2008 Buick Enclave Owner's Manual - Page 348

Taillamps, Turn Signal, Stoplamps and Sidemarker Lamps To replace one of these bulbs, do the following: 1. Open the liftgate. See Liftgate on page 2-12 or Power Liftgate on page 2-14 for more information. 2. Remove the convenience net, if the vehicle has one. 3. Remove the three hex nuts holding the taillamp assembly in place. 4. Pull out the taillamp assembly. 5. Turn the bulb socket counterclockwise and pull it straight out to remove it. 6. Replace the old bulb with a new one. 7. Turn the bulb socket clockwise to reinstall. 8. Reverse these steps to reinstall the taillamp assembly. When reinstalling the taillamp assembly, make sure the plastic pin on the taillamp assembly lines up and is inserted correctly into the opening of the vehicle. A. Taillamp B. Sidemarker Lamp 5-48