2010 Acura RL Owner's Manual - Page 213
2010 Acura RL Manual
Page 213 highlights
Climate Control System 1. Press the A/C button to view the climate control display. 2. Turn on the A/C by pushing ENTER on the interface selector. You will see A/C ON in the display. 3. Make sure the temperature is set to maximum cool. . 4. Select 5. If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode. 6. Set the fan to the desired speed by turning the interface knob. Dehumidify the Interior Air conditioning, as it cools, removes moisture from the air. When used in combination with the heater, it makes the interior warm and dry. 1. Switch the fan on. 2. Turn on the air conditioning. and fresh air mode. 3. Select 4. Adjust the temperature to your preference. This setting is suitable for all driving conditions whenever the outside temperature is above 32°F (0°C). To Defog and Defrost To remove fog from the inside of the windows: 1. Set the fan to the desired speed, or high for faster defrosting. . The system 2. Select automatically switches to fresh air mode and turns on the A/C. 3. Adjust the temperature so the airflow feels warm. to help clear the 4. Select rear window. 5. To increase airflow to the windshield, close the corner vents. When you switch to another mode from , the A/C setting returns to the previous setting (on or off). Select A/C, then press ENTER on the interface selector to turn the A/C off if it is on. 210 2010 RL