2002 Buick Park Avenue Owner's Manual - Page 11

To recall the exit position, your vehicle must be in PARK (P). Push and release the EXIT button and the seat will move to the exit position previously stored for the currently identified driver. You will hear one beep. If an exit position has not been stored for the currently identified driver, the seat will move all the way back. To stop recall movement of the seat at any time, press the driver's power seat control located on the outboard side of the front seat. Mirrors, lumbar and shoulder belt height adjuster positions will not be stored or recalled for the exit position. If you would like your stored driving or exit position to be recalled when unlocking your vehicle with the transmitter, see "Personal Choice Features, Memory Seat Recall" in the Index. Heated Seats (Option) If your vehicle has this option, press this button to turn on the heating element in the seat. The heated seat controls are located next to the climate controls on the instrument panel. When the heated seat control is first pressed, the HI setting is activated. Press the button again for the LO setting. The third press of the button turns the feature off. The LO setting warms the seatback and cushion until the seat nears body temperature. The HI setting heats the seat to a slightly higher temperature. A light on the control reminds you that the heating system is in use. When the ignition is turned off, the heating element is also turned off. 1-5