a compatible data service. 352 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 356
    Bluetooth compatible and enabled cell phones, visit www.acura.com/handsfreelink or call the HandsFreeLink consumer support at 1-888-528-7876. In Canada, visit www.acura.ca, or call 1-866-78ACURA. Connect to the Acura that may cause undesired operation. Changes or modifications not expressly approved
  • 2010 Acura RL | Owner's Manual - Page 357
    feature capabilities: In the U.S., visit www.acura.com/ handsfreelink , or call (888) 528-7876. In Canada, visit www.acura.ca, or call (866) 78-ACURA . Air or wind noise from the dashboard and side vents and windows may interfere with the microphone. Adjust or close them as necessary. 354 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 358
    7890'' or ''Dial Peter.'' When HFL is in use, navigation voice commands cannot be recognized. To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls. Help Features To hear general HFL information, including help on pairing a phone or setting up the
  • 2010 Acura RL | Owner's Manual - Page 359
    see ''HF LINK'' on the upper display. ROAM STATUS PHONE DIALING Some phones may send battery, signal strength, and roaming status information to HFL. A notification that there is an incoming call, or HFL is in use, will appear on the navigation screen when the audio system is on. 356 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 360
    Bluetooth HandsFreeLink How to Use HFL The ignition switch must be in the ACCESSORY (I) or ON (II) position. ''Pair'' ''Edit'' ''Phone Setup'' ''Delete'' ''List'' Press HFL Talk button ''Status'' ''Next Phone'' ''Set Pairing Code'' Pair a phone to the system (See page 360) Edit the name of a
  • 2010 Acura RL | Owner's Manual - Page 361
    Bluetooth HandsFreeLink ''Redial'' ''Transfer'' ''Mute'' ''Send'' Press HFL Talk button of an existing phonebook entry (See page 366) Delete a phonebook entry (See page 366) If your phone supports this function, use this to transfer contacts from your phone to HFL (See page 367) Hear a list of
  • 2010 Acura RL | Owner's Manual - Page 362
    Notification'' ''Auto Transfer'' Press HFL Talk button ''Clear'' Apply a security passcode to the system that must be input at each key cycle to access the system (See page 372) Change your security passcode (See page 372) Features Set how you would like to be notified of an incoming call (See page
  • 2010 Acura RL | Owner's Manual - Page 363
    Bluetooth-compatible cell phone to the system manual. Up to six phones can be paired. Your phone's battery may drain faster when it is paired to HFL. If after three minutes your phone is not ready to pair or a phone is not found, the system your phone finds a Bluetooth device, select HFL from
  • 2010 Acura RL | Owner's Manual - Page 364
    linked again. Features 2. Say ''Edit '' after the prompts. 2. Say ''List '' after the prompts. 3. If there is more than one phone paired to the system, HFL will ask you which phone's name you want to change. Follow the . 3. HFL will tell you which phone is linked to the system. 361 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 365
    Bluetooth HandsFreeLink To change the pairing code setting: Press and after you remove the key from the ignition switch. However, this may weaken the vehicle's battery. To make a call using a phone number: Press and release the HFL Talk button before called through the audio speakers. 362 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 366
    Bluetooth HandsFreeLink To make a call using a name in to confirm the name and make the call. To redial the last number called by HFL: Features 1. Press the INFO button, then select ''Cellular Phonebook .'' 2. Select ''Search Imported Phonebook .'' and say ''Redial.'' CONTINUED 363 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 367
    Bluetooth HandsFreeLink Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on. Press the HFL Talk button to answer the call, or the original call and answer the new call, press the HFL Back button. 364 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 368
    Bluetooth names during a call. This is useful when you call a menu-driven phone system. To send a name or number during a call: Phonebook You can store be sent during a menu-driven call. To store a phonebook entry: Features Press and release the HFL Talk button before a command. 1. Say 365 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 369
    Bluetooth HandsFreeLink NOTE: Avoid using duplicate name entries. Avoid using ''home'' as a name entry. It is easier for HFL to recognize a ''Phonebook .'' 2. Say ''Delete'' after the prompts. 3. Say the name you want to delete and follow the HFL prompts to complete the deletion. 366 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 370
    Bluetooth HandsFreeLink To list all names in that are compatible with this feature: In the U.S., visit www.acura.com/ handsfreelink , or call (888) 528-7876. In Canada, visit www.acura.ca, or call (866) 78-ACURA. Features 3. HFL begins reading the to store another number. CONTINUED 367 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 371
    Bluetooth HandsFreeLink Import Cellular Phonebook: Search Imported Phonebook: The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system. Once a phonebook list of imported phonebooks will be displayed. Select a phonebook from the list. 368 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 372
    Work Fax Car Voice Other List option Delete Imported Phonebook: You can delete any imported phonebook. Select ''Delete Imported Phonebook ,'' and a list of imported phonebooks will be displayed. Features Select a number you want to call, and press the HFL Talk button. CONTINUED 369 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 373
    Bluetooth HandsFreeLink After making a selection, the following screen will appear. PIN Number You can add, change, or remove a PIN number from any phonebook. To change complete the deletion. Select the phonebook you want. The display will change as shown above. To add a PIN: If you have selected
  • 2010 Acura RL | Owner's Manual - Page 374
    not use PIN'' after you enter the current PIN. System Setup This command group allows you to change or customize HFL basic settings. Features The display will change as shown above. Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification. CONTINUED 371 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 375
    Bluetooth HandsFreeLink To set a 4-digit passcode to lock the HFL system for security purposes: To change your security pass code: To select either a ring tone or a prompt as the incoming call notification : Press and release the HFL Talk button before a command. 1. Say ''System setup.'' 2. Say ''
  • 2010 Acura RL | Owner's Manual - Page 376
    for the passcode, say ''System clear.'' Paired phones, all names in the HFL phonebook and all imported phonebook data will be lost. Press and release the HFL Talk button before a command. 1. Say the language you want to change to in that language. 2. Follow the HFL prompts. Features 373 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 377
    Language Canadian models only To change the system language between English and French: Bluetooth Wireless Technology The Bluetooth name and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade
  • 2010 Acura RL | Owner's Manual - Page 378
    reverse (R) with the ignition switch in the ON (II) position, the rearview is shown on the navigation system screen. For the best picture, always keep the rearview camera clean, and do not cover the camera lens. To avoid scratching the lens when you clean it, use a moist, soft cloth. 375 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 379
    376 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 380
