2014 Buick Regal Owner Manual - Page 220

9-40 Driving and Operating Once the vehicle reaches about 40 km/h (25 mph) or more, press RES/+ up briefly. The vehicle returns to the previous set speed. Increasing Speed While Using Cruise Control If the cruise control system is already activated: . . 1. Press the 5 button to turn the cruise system on. 2. Get to the speed desired. 3. Press and release the SET/− control on the steering wheel . The desired set speed briefly appears in the instrument panel cluster. 4. Remove foot from the accelerator. The cruise control indicator on the instrument cluster turns green after cruise control has been set to the desired speed. See Instrument Cluster (Base Cluster) on page 5-8 or Instrument Cluster (Uplevel Cluster) on page 5-12. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied or the * is pressed, the cruise control is disengaged without erasing the set speed from memory. To slow down in small increments, press SET/− down briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) slower. Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the cruise speed you set earlier. While pressing the accelerator pedal or shortly following the release to override cruise control, briefly pressing SET− will result in cruise set to the current vehicle speed. Using Cruise Control on Hills How well the cruise control will work on hills depends upon the vehicle speed, load, and the steepness of the hills. When going up steep hills, you might have to step on the accelerator pedal to maintain your speed. When going downhill, you might have to brake or shift to a Press and hold RES/+ up until the vehicle accelerates to the desired speed, then release it. To increase the speed in small increments, press RES/+ up briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster. . Reducing Speed While Using Cruise Control If the cruise control system is already activated: . Press and hold SET/− down until the desired lower speed is reached, then release it.