2007 BMW 3 Series Owner's Manual - Page 71
2007 BMW 3 Series Manual
Page 71 highlights
Selecting distance The car's current speed is stored. It is displayed on the speedometer and briefly in the instrument cluster. > Press downward: Increase distance > Press upward: Decrease distance. The selected distance is displayed in the instrument cluster. Distance 1 Increasing desired speed Press or tap the lever to the resistance point or beyond, arrow 1, until the desired speed is displayed. > Each time the lever is tapped to the resistance point, the desired speed is increased by approx. 1 mph or 1 km/h. > Each time the lever is tapped beyond the resistance point, the desired speed is increased by up to 5 mph or 10 km/h until the maximum speed of 110 mph or 180 km/h is achieved. The speed then displayed is stored and achieved on a clear road. Distance 2 Decreasing desired speed Pull the lever, arrow 2, until the desired speed is displayed. The other functions work analogously to those described under Increasing desired speed. Distance 3 This distance is always set when the system is used for the first time after starting the engine. Distance 4 Use good judgment to select the appropriate following distance given road conditions, traffic, applicable laws and driving recommendations for safe following distance. Otherwise, an accident risk could result.< 69 Online Edition for Part no. 01 41 0 013 670 - © 02/07 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls At a glance