    Fuel Recommendation ...378 Service Station Procedures ...379 Refueling...379 Tighten Fuel Cap Message ...381 Opening and Closing the Hood ...381 Oil Check ...383 Engine Coolant Check ...383 Fuel Economy ...384 Accessories and Modifications ...387 Carrying Cargo ...389 Before Driving 377 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 381
    drive during the first 600 miles (1,000 km). During this period: Avoid full-throttle starts and rapid acceleration. Avoid hard braking for the first 200 miles (300 km). Do not change help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and
  • 2010 Acura RL | Owner's Manual - Page 382
    not contain MMT, contact your dealer or visit My Acura at owners.acura.com (In Canada, visit www.myacura.ca). 1. Park with the driver's side closest to the service station pump. 2. Open the fuel fill door by pressing the button in the driver's door (to open the fuel fill door manually, see page 503
  • 2010 Acura RL | Owner's Manual - Page 383
    . This leaves some room in the fuel tank for the fuel to expand with temperature changes. If the fuel nozzle keeps clicking off even though the tank is not full, there may be a problem with your vehicle's fuel vapor recovery system. The system helps keep fuel vapor from going into the atmosphere
  • 2010 Acura RL | Owner's Manual - Page 384
    Service Station Procedures Tighten Fuel Cap Message replace the fuel fill cap. To scroll to another message, press the INFO button. The ''TIGHTEN FUEL CAP'' message will appear each time you restart the engine until the system turns the message off. If the system still detects a leak in the vehicle
  • 2010 Acura RL | Owner's Manual - Page 385
    of the way. The hydraulic supports will lift it up the rest of the way and hold it up. To close the hood, lower the hood to about a foot (30 cm) above the fender, then firmly press down on the front edge of the hood. Make sure it is securely latched. 382 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 386
    Service Station Procedures Oil Check DIPSTICK Engine Coolant Check RESERVE TANK UPPER MARK LOWER MARK MAX MIN Before Driving Wait a few minutes after turning the engine below the lower mark, see Adding Engine Oil on page 452 . Look at line, see Adding Engine Coolant on page 455 . Refer to
  • 2010 Acura RL | Owner's Manual - Page 387
    Fuel Economy Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all
  • 2010 Acura RL | Owner's Manual - Page 388
    lower your vehicle's fuel economy: Aggressive driving (hard acceleration and braking) Excessive idling, accelerating and braking in stop-and-go traffic Cold engine operation (engines are more efficient when warmed up) Driving with a heavy load or the air conditioner running Improperly inflated tires
  • 2010 Acura RL | Owner's Manual - Page 389
    the air conditioning system The A/C puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible. Plan and combine trips Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one. Calculating Fuel Economy Measuring
  • 2010 Acura RL | Owner's Manual - Page 390
    , and cause a crash in which you can be hurt or killed. Follow all instructions in this owner's manual regarding accessories and modifications. When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle's computer controlled
  • 2010 Acura RL | Owner's Manual - Page 391
    smaller wheels and tires can interfere with the operation of your vehicle's anti-lock brakes and other systems. Modifying your steering wheel or any other part of your vehicle's safety systems could make the systems ineffective. If you plan to modify your vehicle, consult your dealer. 388 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 392
    Your vehicle has several convenient storage areas: Glove box Front door and seat-back pockets Console compartment Center pocket Trunk In of cargo, be sure to read the following pages. Before Driving CONSOLE COMPARTMENT FRONT DOOR POCKET CENTER POCKET TRUNK SEAT-BACK POCKETS GLOVE BOX 389
  • 2010 Acura RL | Owner's Manual - Page 393
    this manual. driver and passengers that will be riding in your vehicle. (3)Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer. 390 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 394
    , accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver's doorjamb. Before Driving Example (850 lbs) Passenger Weight (150 lbs x 5 = 750 lbs) Cargo Weight (100 lbs) 391 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 395
    lid, exhaust gas can enter the passenger area. To avoid the possibility of carbon monoxide poisoning, follow the instructions on page 56 . If you carry any items on a roof rack, be sure the total weight of the rack and the items does not exceed 121 lbs (55 kg). If you use an accessory roof
  • 2010 Acura RL | Owner's Manual - Page 396
    be used to install the cargo net for securing items. The side cargo hooks are designed to hold light items (maximum load: 6 lbs or 3 kgs for each hook). Heavy objects may damage the side hooks. The cargo floor hooks can also be used to tie down and secure items on the floor. 393 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 397
    394 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 398
    -All Wheel DriveTM (SH-AWD ) system, the vehicle stability assist (VSA) system, the tire pressure monitoring system (TPMS), the collision mitigation brake system (CMBS), and facts you need if you are planning to tow a trailer. Preparing to Drive ...396 Starting the Engine...397 Check Starting System
  • 2010 Acura RL | Owner's Manual - Page 399
    you drive your vehicle. 1. Make sure all windows, mirrors, and outside lights are fastened down securely. 8. Make sure the doors and the trunk are securely closed and locked page 17 ). 10.When you start the engine, check the gauges and indicators in the wheel adjustment (see page 148 ). 396 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 400
    the START (III) position, this feature keeps the engine's starter motor running until the engine starts. Follow these instructions to start the engine: 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Make sure the shift lever
  • 2010 Acura RL | Owner's Manual - Page 401
    . Even though you may be able to start the engine manually without the auto control mode of the starting system, have your dealer inspect your vehicle. If there is a problem with the starting system, you will see a ''CHECK STARTING SYSTEM'' message on the multi-information display when the ignition
  • 2010 Acura RL | Owner's Manual - Page 402
    If it flashes while driving (in any shift position), it indicates a possible problem in the transmission. If the malfunction indicator lamp comes on along with the ''D'' indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission
  • 2010 Acura RL | Owner's Manual - Page 403
    to another gear. Drive (D) Use this position for your normal driving. The transmission automatically adjusts to keep the engine at the best speed for the driving conditions. To shift from engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal
  • 2010 Acura RL | Owner's Manual - Page 404
    the S position, press the release button on the front of the shift lever, and move the lever to , you may feel the engine cut in and out. This is caused by a limiter in the engine's computer controls. The engine will run normally when you reduce the (0) position. Driving CONTINUED 401 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 405
    the cover is on the driver's side. Press the brake pedal, and restart the engine. If you need to use the shift lock release, it means your vehicle is developing a problem. Have the vehicle checked by a dealer. COVER SHIFT LOCK RELEASE and move the shift lever out of Park to neutral. 402 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 406
    drive mode (D)] to the D-paddle shift mode. You can shift the transmission up or down manually with the paddle shifters. Downshifting gives you more power when climbing, and provides engine Driving To shift up or down, use the (right) or (left) paddle shifter on either side of the steering wheel.
