2009 Buick Enclave Owner's Manual - Page 262

4-22 Driving Your Vehicle Once the destination is reached: 1. Set the parking brake. 2. Reinstall the 50 amp BATT1 fuse to the underhood fuse block. 3. Shift the transmission to P (Park), turn the ignition to LOCK/OFF and remove the key from the ignition. 4. Disconnect the vehicle from the towing vehicle. Notice: Do not tow a vehicle with the front drive wheels on the ground if one of the front tires is a compact spare tire. Towing with two different tire sizes on the front of the vehicle can cause severe damage to the transmission. 3. Set the parking brake. 4. Turn the ignition to ACC/ACCESSORY. 5. Shift the transmission to N (Neutral). 6. To prevent the battery from draining while the vehicle is being towed, remove the 50 amp BATT1 fuse from the underhood fuse block and store in a safe location. See Underhood Fuse Block on page 5-91. 7. Release the parking brake. Notice: If the vehicle is towed without performing each of the steps listed under "Dinghy Towing," the automatic transmission could be damaged. Be sure to follow all steps of the dinghy towing procedure prior to and after towing the vehicle. Notice: If 65 mph (105 km/h) is exceeded while towing the vehicle, it could be damaged. Never exceed 65 mph (105 km/h) while towing the vehicle. Dolly Towing (All-Wheel-Drive Vehicles) All-wheel-drive vehicles must not be towed with two wheels on the ground. To properly tow these vehicles, they should be placed on a platform trailer with all four wheels off of the ground or dinghy towed from the front.