2007 BMW X3 Owner's Manual - Page 71
2007 BMW X3 Manual
Page 71 highlights
Setting compass zones Set your vehicle to the appropriate compass zone so that the compass functions correctly, refer to world map with compass zones. In order to set the compass zone, press and hold the adjusting button for approx. 3-4 seconds. The display indicates the number of the currently set compass zone. To change the zone setting, repeatedly press the adjusting button briefly until the number of the compass zone that applies to your current position is displayed. Driving tips Reference Mobility The compass will be operational again after approx. 10 seconds. Calibrating digital compass In the following situations, the digital compass must be calibrated: > The wrong cardinal direction appears on the display. > The cardinal direction displayed does not change despite a change in the direction of travel. > Not all cardinal directions are displayed. 3. Press the adjusting button for approx. 6-7 seconds in order to call up C. Then drive in at least one complete circle at a maximum speed of 4 mph/7 km/h. If the calibration was successful, then the display C is replaced with the cardinal directions. Setting for right-hand/left-hand drive Your digital compass is already set to the righthand/left-hand drive of your vehicle at the factory. Procedure 1. Make sure that there are no large metal objects or overhead power lines in the vicinity of your vehicle and that you have enough space to drive in a circle. 2. Input the currently applicable compass zone. Set language You can set the language of the display: Press the adjusting button for approx. 12-13 seconds. Press the adjusting button again briefly in order to change between English "E" and German "O". 69 Online Edition for Part no. 01 41 0 013 638 - © 03/07 BMW AG Controls At a glance