2008 Buick Enclave Owner's Manual - Page 8

Heated Seats On vehicles with heated front seats the controls are located on the center console. To operate the heated seats the engine must be running. Memory Seat and Mirrors On vehicles with the memory package, the controls are located on the driver's door. 1: Saves the seating position for driver 1 2: Saves the seating position for driver 2 I J (Heated Seatback): Press this button to turn on the heated seatback. (Heated Seat and Seatback): Press this button to turn on the heated seat and seatback. The light on the button will come on to indicate that the feature is working. Press the button to cycle through the temperature settings of high, medium, and low and to turn the heat to the seat off. Indicator lights above the button will show the level of heat selected: three for high, two for medium, and one for low. The passenger seat may take longer to heat up. If your vehicle has remote vehicle start and is started using the remote keyless entry transmitter, the front heated seats will be turned on to the high setting if it is cold outside. See "Remote Vehicle Start" under Remote Keyless Entry (RKE) System Operation on page 2-5. When the key is inserted into the ignition and the ignition is turned on, the heated seat feature will turn off. To turn the heated seat feature back on, press the desired button. S: Recalls the easy exit position. To save your positions in memory, do the following: 1. Adjust the driver's seat, including the seatback recliner, both outside mirrors, and the power steering column to a comfortable position. See Outside Power Mirrors on page 2-42 for more information. Not all mirrors will have the ability to save and recall the mirror positions. 2. Press and hold button 1 until two beeps let you know that the position has been stored. A second seating and mirror position can be programmed by repeating the above steps and pressing button 2. 1-4