2011 Acura TL Owner's Manual - Page 450

Service Station Procedure Tighten Fuel Cap Message off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another message, press the INFO button. The ''TIGHTEN FUEL CAP'' message will appear each time you restart the engine until the system turns the message off. Before Driving Opening and Closing the Hood HOOD RELEASE HANDLE Your vehicle's on board diagnostic system will detect a loose or missing fuel fill cap as an evaporative system leak. The first time a leak is detected a ''TIGHTEN FUEL CAP'' message appears on the multi-information display. Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go If the system still detects a leak in your vehicle's evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer. For more information, see page 562 . 1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. CONTINUED 447 2011 TL