2000 Cadillac Catera Owner's Manual - Page 98

To raise the window, pull up the front of the control. Pulling the control up for about one second and then releasing it will express-close the window. When you stop your vehicle and turn the ignition key to LOCK, you can still use the power windows. The electrical power to operate the windows will not shut off until a door is opened -- there is no time limit to this feature. As soon as a door is opened, power window movement will stop immediately. Programming the Power Windows If the battery on your vehicle has been recharged, disconnected or is not working, you will need to reprogram each power window for the express-open and close features to work. Before reprogramming, you will need to replace or recharge your vehicle's battery. To program each window, follow these steps: 1. Close all doors. 2. Press and hold the power window control until the window has fully opened. 3. Pull the power window control up until the window is fully closed. 4. Continue holding the control up for approximately five seconds after the window is completely up. The window is now programmed. Repeat the process for each window. Anti-Pinch Feature If a hand, an arm or another object is above the middle of the window and is in the way of the power window express-closing, the window will stop at the obstruction and express-open to a preset factory position. CAUTION: Pressing and holding the power window control button will turn off the anti-pinch feature. If this happens, a power window won't stop if something gets in the way. You or others could be injured, and your window could be damaged. Be careful not to press and hold the power window control button. 2-33