2007 BMW X3 Owner's Manual - Page 110
2007 BMW X3 Manual
Page 110 highlights
Replacing components Brake lamp: 1. Remove bulb holder, refer to arrow 2. 2. Remove and replace the bulb. Wheel changes Safety precautions to observe in the event of a flat tire and during all tire changes: Park the vehicle as far as possible from passing traffic. Park on a firm, flat, surface. Switch on the hazard warning flashers. Lock the steering wheel with the wheels pointing straight ahead. Engage the handbrake and shift into first gear or reverse, or move the selector lever to position P. All passengers should be outside the vehicle and well away from your immediate working area, behind a guardrail, for instance. If a warning triangle* or portable hazard warning lamp* is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regulations. Change the wheel only on a level, firm surface which is not slippery. The vehicle or the jack could slip to the side if you attempt to raise the vehicle on a soft or slippery surface such as snow, ice, tile, etc. Position the jack on a firm support surface. Do not use a wooden block or similar object as a support base for the jack, as this would prevent it from extending to its full support height and reduce its load-carrying capacity. To avoid serious or fatal injury: never lie under the vehicle, and never start the engine while it is supported by the jack.< License plate lamps C5W bulb, 5 watts 1. Press the lamp out to the side with a screwdriver. 2. Remove the lamp and replace the bulb. Liftgate lamp 10 watt bulb 1. Take out the bulb holder. 2. Replace the bulb. Center brake lamp This lamp is designed with LED technology. In the event of a malfunction, please consult a BMW Sports Activity Vehicle Center or a garage that works in accordance with BMW guidelines with appropriately trained personnel. 108 Online Edition for Part no. 01 41 0 013 638 - © 03/07 BMW AG