2000 Cadillac Catera Owner's Manual - Page 101

With the Twilight SentinelR on or with the lamp control dial turned to the headlamp position, push the turn signal lever on the driver's side of the steering wheel away from you to turn on the high-beam headlamps. This light on the instrument panel cluster will be on, indicating high-beam usage. Headlamp High/Low Beam Windshield Wipers Pull the lever back to the original position to return to low-beam headlamps. For more information, see "Headlamps" in the Index. WIPER: Move the lever on the passenger's side of the steering wheel up and down to control the wipers. MIST: Tap the lever up and then release it for a single wipe cycle. For more cycles, pull and hold the lever. = (HIGH): Move the lever all the way up for a fast wiper speed. Flash-To-Pass This feature uses the high-beam headlamps to signal the driver in front of you that you want to pass. This feature will work with either the headlamps on or off. To use, pull the turn signal lever toward you and release. - (LOW): The third position up controls the low wiper speed. -- (DELAY): This position is for a controlled delay setting. Turn the control dial on the lever to increase or decrease the delay between wipe cycles. o (OFF): This position turns off the wipers. 2-36