2014 Buick LaCrosse Owner Manual - Page 62

3-8 Seats and Restraints Placing the ignition in OFF before the stored positions are reached stops the recall. If something has blocked the driver seat while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service. Automatically Recalling Memory Positions (Auto Memory Recall) The Auto (Automatic) Memory Recall feature automatically recalls the current driver 's previously stored "1" or "2" position when entering the vehicle. . Storing Memory Positions To save positions to the "1" and "2" buttons: 1. Adjust the driver seat, seatback recliner, and both outside mirrors to the desired driving positions. 2. Press and hold MEM (Memory) and "1" at the same time until a beep sounds. 3. Repeat Steps 1 and 2 for a second driver using "2." Manually Recalling Memory Positions If the vehicle is off, or in ON/RUN/ START but not in P (Park), press and hold "1," "2," or B to manually recall the previously stored memory positions. Releasing "1," "2," or B before the stored positions are reached stops the recall. If the vehicle is in ON/RUN/START and in P (Park), press and release "1," "2," or B to manually recall the previously stored memory positions. Depending upon the Auto Memory Recall feature enabled in the vehicle personalization menu, memory "1" or "2" positions are recalled in the following ways: To activate the recall when On Driver Door Open is selected in the personalization menu, do one of the following: . On vehicles with RKE, press K on the RKE transmitter and open the driver door. On vehicles with Keyless Access, press the lock/unlock button on the outside driver door handle and open the door. The RKE transmitter must be present for the recall to activate. If the driver door is already open, press K on the RKE transmitter to activate the recall. .