  • 2010 Acura RL | Owner's Manual - Page 407
    the vehicle comes to a complete stop and the vehicle speed is about 9 mph (15 km/h). If there is a problem in the transmission while you are driving with the paddle shifters, the D indicator flashes, the D-paddle shift mode is canceled, and the transmission returns to drive mode (D). 404 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 408
    manually upshift between first and fifth gears. Make sure you upshift before the engine speed reaches the tachometer's red zone. The transmission remains in the selected gear (5, 4, 3, 2, or 1). There is no automatic downshift when you push the accelerator pedal to the floor. When you are driving
  • 2010 Acura RL | Owner's Manual - Page 409
    Driving with the Paddle Shifters Downshifting with the paddle shifter allows you to increase the engine braking when going down steep or long hills, and provides more power when climbing uphills. You can upshift the transmission manually engine 27 km/h) over 38 mph (60 km/h) Speed range To Shift from
  • 2010 Acura RL | Owner's Manual - Page 410
    Driving TORQUE INDICATOR The SH-AWD torque distribution monitor on the multi-information display shows you the amount of torque being sent to the wheels. Each wheel right front (RF), left front (LF), right rear (RR), and left rear (LR) has its own torque indicator. CONTINUED 407 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 411
    '' message also appears on the multiinformation display, there is problem with the SH-AWD system. Your vehicle still has normal frontwheel drive with vehicle stability assist (VSA), but does not have the advantages of SH-AWD. Have your vehicle checked by a dealer as soon as possible. 408 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 412
    them with you. Lock the doors. If the vehicle is facing downhill, turn the front wheels toward the curb. Check the indicator on the instrument panel to verify that the security system is set. Make sure the parking brake is fully released before driving away. Driving with the parking brake partially
  • 2010 Acura RL | Owner's Manual - Page 413
    , fuel economy can be reduced. It also keeps your brake lights on all the time, confusing drivers behind you. Constant application of the brakes when going down a long hill builds up heat and reduces their effectiveness. Use the engine to assist the brakes by taking your foot off the accelerator and
  • 2010 Acura RL | Owner's Manual - Page 414
    (ABS) The anti-lock brake system (ABS) helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it. The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking
  • 2010 Acura RL | Owner's Manual - Page 415
    also be shut down. Test your brakes as instructed on page 502 . If the brakes feel normal, drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control. The VSA indicator
  • 2010 Acura RL | Owner's Manual - Page 416
    if you turn the steering wheel to avoid the collision. When the CMBS activates, the brake lights also come on. RADAR SENSOR BRAKE ACTUATOR SEAT BELT e-PRETENSIONERS Driving The CMBS consists of a radar sensor in the front grille, a brake actuator in the engine compartment, an indicator on the
  • 2010 Acura RL | Owner's Manual - Page 417
    Brake System (CMBS) Radar Sensor BOLTS (Do not tamper) Do not allow anything to impact the radar sensor or the radar sensor cover. If either of these parts receives a strong impact, turn off the system by pressing the CMBS off switch, and have your vehicle checked by a dealer. If the front grille
  • 2010 Acura RL | Owner's Manual - Page 418
    System (CMBS and do not make any modifications to the suspension (see Accessories and Modifications on page 387 ). The tires are not correctly CMBS is on, the radar sensor constantly scans f or vehicles ahead of you. This means that driving on a road with a f ew or no vehicles could cause a CHECK CMBS
  • 2010 Acura RL | Owner's Manual - Page 419
    , press the CMBS OFF switch on the dashboard for about 1 second. When you do this, a beeper sounds, a CMBS indicator on the instrument panel comes on, and a CMBS OFF message appears on the multi-information display. To turn the system back on, press the switch again for about 1 second. 416 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 420
    tire, etc.). Extended off-road or mountainous driving. Driving your vehicle with the parking brake applied. Driving your vehicle in bad weather (rain, fog, snow, etc.). A dirty emblem on the front grille. The CMBS will automatically recover when these conditions are improved. Driving 417 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 421
    Mitigation Brake System (CMBS) CMBS Indicator CMBS INDICATOR The CMBS indicator normally comes on under these conditions: When you manually turn off the system. When the system shuts off automatically. When you drive in bad weather (rain, snow, fog, etc.). If anything covers the front grille (dirt
  • 2010 Acura RL | Owner's Manual - Page 422
    A vehicle cuts in front of you and brakes suddenly. When you accelerate rapidly and approach the vehicle ahead of you at high speed. Immediately after you drive off. Driving in heavy, stop-and-go traffic. The vehicle ahead of you is a motorcycle or other small vehicle. CONTINUED 419 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 423
    no chance of a collision, the CMBS may activate under these conditions: When you change lanes quickly, then overtake the vehicle ahead of you. A vehicle suddenly crosses in front of you. When you approach or pass a vehicle ahead of you that is turning left or right in an intersection. 420 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 424
    Collision Mitigation Brake System (CMBS) YOUR VEHICLE LOW BRIDGE RAILS SIGN, POLE, etc. Driving When you pass a low or the state of your vehicle (turning angle, lane position, etc.), CMBS can sometimes mistake a stationary object (light pole, traffic sign, etc.) as a vehicle ahead of you and
  • 2010 Acura RL | Owner's Manual - Page 425
    CMBS, it is still your responsibility to operate the brake pedal and steering wheel appropriately, according to the driving may cause undesired operation. Changes or modifications not expressly approved equipment. This device complies with Industry Canada Standard RSS-210. Operation is subject to
  • 2010 Acura RL | Owner's Manual - Page 426
    474 for tire inflation guidelines. If there is a problem with the TPMS, this indicator begins to flash. It stops flashing after approximately 1 minute, then stays on. You will also see a ''CHECK TPMS SYSTEM'' message on the multi-information display (see page 427 ). CONTINUED Driving 423 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 427
    tire repaired by your dealer as soon as possible. Each wheel is equipped with a tire pressure sensor mounted inside the tire behind the valve stem. You must use TPMS specific wheels. It is recommended that you always have your tires serviced by your dealer or a qualified technician. 424 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 428
    Driving When all tire pressures are normal, the multi-information display will show ''TIRE PRESSURE OK SYSTEM FUNCTION NORMAL.'' When any of the tires has low pressure, the multi-information display shows a ''TIRE PRESSURE ERROR SYSTEM blinking in the display (see page 79 ). CONTINUED 425 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 429
    the tires to the specified values, have your dealer check the system as soon as possible. Tire Pressure Readings U.S. CANADA When the TPMS is functioning normally, you ). When cruise control is on while driving, the pressure reading cannot be checked by the tire pressure monitor on the
  • 2010 Acura RL | Owner's Manual - Page 430
    shows a ''SYSTEM FUNCTION ERROR'' message. The system may not be able to detect or signal low tire pressure as intended. Also, the tire pressure readings will not be displayed. Have your vehicle checked by a dealer as soon as possible. CONTINUED Check TPMS System Message Driving 427 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 431
    system off by pressing the VSA OFF switch again. When you restart the vehicle with the compact spare tire, the TPMS system message will also be displayed on the multi-information display after several miles (kilometers) driving . Changes or complies with Industry Canada Standard RSS-210.
