2011 Buick Enclave Owner's Manual - Page 275

Driving and Operating R (Reverse), the video image automatically appears on the navigation screen. Once the driver shifts out of R (Reverse), the navigation screen will go back to the last screen that had been displayed, after a delay. Turning the Rear Vision Camera System On or Off To turn the rear vision camera system on or off: 1. Shift into P (Park). 2. Press the MENU button to enter the configure menu options, then press the MENU hard key to select Display or touch the Display screen button. 3. Select the Rear Camera Options screen button. The Rear Camera Options screen displays. 4. Select the Video screen button. When the Video screen button is highlighted the RVC system is on. The delay that is received after shifting out of R (Reverse) is approximately 10 seconds. The delay can be cancelled by performing one of the following: . 9-37 There is a message on the rear vision camera screen that states "Check Surroundings for Safety". Adjusting the Brightness and Contrast of the Screen To adjust the brightness and contrast of the screen, press the MENU button while the rear vision camera image is on the display. Any adjustments made will only affect the rear vision camera screen. ] (Brightness) : Touch the + (plus) or - (minus) screen buttons to increase or decrease the brightness of the screen. _ (Contrast) : Touch the + (plus) or - (minus) screen buttons to increase or decrease the contrast of the screen. Pressing a hard key on the navigation system. Shifting in to P (Park). Reach a vehicle speed of 8 km/h (5 mph). . .