2014 Buick Regal Owner Manual - Page 144

5-34 Instruments and Controls Speed Signs: Displays sign information, which comes from a roadway database in the onboard navigation. Following Distance/Gap Setting: Used to select the alert timing for the Forward Collision Alert (FCA) and the gap for the Adaptive Cruise Control (ACC). See Forward Collision Alert (FCA) System on page 9-52 and Adaptive Cruise Control on page 9-41. Drive Cycle Info (eAssist Only): Shows the distance and fuel economy for the current drive cycle. of many vehicle systems. The controls for the DIC are on the right steering wheel control. been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold V for several seconds while the Oil Life display is active. See Engine Oil Life System on page 10-13. Coolant Temperature: Displays the coolant temperature in either degrees Celsius (°C) or degrees Fahrenheit (°F). Tire Pressure: Displays the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System on page 10-50 and Tire Pressure Monitor Operation on page 10-51. Battery Voltage: Displays the current battery voltage. The battery voltage can fluctuate while viewing this information on the DIC. This is normal. Driver Information Center (DIC) (Uplevel Cluster) The DIC displays are shown in the center of the instrument cluster in the Info App. See Instrument Cluster (Base Cluster) on page 5-8 or Instrument Cluster (Uplevel Cluster) on page 5-12. The Info App is only available when the vehicle is in ON/ RUN. The displays show the status y or z : Press to move up or down in a list. Press S to open application menus on the left. Press T to open interaction menus on the right. S or T : V (Set/Reset): Press to open a menu or select a menu item. Press and hold to reset values on certain screens.