1997 Buick Skylark Owner's Manual - Page 93

If a bulb is burned out, have it replaced to help avoid an accident. If the mows don't go on at all when you The turn signal has two upward (for right) and two signal a turn, check the fuse (see "Fuses and Circuit downward (forleft) positions. These positions allow you Breakers" in the Index) and burned-out bulbs. for to signal a turn or a lane change. Thrn Signal On Chime To signal aturn, move the lever all the way up or down. When the t r is finished, the lever will return automatically.chime will sound your turn signal is left on after un A if having gone3/4 of a mile, to remind you turn your to A green arrow on .the signal off. instrument panelwill flash in the direction of the turn Headlamp High/Low Beam or lane change. To change the headlamps from low beam to high beam or high beam low to beam, pull the turn signal lever all the way toward you. Then release it. When the high beams are on, this blue light on the instrument To signal a lane change, raise or lower the lever just panel also will be on. until the arrow starts to flash. Hold there until you it complete your lane change. lever will return by The itself when you release it. On vehicles equipped with Daytime Running Lights AS you signal aturn or a lane change, the arrows flash if if the at twice the normal rate, a signal bulb may be burned out.(DRL), the light on the instrument panel may flash DlU system is experiencing a problem or a heac mD is malfunctioning. Turn and Lane Change Signals