2011 Acura TL Owner's Manual - Page 532

Lights 6. Push a new bulb straight into the socket until it bottoms, and reinstall the socket into the light assembly by turning it clockwise until it locks. 7. Turn on the lights to make sure the new bulb is working. 8. Reinstall the trunk lining. Make sure it is installed under the edge of the trunk seal. 9. Put the holding clip into the hole on the side of the trunk lining. Reinstall the screw. Maintenance BULB SOCKET 3. Pull the taillight assembly straight back out of the body. 4. Determine which of the three bulbs is burned out: back-up light, turn signal, or side marker. 5. Remove the socket by turning it one-quarter turn counterclockwise, and pull the bulb straight out of its socket. 529 2011 TL