1995 Buick LeSabre Owner's Manual - Page 126

Adjusting theSpeakers BAL: Press this button lightly so it extends. Turn the knob to move the sound to the left or right speakers. The middle position is a detent and balances the speakers. FADE: Press this button lightly so it extends. Turn the knob to move the sound to the front or rear speakers. The middle position is a detent and balances the speakers. Push the knobs back in when you're not using them. PREV (1): Press this button to search for the previous selection on the tape. Your tape must have at least three seconds of silence between each selection for PREV to work. NEXT (2): Press this button to search for the next selection on the tape. Your tape must have at least three seconds of silence between each selection for NEXT to work. The SEEK down and up arrows will also find the previous and next selections on the tape. Playing a Cassette Tape The longer sidewith the tape visible should face to the right. The tape will begin playing as soon as you insert it. If you hear nothing or hear a garbled sound, the tape may not be in squarely. Press EJECT to remove the tape and start over. If you want to insert a tape when the ignition is off, first press EJECT or RCL. REVERSE (3): Press this button to reverse the tape rapidly. Press it again to return to playing speed. The radio will play while the tape reverses. FORWARD (4): Press this button to advance quickly to another part of the tape. Press the button again to return to playing speed. Theradio will play while the tape advances. SIDE (5): Press this button to change the side of the tape that is playing. 00 (6): Press this button to select or deselect Dolby@B Noise Reduction t o reduce background noise. Dolby'" B Noise Reduction is manufactured under license from Dolby Laboratories Licensing Corporation. While the tape is playing. use the VOL, FADE, BAL, TREB and BASS controls just as you do for the radio. Other controls may have different functions when a tape is inserted. The display will show TAPE and an arrow to show the side of the tape playing. Your tape bias is set automatically.