  • 2010 Acura RL | Owner's Manual - Page 432
    you may notice that the engine does not respond to the accelerator in the same way it does at other times. There may also be some noise from the VSA hydraulic system. You will also see the VSA activation indicator blink. The VSA system cannot enhance the vehicle's driving stability in all situations
  • 2010 Acura RL | Owner's Manual - Page 433
    VSA system is off, the traction control system is driving your vehicle with the VSA and traction control systems system back on. VSA is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle. VSA and Tire Sizes Driving with varying tire or wheel
  • 2010 Acura RL | Owner's Manual - Page 434
    and performance. It can also damage the engine and drivetrain. Tongue Load: The weight that the tongue of a fully-loaded trailer puts on the hitch should be approximately 10 percent of the trailer weight. Too much tongue load reduces front-tire traction and steering control. Too little tongue
  • 2010 Acura RL | Owner's Manual - Page 435
    60% of the load toward the front of the trailer and 40% toward the rear, then re-adjust the load as needed. Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories used on your vehicle must be properly bolted to the underbody. 432 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 436
    your local trailer sales or rental agencies for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle. Since lighting and wiring vary can cause damage to your vehicle's electrical system and affect your vehicle warranty. Driving CONTINUED 433 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 437
    preparing to tow, and before driving away, be sure to check the following: The vehicle has been properly serviced, and the suspension and the cooling system are in good operating condition. The trailer has been properly serviced and is in good condition, and the lights and brakes on the trailer are
  • 2010 Acura RL | Owner's Manual - Page 438
    driving with a trailer requires some special driving skills and techniques. For your safety and the safety of others, take time to practice driving Drive slower than normal in all driving situations level roads. See ''Driving on Hills'' in the and it can hit or run over something the vehicle misses.
  • 2010 Acura RL | Owner's Manual - Page 439
    be towed behind a motor home. If your vehicle needs to be towed in an emergency, see page 513 . Always drive slowly and have someone guide you when backing up. Grip the bottom of the steering wheel; turn the wheel to the left to get the trailer to move to the left, and turn the
  • 2010 Acura RL | Owner's Manual - Page 440
    Fluid...458 Brake Fluid ...460 Power Steering Fluid ...460 Timing Belt ...461 Lights ...462 Dust and Pollen Filter ...470 Cleaning the Seat Belts ...470 Floor Mats ...471 Wiper Blades ...472 Wheels ...474 Tires ...474 Checking the Battery ...483 Vehicle Storage ...486 Maintenance 437 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 441
    the battery and all fuel-related parts. Wear eye protection and protective clothing when working with the battery or compressed air. Injury from moving parts. Do not run the engine unless instructed to do so. Improperly maintaining this vehicle, or failing to correct a problem before driving can
  • 2010 Acura RL | Owner's Manual - Page 442
    remaining engine oil life displayed on the lower right corner on the multi-information display as a percentage, turn the ignition switch to the ON (II) position, and press the SEL/RESET button on the steering wheel repeatedly until the engine oil life appears (see page 73 ). CONTINUED 439 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 443
    main items and sub items. Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message ''OIL LIFE'' along with the percentage of oil life remaining and the maintenance item code(s), appear on the lower part of the multiinformation display. 440 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 444
    wheel is pressed. Press the or button to see the message again. Maintenance When the remaining engine oil life is 1 to 5 percent, the multi-information display shows a ''SERVICE RESET button on the steering wheel repeatedly to select the engine oil life. The message ''SERVICE OIL LIFE'', along with
  • 2010 Acura RL | Owner's Manual - Page 445
    change (see page 447 ). Your dealer will reset the display after completing the required maintenance service . If maintenance service is done by someone other than your dealer, reset the CANADA 3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine
  • 2010 Acura RL | Owner's Manual - Page 446
    button on the steering wheel repeatedly to select the engine oil life minder. The message ''SERVICE OIL LIFE'', along with ''0%'', and the maintenance item code are displayed on the lower part of the multiinformation display when the calculated engine oil life is 0 percent. CONTINUED 443 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 447
    models). The message will be canceled if the or button on the steering wheel is pressed. Press the or button to see the message again. MAINTENANCE ITEM CODE(S) CANADA If the indicated required service is not done and the remaining engine oil life becomes 0%, the multiinformation display will show
  • 2010 Acura RL | Owner's Manual - Page 448
    the display without performing the service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed. Maintenance U.S. CANADA TOTAL PAST DUE MILEAGE When you press the
  • 2010 Acura RL | Owner's Manual - Page 449
    will not void your emissions warranties. However, Acura recommends that all maintenance services be performed in accordance with the 474 . Lights Check the operation of the headlights, parking lights, taillights, high-mount brake light, and license plate lights monthly. See page 462 . 446 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 450
    and condition of fluids Exhaust system Fuel lines and connections Maintenance Minder : If the message ''SERVICE DUE NOW'' does not appear more than 12 months after the display is reset, change the engine oil every year. : See information on maintenance and emissions warranty on page 446. NOTE
  • 2010 Acura RL | Owner's Manual - Page 451
    Items Rotate tires Replace air cleaner element If you drive in dusty conditions, replace every 15,000 miles (24,000 km). Replace dust and pollen filter If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every
  • 2010 Acura RL | Owner's Manual - Page 452
    FLUID (Black cap) ENGINE OIL FILL CAP AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop) WASHER FLUID (Black cap) Maintenance POWER STEERING FLUID (Red cap) RADIATOR CAP ENGINE COOLANT RESERVOIR : The power steering fluid reservoir is located under the right compartment cover. 449 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 453
    engine compartment are protected by several covers. You may need to remove the covers when you perform some simple maintenance work. All of the covers are secured by holding clips. To remove the battery fastener head. To remove the front bulkhead cover: 1. Remove the battery cover. 2. Remove the
  • 2010 Acura RL | Owner's Manual - Page 454
    the center of each fastener head. To remove the right engine compartment cover: 1. Remove the battery and front bulkhead covers (see page 450 ). 2. Remove the holding proper positions. Maintenance RIGHT ENGINE COMPARTMENT CLIPS LEFT ENGINE COMPARTMENT CLIPS CLIP : Push to remove clip : Push
  • 2010 Acura RL | Owner's Manual - Page 455
    for optimum engine protection. Make sure the API Certification Seal says ''For Gasoline Engines.'' The oil viscosity or weight is provided on the container's label. 5W-20 oil is formulated for yearround protection of your vehicle to improve cold weather starting and fuel economy. 452 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 456
    collect contaminants that can damage your engine if they are not removed regularly. Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service stationtype hydraulic lift for this service. Unless you have the knowledge and
  • 2010 Acura RL | Owner's Manual - Page 457
