1996 Cadillac Seville Owner's Manual - Page 18

Memory Seat (Option) Adjust the driver'sseat to a comfortable position and then press the SET button. Within five seconds,press button "1." A second seating position maybe programmed by repeating the above steps andpressing button "2" instead of until seat movement is complete. Releasing the buttons will stop seatadjustment. The EXIT button can be programmed to allow easy exit for up to two driver's.Adjust the seat to a comfortable "exit" position and press the SET buttonfollowed by the EXIT button.Within five seconds, press button 1. A second exit position may be programmed by repeating the above steps and pressing button instead of button 2 1. Be aware that the exit recall does not remember any recline positions. While your vehicle is in PARK (P), briefly press the EXIT button followed by either the 1 or 2 button to recall your programmed exit position. The exitposition may also be recalled if the vehicleis not in PARK (P) by briefly pressing the EXIT button and then pressing and holding either the 1 or 2 button until seat movement is complete. Releasing the buttons will stop seat adjustment. Automatic seat movement will occur if the Remote Keyless Entry (RKE) transmitter is used to enter the vehicle. The number on the back of the transmitter corresponds to the 1 or 2 seat position. After the unlock button is pressed on the RKEtransmitter and the key is placed in the ignition and turned on, the seat will automatically adjust to the appropriate position. Note that each time a memory button is pressed a single beep will sound through the radio. If your vehicle is in PARK (P), you can recall a seating position by briefly pressing button 1 or 2. This will adjust the seat to where you have previously programmed it. If you have accidently pressed one of the memory recall buttons and want to stop seat movement, press one of the manual seat controlbuttons. This cancels a memory seat recall. You can also recall a seat position if your vehicle is not in PARK (P). Press and hold either the 1 or 2 button 1-3