2007 BMW 3 Series Owner's Manual - Page 59

3. Allow the belt strap to retract and pull it taut against the child-restraint system. The safety belt is locked. To unlock the safety belt 1. Open the belt buckle 3. Allow the safety belt strap to retract all the way. Controls Reference Mobility Communications Entertainment Navigation 1 2 3 4 5 6 7 The anchor points for the lower LATCH anchors are located behind the labeled protective caps. Direction of travel Head restraint Hook for upper retaining strap Anchor Rear window shelf Seat backrest Upper retaining strap of child-restraint system If necessary, fold the anchors upward before use. 1. Push the head restraint upward. 2. Guide the upper retaining strap between the head restraint holders. 3. Use the hook to clip the retaining strap to the anchor. 4. Push the head restraint into its lowermost position. 57 Online Edition for Part no. 01 41 0 013 670 - © 02/07 BMW AG 2. Remove the child-restraint system. For child-restraint systems with tether straps there are two additional anchors, see arrows. LATCH: Lower Anchors and Tethers for CHildren. When installing and using LATCH childrestraint systems, comply with the system manufacturer's operating and safety instructions.< Before installing the child seat, pull the belt out of the area for the child-restraint fixing system. Make sure that the two lower LATCH anchors are properly engaged and that the child-restraint system rests firmly against the seat backrest.< Make sure the upper retaining strap does not run over sharp edges and is not twisted as it passes to the top anchor. Otherwise the strap will not properly secure the childrestraint system in the event of an accident.< Coupe: child-restraint system with tether strap Use the top tether anchors to secure child-restraint systems only, otherwise the anchors could be damaged.< Driving tips LATCH child-restraint fixing system Coupe: placement of the tether strap At a glance