1995 Buick LeSabre Owner's Manual - Page 89

To Resume a Set Speed Suppose you set your cruise control a desired speed at and then you apply the brake. This,of course, shuts off the cruise control. Butyou don't need to reset it. Once you're going about 25 mph (40 km/h) or more, you can move the cruise control switch from ON to WA for about half a second. To Increase Speed While Using Cruise Control There are two ways to go a higher speed. Here's the IO first: Use the accelerator pedal to get to the higher speed. Push the button at the end of the lever, then release the button and the accelerator pedal. You'll now cruise at the higher speed. Here's the second way to go to a higher speed: Move the cruise switch from ON to R/A. Hold it there until you get up to the speedyou want, and then release the switch. You'll go right back up to your chosen speed and stay there. Remember, if you hold the switch at WA longer than half a second, the vehicle will keep going fasteruntil you release the switchor apply the brake. You could be startled and even lose control.So unless you want to go faster, don't hold the switch at R/A. To increase your speed in very small amounts, move the switch to WA for less than half a second and then release it. Each time you do this, yourvehicle will go about 1 mph (1.6 km/h) faster. The accelerate feature will only work after you have set the cruise control speed by pushing the SET button. 2-33