2014 Buick LaCrosse Owner Manual - Page 216

9-38 Driving and Operating 1. Press the 5 button to turn the cruise system on. 2. Get to the speed desired. 3. Press and release the SET− control on the steering wheel . The desired set speed briefly appears in the instrument panel cluster. 4. Take your foot off the accelerator pedal. The cruise control indicator on the instrument cluster turns green after the cruise control has been set to the desired speed. See Instrument Cluster on page 5-8. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied or the * is pressed, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle reaches about 40 km/h (25 mph) or more, press RES+ up briefly. The vehicle returns to the previous set speed. Increasing Speed While Using Cruise Control If the cruise control system is already activated: . 5 (On/Off): Press to turn cruise control on or off. A white indicator comes on in the instrument cluster. RES+ (Resume/Accelerate): Press the control up briefly to make the vehicle resume to a previously set speed, or hold upwards to accelerate. If cruise control is already active, use to increase vehicle speed. SET− (Set/Coast): Press the control down briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease vehicle speed. Press and hold RES+ up until the vehicle accelerates to the desired speed, and then release it. To increase the speed in small increments, press RES+ up briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster. . * (Cancel): Press to disengage cruise control without erasing the selected set speed. Setting Cruise Control If the cruise button is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used. Reducing Speed While Using Cruise Control If the cruise control system is already activated: . Press and hold SET− down until the desired lower speed is reached, then release it. To slow down in small increments, press SET−down briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) slower. .