2008 BMW X5 Owner's Manual - Page 52
2008 BMW X5 Manual
Page 52 highlights
Adjusting Seat heating* Front Rear Operation similar to front seat heating; without temperature distribution. The temperature setting progresses one step through its control sequence each time you press the button. The maximum temperature is supplied when three LEDs are lit. To switch off: press the button longer. The temperature is reduced, if need be, down to no heat in order to reduce the load on the battery. The LEDs remain lit. Active seat ventilation* and seat heating* Front Temperature distribution* The heat output can be distributed variously in the seat cushion and the backrest. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Move the controller to the left to open "Climate". 3. Select "Seat heater distribution" and press the controller. 4. Move the controller to the left or right to select "Driver" or "Passenger". 1 2 Seat heating Active seat ventilation Press button 1 or 2 once depending on the temperature or ventilation position. The LED in the respective button lights up. The temperature or ventilation levels are shown on the Control Display. The air quantity is reduced and if need be, the ventilation is switched off in order to reduce the load on the battery. The LEDs remain lit. To switch off: press button 1 or 2 longer. Temperature distribution 5. Turn the controller. The adjustment is applied; the field can be changed. The heat output can be distributed variously in the seat cushion and the backrest. iDrive, for operating principle refer to page 16. 1. Open the start menu. 50 Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG