1994 Buick Park Avenue Owner's Manual - Page 260

Loading Your Vehicle %I \ TIRE-LOADING INFORMATION OCCUPANTS VEHICLE CAP. WT. CTR. FRT. RR. TOTAL LBS. KG Two taillamp bulbs are a tabbed assembly. Squeeze the release in and pull the assembly out. Pull the bulb straight out from the socket. To replace the assembly, insert the tabs into the slots and push in until it locks into place. MAX. LOADING & GVWR SAME AS VEHICLE COLD TIRE CAPACITY WEIGHT XXX TIRE SIZE PRESSURE SPEED RTG PSliKPa FRT. RR. SPA. IF TIRES ARE HOT, ADD 4PS1/28KPa SEE OWNER'S MANUAL FOR ADDITIONAL ( INFORMATION ,j;;f&ip \]]!mlp To replace the third taillamp bulb and sidemarker bulb, turn the socket 1/4 turn and pull it out. Pull the bulb straight out from the socket. The backup bulb can be replaced by squeezing the lock on the socket, turning it 1/4 turn and pulling it out. Pull the bulb straight out. Reverse the above steps to reassemble the light and the trunk trim. Two labels on your vehicle show how much weight it may properly carry. The Tire Loading Information label found on the rear edge of the driver's door tells you the proper size, speed rating and recommended inflation pressures for the tires on your vehicle. It also gives you important information about the number of people that can be in your vehicle and the total weight that you can carry. This weight is called the Vehicle Capacity Weight and includes the weight of all occupants, cargo, and all nonfactory-installed options.