2010 Acura RL Owner's Manual - Page 179
2010 Acura RL Manual
Page 179 highlights
Keyless Access System Ignition Switch the beep, the steering wheel is locked. To unlock the steering wheel, turn it right and left while turning the ignition switch at the same time. If the remote and the vehicle do not recognize each other, turn the ignition switch to the LOCK (0) position, remove the ignition switch cover, insert the built-in key, and turn the switch (see pages 152 and 177 ). To turn the ignition switch to the LOCK (0) position, put the transmission in Park, press the switch in, and turn it to the LOCK (0) position. When the transmission is not in Park, you cannot turn the ignition switch to the LOCK (0) position. Before leaving the vehicle, make sure the ignition switch is in the LOCK (0) position. If you open the driver's door with the ignition switch in the ACCESSORY (I) position, a beeper will sound. You will also see a ''RETURN IGNITION SWITCH TO LOCK (0) POSITION'' message on the multiinformation display. When you push the ignition switch, the remote and the vehicle recognize each other. After the recognition, the remote indicator flashes, and a beeper sounds once. After the beep, turn the ignition switch. When the remote is out of the operating range, the ignition switch is locked. If the ignition switch cannot be turned from the LOCK (0) position to the ACCESSORY (I) position after 176 2010 RL