    drain. A special wrench (available from your dealer) is required. Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter. 4. Install a new oil filter according to the instructions that come with it. 454 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 458
    scalding you. Always let the engine and radiator cool down before removing the radiator cap. RESERVE TANK Maintenance If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. CONTINUED 455 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 459
    1. Lift up the lid on the front bulkhead cover from the front. 2. When the radiator and engine are cool, relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without up any spill immediately; it could damage components in the engine compartment. 456 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 460
    Engine Coolant 5. Put the radiator cap back on, and tighten it fully. 6. Pour coolant into the 7. Reinstall the lid. Do not add any rust inhibitors or other additives to your vehicle's cooling system. They may not be compatible with the coolant or engine components. Maintenance 457 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 461
    cloth. This will help to condition them. NOTICE: Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. level ground. Start the engine, let it run until the radiator fan comes on, then shut off the engine. For accurate results, wait about 60 seconds (but no
  • 2010 Acura RL | Owner's Manual - Page 462
    transmission f luid other than Acura ATF-Z1 may cause deterioration in transmission operation and durability, and could result in damage to the transmission. Damage resulting f rom the use of transmission f luid other than Acura ATF-Z1 is not covered by the Acura new vehicle warranty. 459 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 463
    worn brake pads. LOWER LEVEL After removing the right engine compartment cover (see page 451 ), check the level on the side of the reservoir when the engine is cold. The fluid should be between the UPPER LEVEL and LOWER LEVEL. If not, add power steering fluid to the UPPER LEVEL mark. 460 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 464
    . Check the fluid level frequently, and have the system inspected as soon as possible. Timing Belt The timing belt should be replaced at the intervals shown on the maintenance minder. Replace the belt at 60,000 miles (100,000 km) if you regularly drive your vehicle in one or more of these conditions
  • 2010 Acura RL | Owner's Manual - Page 465
    bulbs. High voltage can remain in the circuit even with the light switch off and the key removed. Because of this, you should not attempt to examine or change a low beam headlight bulb yourself. If a low beam headlight bulb fails, take the vehicle to your dealer to have it replaced. 462 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 466
    bulbs which are also used for the daytime running light. Handle it by its base and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. 1. Remove the left or right side engine compartment cover from the side you are
  • 2010 Acura RL | Owner's Manual - Page 467
    7. Reinstall the engine compartment side cover. 8. (Driver's side) Reinstall the battery cover. 2. Front Turn Signal Light Bulb 1. Remove the left or right side engine compartment cover from the side you are working on by carefully pulling the cover out (see page 451 ). BULB SOCKET 464 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 468
    ) Reinstall the battery cover. Replacing a Front Parking/Side Marker Bulb 1. Remove the left or right side engine compartment cover (see page 451 ). 2. (Passenger's side) Use a flat-tip screwdriver to remove the holding clip from the windshield washer reservoir. Maintenance CONTINUED 465 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 469
    the windshield washer reservoir. Reinstall the engine compartment side cover. 9. (Driver's side) Reinstall the battery cover. BULB Replacing a Fog Light Bulb Your vehicle uses halogen light bulbs. When replacing a bulb, scratch on the glass can cause the bulb to overheat and shatter. 466 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 470
    the bulb by turning it onequarter turn counterclockwise. 8. Reinstall the two undercover bolts on the side under cover and tighten them securely. Put the holding clip back on the side undercover and push on the center until it locks (the center is flush with the head). Maintenance 467 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 471
    the trim straight back. 4. Remove the two mounting bolts with an 8 mm wrench. 5. Pull the taillight assembly straight back out of the body. 6. Remove the socket by turning it one-quarter turn counterclockwise. 7. Remove the burned out bulb by pulling it straight out of its socket. 468 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 472
    the trunk. 2. Remove the light assembly cover by pulling its outside edge. 3. Remove the socket from the light assembly by turning it one-quarter turn counterclockwise. 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. CONTINUED 469 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 473
    . Have your dealer replace the filter when this service is indicated by a maintenance message on the multiinformation display. It should be replaced every 15,000 miles (24,000 km) if you drive primarily in urban areas that have high concentrations of soot in the air, or if the flow from the climate
  • 2010 Acura RL | Owner's Manual - Page 474
    to the floor mat anchors. Your vehicle is equipped with front passenger's seat weight sensors. If the rear passenger's floor mat is on the seat rail of the front passenger's seat, the sensors will detect the decreased weight on the seat, and they may not work properly. Maintenance 471 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 475
    from the arm. Do not open the hood when the wiper arms are raised, or you will damage the hood and the wiper arms. 472 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 476
    edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. 473 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 477
    the TPMS. Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed. Follow all instructions in this owner's manual regarding tire inflation and maintenance. 474 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 478
    gauge. Use a gauge to measure the air pressure in each tire at least once 1 mile (1.6 km). Add or release air, if needed, to match the recommended cold reading. This is normal; do not release air to match the cold pressure. The tires will loss is due to a tire problem and not due to a variation
  • 2010 Acura RL | Owner's Manual - Page 479
    driving conditions. Normal Driving Tire Size/Type P245/45R18 96V Cold Tire Pressure Front 32 psi (220 kPa , 2.2 kgf/cm ) Rear 30 psi (210 kPa , 2.1 kgf/cm ) 60 speed driving are not on the label on the driver's doorjamb, contact your dealer for more information about the tire pressures. 476 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 480
    , be sure to readjust the tire pressure for normal driving. You should wait until the tires are cold before adjusting the tire pressure. Tire Inspection Every time you check wet roads. You should replace the tire if you can see three or more tread wear indicators. Maintenance 477 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 481
    Tires Tire Service Life The service life of your tires is dependent on many factors, including, but not limited to, driving habits, road is also recommended that all tires, including the spare, be removed from service after 10 years from the date of manufacture, regardless of their condition or
  • 2010 Acura RL | Owner's Manual - Page 482
    multi-information display. Move the tires to the positions shown in the illustration each time they are rotated. If you purchase directional tires, rotate only front-to-back. When the tires are rotated, make sure the air pressures are checked. CONTINUED 479 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 483
    ever need to replace a wheel, make sure the wheel's specifications match those of the original wheel that came on your vehicle. Replacement wheels are available at your Acura dealer. Wheels and Tires Wheels: 18 x 8.0J AL the size and type of tires recommended in this owner's manual. 480 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 484
