2014 Buick Regal Owner Manual - Page 279

Vehicle Care 10-33 Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps To replace any one of these bulbs: 1. Open the trunk. See Trunk Release on page 1-6. 2. Remove the trunk trim panel push pin. 3. Pull the trunk trim panel back to gain access to the taillamp assembly. 4. Remove the two nuts that secure the taillamp assembly. 5. Remove the taillamp assembly and disconnect the wiring harness connector. License Plate Lamp Lamp Assembly 1. Taillamp 2. Taillamp/Sidemarker Lamp 3. Stop/Turn Signal Lamp 4. Back-up Lamp 6. Turn the bulb socket counterclockwise to remove it. 7. Pull the bulb from the socket. 8. Install a new bulb. 9. Turn the bulb socket clockwise to install it. 10. Reverse Steps 2-4 to reinstall the taillamp assembly. Bulb Assembly