2005 Buick Park Avenue Owner's Manual - Page 179

RECALL: Press this button to see which track is playing. Press it again within five seconds to see how long it has been playing. To change the default on the display, track or elapsed time, press this button until you see the display you want, then hold this button until the display flashes. The selected display will now be the default. AM-FM: Press this button to listen to the radio when a CD is playing. The inactive CD will remain safely inside the radio for future listening. SOURCE: Press this button to play a cassette tape or a CD when listening to the radio. TAPE SIDE and an arrow will appear on the display. If this button is pressed again, the system will go to CD play; CD PLAY will appear on the display. CD Messages E (Error): The CD may not play and an E along with a number may appear on the display for one of the following reasons: • You are driving on a very rough road. When the road becomes smooth, the CD should play. • It is very hot. When the temperature returns to normal, the CD should play. If E20 appears on the display and the CD comes out, it could be for one of the following reasons: • The CD is dirty, scratched, wet, or upside down. • The air is very humid. Wait about an hour and try again. w SEEK x: Press the up or the down arrow to go to the previous or to the next track on the CD. EJECT: Press this button, located next to the CD slot, to stop a CD when it is playing and to remove a CD when it is not playing. Eject may be activated with the radio off. CDs may be loaded with the ignition and radio off if this button is pressed first. • There may have been a problem while burning the CD. • The label may be caught in the CD player. If the CD is not playing correctly, for any other reason, try a known good CD. If any error occurs repeatedly or if an error cannot be corrected, contact your dealer. If your radio displays an error number, write it down and provide it to your dealer when reporting the problem. 3-65