    required by driving conditions or local laws. Install them only on the front tires. Because your vehicle has limited tire clearance, Acura strongly recommends using the chain listed below, made by Security Chain Company (SCC). Cable-type: SCC Radial Chain SC1042 Maintenance CONTINUED 481 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 485
    all instructions in this owner's manual regarding the selection and use of tire chains. Traction devices that are the wrong size or improperly installed can damage your vehicle's brake lines, suspension, body, and wheels. Stop driving if they are hitting any part of the vehicle. 482 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 486
    window. The label on the battery explains the test indicator's colors. To see the label, remove the battery cover (see page 485 ). If additional battery maintenance is needed, see your dealer or a qualified technician. WARNING: Battery posts, terminals, and related accessories contain lead and lead
  • 2010 Acura RL | Owner's Manual - Page 487
    in the frequency display. Use the preset buttons to enter the code (see page 280 ). If your vehicle's battery is disconnected or goes dead, the power tilt and telescopic steering wheel system will be disabled. The system needs to be reset after reconnecting the battery (see page 149 ). 484 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 488
    Checking the Battery Removing the Battery Cover CLIPS Unlock Lock 3. To reinstall the cover, reinstall to remove clip : Push to reset/install clip Maintenance 1. Turn the knob of the battery cover to UNLOCK as shown in the illustration. 2. Remove the holding clips by pushing on the center of
  • 2010 Acura RL | Owner's Manual - Page 489
    . If possible, store your vehicle indoors. Fill the fuel tank. Wash and dry the exterior completely. Clean the interior. Make sure the carpeting, floor mats, etc., are completely dry. Leave the parking brake off. Put the transmission in Park. Block the rear wheels. If the vehicle is to be stored for
  • 2010 Acura RL | Owner's Manual - Page 490
    ...488 Changing a Flat Tire ...489 If the Engine Won't Start ...493 Jump Starting ...494 If the Engine Overheats ...497 Low Oil Pressure Indicator ...500 Charging System Indicator...500 Malfunction Indicator Lamp ...501 Brake System Indicator ...502 Opening the Fuel Fill Door Manually ...503 Fuses
  • 2010 Acura RL | Owner's Manual - Page 491
    miles (kilometers) driving with the spare, this indicator begins to flash, then stays on again. You will also see a ''CHECK TPMS SYSTEM'' message on wheel. The spare tire is not designed to be mounted on a regular wheel, and the spare wheel is not designed for mounting a regular tire. 488 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 492
    is supported only by the jack. TOOL CASE JACK 3. Open the trunk, and fold the trunk floor forward. Taking Care of the Unexpected 4. Take the tool case out of the spare tire. 5. Unscrew the wing bolt, and remove the spacer cone. Then take the spare tire out of its well. CONTINUED 489 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 493
    wrench as shown to raise the vehicle until the flat tire is off the ground. 9. Remove the wheel nuts, then remove the flat tire. Temporarily place the flat tire on the ground with the outside surface of the wheel facing up. You could scratch the wheel if you put it face down. 490 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 494
    wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten the wheel nuts fully. 12.Lower the vehicle to the ground, and remove the jack. Taking Care of the Unexpected CONTINUED 491 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 495
    before driving. 17.Lower the trunk floor, then close the trunk lid. 18.Your vehicle's original tire has a tire pressure monitoring system sensor. To replace a tire, refer to Changing a Tire with TPMS (see page 424 ). WING BOLT 13.Tighten the wheel nuts securely in the same crisscross pattern. Have
  • 2010 Acura RL | Owner's Manual - Page 496
    almost nothing. The engine's starter motor does engine does not start up and run. at all, the battery is discharged. See Jump of the fuses. If the fuses are OK problem. See Emergency Towing on page 513 . If the headlights dim noticeably or go out when you try to start the engine, either the battery
  • 2010 Acura RL | Owner's Manual - Page 497
    will cause the immobilizer system indicator in the instrument panel to blink rapidly (see page 64 ). Do you have fuel? Check the fuel gauge; the low fuel indicator may not be working. There may be an electrical problem, such as no power to the fuel pump. Check all the fuses (see page 506 ). If
  • 2010 Acura RL | Owner's Manual - Page 498
    rupture. 2. Turn off all the electrical accessories: heater, A/C, climate control, stereo system, lights, etc. Put the transmission in Park, and set the parking brake. BOOSTER BATTERY 3. Remove the battery cover (see page 485 ), then remove the secondary under-hood fuse box cover from the positive
  • 2010 Acura RL | Owner's Manual - Page 499
    to any other part of the engine. 6. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle. 9. Reinstall the secondary underhood fuse box cover over the positive ( ) terminal of the battery, then reinstall the battery cover. Keep the ends of the
  • 2010 Acura RL | Owner's Manual - Page 500
    see steam and/or spray coming from under the hood, turn off the engine. Wait until you see no more signs of steam or spray, then open the hood. Taking Care of the Unexpected Driving with the temperature gauge pointer at the red mark can cause serious damage to the engine. CONTINUED 497 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 501
    engine engine, system drained and refilled with the proper mixture as soon as you can. 10.Put the radiator cap back on tightly. Run the engine , and check the temperature gauge. If it goes back to the red mark, the engine engine is hot can cause the coolant to spray out, seriously
  • 2010 Acura RL | Owner's Manual - Page 502
    a problem with the radiator system, you will see a ''CHECK RADIATOR SYSTEM'' on the multi-information display. If you see this message, the engine has probably overheated. You should take your vehicle to a dealer, and have it repaired as soon as possible. Taking Care of the Unexpected 499 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 503
    will discharge the battery rapidly. Go to a dealer or a service station where you can get technical assistance. Running the engine with low oil pressure can cause serious mechanical damage almost immediately. Turn of f the engine as soon as you can saf ely get the vehicle stopped. 500 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 504
    comes on while driving, or if you see a ''CHECK EMISSION SYSTEM'' message on the multiinformation display, it means one of the engine's emissions control systems may have a problem. Even though you may feel no difference in your vehicle's performance, it can reduce your fuel economy and cause
  • 2010 Acura RL | Owner's Manual - Page 505
    driving, the brake fluid level is probably low. You will see a ''BRAKE FLUID LOW'' message on the multi-information display. Press lightly on the brake pedal to see if it feels normal. If it does, check the brake fluid level the next time you stop at a service station (see page 460 ). 502 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 506
    Fuel Fill Door Manually If you must drive the vehicle a short distance in this condition, drive slowly and carefully. If the ABS indicator and the VSA system indicator come on with the brake system indicator, have your vehicle inspected by your dealer immediately. Opening the Fuel Fill Door Manually
  • 2010 Acura RL | Owner's Manual - Page 507
    the dashboard on the driver's and passenger's side. To remove the fuse box lid, put your finger in the notch on the lid, pull it toward you, and take it out of its hinges. To open the secondary fuse box lid, push the tab in the direction as shown in the illustration. 504 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 508
