2014 Buick LaCrosse Owner Manual - Page 281

Vehicle Care 2. Remove the fasteners and pull back the trunk trim. 3. Remove the four plastic wing nuts holding the taillamp assembly in place. 4. Pull out the taillamp assembly and disconnect the wiring harness. 5. Turn the bulb socket counterclockwise to remove it. 6. Pull the old bulb straight out of the bulb socket. 7. Reverse Steps 1-6 to install. 2. Push the end on either of the lamp assemblies (passenger side shown) and then move the lamp assembly down to remove it from the trunk lid. 10-33 3. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 4. Pull the bulb (2) straight out of the bulb socket. 5. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly. 6. Move the lamp assembly into the trunk lid, engaging the clip side first. 7. Push on the lamp side opposite the clip until the lamp assembly snaps into place. License Plate Lamp The license plate lamps for this vehicle are on the trunk lid. To replace one of these bulbs: 1. Open the trunk. See Trunk on page 2-13.