    fuse box is in the engine compartment on the driver's side. To open it, push the tabs as shown. The secondary under-hood fuse box is on the battery. To open it, push the tabs as shown. To check the fuse box, remove the battery cover first (see page 485 ). Taking Care of the Unexpected 505 2010
  • 2010 Acura RL | Owner's Manual - Page 509
    . 1. Turn the ignition switch to the LOCK (0) position. Make sure the headlights and all other accessories are off. 2. Remove the cover from the fuse box. FUSE BLOWN BLOWN 3. Check each of the large fuses in the under-hood fuse box by looking through the top at the wire inside. Removing these
  • 2010 Acura RL | Owner's Manual - Page 510
    fuse boxes by pulling out each fuse with the fuse puller. The fuse puller is inside the primary under-hood fuse box. 5. Look for a blown wire inside the fuse. If it is blown, replace it with one of the spare fuses of the same rating or lower. Taking Care of the Unexpected CONTINUED 507 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 511
    cannot drive the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits with the fuse puller provided in the underhood fuse box. Make sure you can do without that circuit temporarily (such as the accessory
  • 2010 Acura RL | Owner's Manual - Page 512
    positions will be lost. To store the driving positions again, see page 163 . On vehicles with navigation system page 313 ). If the radio fuse is removed, the audio system will disable itself. The next time you turn on the audio system you will see '' '' in the frequency display. Use the preset
  • 2010 Acura RL | Owner's Manual - Page 513
    Fog lights MG clutch Horn, Stop Rear defroster No. Amps. 15 16 17 18 19 20 21 22 23 40 A 15 A 30 A 40 A 40 A (40 A) 40 A 70 A 120 A 50 A 50 A Circuits Protected Back-up, ACC Hazard ABS/VSA motor ABS/VSA Drive by wire, LAF heater Option Heater motor Passenger's fuse box Battery IG
  • 2010 Acura RL | Owner's Manual - Page 514
    by Wire Ignition coil Daytime running light LAF heater Radio Interior light Back-up Door lock Accessory socket Occupant position detection system Wiper Rear heated seat Passenger's power seat reclining Driver's power seat sliding Tire pressure monitoring system Driver's power seat reclining No
  • 2010 Acura RL | Owner's Manual - Page 515
    amplifier Passenger's power window Driver's automatic seat belt tensioner/e-pretensioner Right rear power window No. Amps. 6 7 8 9 20 A 7.5 A 30 A 7.5 A Circuits Protected Heated seats Illumination lights Passenger's automatic seat belt tensioner/ e-pretensioner Air conditioner 512 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 516
    towing service to pull it out (see the previous column). For very short distances, such as freeing the vehicle, you can use the detachable towing hook that mounts on the anchor in the front bumper. COVER Towing with only two tires on the ground will damage parts of the all-wheel-drive system. Your
  • 2010 Acura RL | Owner's Manual - Page 517
    If Your Vehicle Gets Stuck COVER WHEEL NUT WRENCH To avoid damage to your vehicle, use the towing Do not use it as a tie down. TETHER The cover is attached to the bumper with a tether. 2. Remove the towing hook and wheel nut wrench from the tool case in the spare tire. 3. Screw the towing hook
  • 2010 Acura RL | Owner's Manual - Page 518
    Exhaust Emissions Controls ...527 PGM-FI System ...527 Ignition Timing Control System...527 Exhaust Gas Recirculation (EGR) System ...527 Three Way Catalytic Converter ...527 Replacement Parts...527 Three Way Catalytic Converters ...528 Emissions Testing ...529 Technical Information 515 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 519
    number (VIN) is the 17-digit number your dealer uses to register your vehicle for warranty purposes. It is also necessary for licensing and windshield on the driver's side. It is also on the certification label attached to the driver's doorjamb, and is stamped on the engine compartment bulkhead. The
  • 2010 Acura RL | Owner's Manual - Page 520
    Identification Numbers The engine number is stamped into the engine block. It is on the front left, below the valve cover. The transmission number is on a label on top of the transmission. ENGINE NUMBER Technical Information TRANSMISSION NUMBER 517 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 521
    Specifications Dimensions Length Width Height Wheelbase Track Capacities Fuel tank Change 1 Total Change 2 Including filter Without filter Total Automatic Change transmission Total fluid Rear differential fluid SH-AWD Change differential Total case SH-AWD Change clutch case Total Transfer Change
  • 2010 Acura RL | Owner's Manual - Page 522
    lights Back-up light Fog lights License plate lights Ceiling lights Front Rear Vanity mirror lights Door courtesy lights Trunk lights inside trunk trunk lid Engine Type Bore x Stroke Displacement Compression ratio Spark plugs 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 60
  • 2010 Acura RL | Owner's Manual - Page 523
    Traction AA Temperature A All passenger car tires must conform to Federal Safety Requirements from the norm due to variations in driving habits, service practices and differences in road characteristics and acceleration, cornering, hydroplaning, or peak traction characteristics. 520 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 524
    The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. Warning: The temperature grade for 521 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 525
    mark. (1) R 18 Tire construction code (R indicates radial). Rim diameter in inches. B97R (4) (3) (2) (1) Tire Size (2) Tire Identification Number (TIN) (3) Maximum Tire Pressure (4) Maximum Tire Load 522 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 526
    load that a tire is rated to carry for a given inflation pressure. Maximum Inflation Pressure The maximum tire air pressure that the tire can hold. Maximum Load Rating Means the load rating for a tire at the visual indication of the degrees of wear of the tread. Technical Information 523 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 527
    system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. 524 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 528
    tire pressure telltale. When the system detects a malfunction, the When the malfunction indicator is illuminated, the system may not be able to detect or replacement or alternate tires or wheels on the vehicle that wheels on your vehicle to ensure that the replacement or alternate tires and wheels
  • 2010 Acura RL | Owner's Manual - Page 529
    during driving. Onboard Refueling Vapor Recovery The onboard refueling vapor recovery (ORVR) system captures the fuel vapors during refueling. The vapors are adsorbed in a canister filled with activated carbon. While driving, the fuel vapors are drawn into the engine and burned off. 526 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 530
    sensors to determine how much air is going into the engine. It then controls how much fuel to inject under all operating conditions. The three way catalytic converters are in the exhaust system. Through chemical reactions, they convert HC, CO, and NOx in the engine's exhaust to carbon dioxide (CO2
  • 2010 Acura RL | Owner's Manual - Page 531
    chemical reactions to convert the exhaust gasses without affecting the metals. and NOx. Replacement units must be original Acura parts or their equivalent. The three way to air pollution, and can impair your engine's performance converters ineffective. Keep the engine well maintained. Have your
  • 2010 Acura RL | Owner's Manual - Page 532
    let it idle for 20 seconds. 5. Keep the vehicle in Park. Increase the engine speed to 2,000 rpm, and hold it there until the temperature gauge rises to at least 1/4 of the scale (about 3 minutes). 6. Without touching the accelerator pedal, let the engine idle for 20 seconds. CONTINUED 529 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 533
    allow, let the vehicle coast for several seconds without using the accelerator pedal or the brake pedal. 9. Stop the vehicle, turn off the ignition switch, and leave it off for 30 minutes. If the testing facility determines the readiness codes are still not set, see your dealer. 530 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 534
    Warranty and Client Relations Client Service Information ...532 Warranty Coverages ...533 Reporting Safety Defects (U.S. Vehicles) ...534 Authorized Manuals ...535 Warranty and Client Relations 531 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 535
    information: Vehicle identification number (see page 516 ) Name and address of the dealer who services your vehicle Date of purchase Mileage on your vehicle Your name, address, and telephone number A detailed description of the problem Name of the dealer who sold the vehicle to you 532 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 536
    2010 warranty manual that came with your vehicle. warranties cover your vehicle's emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information. Original Equipment Battery Limited Warranty this warranty gives up Acura accessories
  • 2010 Acura RL | Owner's Manual - Page 537
    vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or American Honda Motor Co., Inc. To contact NHTSA, you may call the Vehicle Safety about motor vehicle safety from http://www.saf ercar.gov. 534 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 538
    Service Manual 2005-2010 Acura RL Electrical Troubleshooting Manual 2005 Model Series Acura RL Body Repair Manual 2009 Acura RL Body Repair Manual Supplement 2010 Acura RL Owner's Manual 2010 Acura RL Navigation System Manual 2010 Acura RL Maintenance Journal 2010 Acura RL Advanced Technology Guide
  • 2010 Acura RL | Owner's Manual - Page 539
    536 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 540
    Parking Lights ...465 Front Side Marker Lights...465 Headlights ...463 Specifications ...519 Turn Signal Lights ...464, 468 CONTINUED B Battery Charging System Indicator...62, 500 Jump Starting ...494 Maintenance ...483 Cover ...485 Specifications ...519 Before Driving ...377 INDEX I 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 541
    ...453 When to...439 Charging System Indicator...500 Checklist, Before Driving ...396 Child Safety ...38 Booster Seats ...53 Child Seats ...45 Important Safety Reminders ...38 Infants ...43 D DANGER, Explanation of ...iii Dashboard ...4, 60 Daytime Running Lights...142 Indicator ...65 II 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 542
    Driver's ID ...81 Driving ...395 Economy ...384 Driving Position Memory System...163 Dust and Pollen Filter ...470 E Economy, Fuel ...384 Emergencies...487 Battery, Jump Starting ...494 Brake System Indicator ...502 Changing a Flat Tire ...489 Charging System Indicator ...500 Checking the Fuses
  • 2010 Acura RL | Owner's Manual - Page 543
    , Refueling ...379 Tighten Fuel Cap ...380 Fuses, Checking the ...506 H Halogen Headlight Bulbs...463 HandsFreeLink , Bluetooth ...354 Hazard Warning Flashers...146 Headlights Adaptive Front Lighting System (AFS)...144 Aiming ...462 Automatic Lighting ...141 Daytime Running Lights ...142 High Beam
  • 2010 Acura RL | Owner's Manual - Page 544
    Vehicle ...490 Jack, Tire ...489 Jump Starting ...494 K Keys ...150 Keyless Access System...166 Keyless Access Remote ...167 Keyless Memory Settings ...173 L Label, Certification ...516 Lane Change, Signaling ...140 Lap/Shoulder Belts ...22 Lights On Indicator ...64 CONTINUED INDEX V 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 545
    Index Lights Bulb Replacement ...463 Indicator ...61 Position ...140 Turn Signal ...140 Load Limit ...431 LOCK (Ignition Key Position) ...152 Locks Anti-theft Steering Column ...152 Childproof Door ...155 Fuel Fill Door ...379 Glove Box ...193 Power Door ...153 Trunk ...154 Trunk Pass-through Cover
  • 2010 Acura RL | Owner's Manual - Page 546
    Filter ...453 Fuses ...504 Light Bulbs ...462 Schedule ...439 Tires ...474 Wiper Blades ...472 Replacing Seat Belts After a Crash ...25 Reserve Tank, Engine Coolant ...383 Restraint, Child ...38 Reverse Gear Position...400 Reverse Tilt Door and Beeper ...21, 62 System Components...21 Use During
  • 2010 Acura RL | Owner's Manual - Page 547
    , Adjusting the ...156 Security System ...315 Sequential Sports Shift Mode ...405 Paddle Shifters ...403 Serial Number ...516 Service Intervals ...439 Service Manual, Purchasing ...535 Service Station Procedures ...379 Super Handling-All Wheel DriveTM (SH-AWD ) ...407 Torque Distribution Monitor
  • 2010 Acura RL | Owner's Manual - Page 548
    Rotating...479 Snow ...481 Specifications ...519 Tools, Tire Changing ...489 Torque Distribution Monitor (SH-AWD) ...407 Towing A Trailer ...431 Equipment and Accessories ...432 Weight Limit ...431 TPMS (Tire Pressure Monitoring System) ...423 Required Federal Explanation...524 Warning Message...427
  • 2010 Acura RL | Owner's Manual - Page 549
    ...137 Wheels Adjusting the Steering ...148 Alignment and Balance ...479 Compact Spare ...488 Nut Wrench ...490 Windows Auto Reverse ...186 Operating the Power ...185 Rear, Defogger ...147 Windshield Cleaning ...137 Defroster ...207 Washers ...137 X XM Radio ...229 : Canada only X 2010 RL
  • 2010 Acura RL | Owner's Manual - Page 550
    , pump octane number of 91 or higher. Fuel Tank Capacity: 19.4 US gal (73 ) Recommended Engine Oil: API Premium grade 5W-20 detergent oil (see page 452 ). Oil change capacity (including filter): 4.5 US qt (4.3 ) Automatic Transmission Fluid: Acura ATF-Z1 (automatic transmission fluid) (see page
  • 2010 Acura RL | Owner's Manual - Page 551
    of the vehicle and should remain with the vehicle when it is sold. STREET ADDRESS This owner's manual covers all models of the Acura RL. You may find descriptions of equipment and features that are not on your particular model. The information and specifications included in this publication were in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382
  • 383
  • 384
  • 385
  • 386
  • 387
  • 388
  • 389
  • 390
  • 391
  • 392
  • 393
  • 394
  • 395
  • 396
  • 397
  • 398
  • 399
  • 400
  • 401
  • 402
  • 403
  • 404
  • 405
  • 406
  • 407
  • 408
  • 409
  • 410
  • 411
  • 412
  • 413
  • 414
  • 415
  • 416
  • 417
  • 418
  • 419
  • 420
  • 421
  • 422
  • 423
  • 424
  • 425
  • 426
  • 427
  • 428
  • 429
  • 430
  • 431
  • 432
  • 433
  • 434
  • 435
  • 436
  • 437
  • 438
  • 439
  • 440
  • 441
  • 442
  • 443
  • 444
  • 445
  • 446
  • 447
  • 448
  • 449
  • 450
  • 451
  • 452
  • 453
  • 454
  • 455
  • 456
  • 457
  • 458
  • 459
  • 460
  • 461
  • 462
  • 463
  • 464
  • 465
  • 466
  • 467
  • 468
  • 469
  • 470
  • 471
  • 472
  • 473
  • 474
  • 475
  • 476
  • 477
  • 478
  • 479
  • 480
  • 481
  • 482
  • 483
  • 484
  • 485
  • 486
  • 487
  • 488
  • 489
  • 490
  • 491
  • 492
  • 493
  • 494
  • 495
  • 496
  • 497
  • 498
  • 499
  • 500
  • 501
  • 502
  • 503
  • 504
  • 505
  • 506
  • 507
  • 508
  • 509
  • 510
  • 511
  • 512
  • 513
  • 514
  • 515
  • 516
  • 517
  • 518
  • 519
  • 520
  • 521
  • 522
  • 523
  • 524
  • 525
  • 526
  • 527
  • 528
  • 529
  • 530
  • 531
  • 532
  • 533
  • 534
  • 535
  • 536
  • 537
  • 538
  • 539
  • 540
  • 541
  • 542
  • 543
  • 544
  • 545
  • 546
  • 547
  • 548
  • 549
  • 550
  • 551

One of the best ways to enhance the enjoyment of your new vehicle is to
read this manual. In it, you will learn how to operate its driving controls and
convenience items. Afterwards, keep this owner’s manual in your vehicle so
you can refer to it at any time.
Several warranties protect your new vehicle. Read the warranty booklet
thoroughly so you understand the coverages and are aware of your rights
and responsibilities.
As you read this manual, you will
find information that is preceded by
a
symbol. This
information is intended to help you
avoid damage to your vehicle, other
property, or the environment.
Maintaining your vehicle according to the maintenance minder shown in the
instrument panel helps to keep your driving trouble-free while it preserves
your investment. When your vehicle needs maintenance, keep in mind that
your dealer’s staff is specially trained in servicing the many systems unique
to your vehicle. Your dealer is dedicated to your satisfaction and will be
pleased to answer any questions and concerns.
Congratulations on your selection of the 2010 Acura RL. We are certain you
will be pleased with your purchase of one of the finest luxury vehicles in the
world.
Introduction
i
2010 RL