2002 Cadillac Eldorado Owner's Manual - Page 10

Memory Seat and Mirrors (If Equipped) If your vehicle has this feature, the controls are located on the driver's door armrest. A second mirror and seating position may be programmed by repeating the above steps and pressing button 2 instead of button 1. Each time button 1 or 2 is pressed and released while the vehicle is in PARK (P), the memory position will be recalled. Each time a memory button is pressed, a single beep will sound. You can also recall a seat and mirror position if your vehicle is not in PARK (P). Press and hold either the 1 or 2 button until seat and mirror movement is complete. Releasing the buttons will stop adjustment. If you use the button with the unlock symbol on the remote keyless entry transmitter to enter the vehicle, the preset driver's seat and mirror positions will be recalled. The numbers on the back of the transmitters, 1 or 2, correspond to the numbers on the driver's armrest. If the remote keyless entry transmitter was not used to enter the vehicle, the last used seat and mirror positions will be recalled when a key is inserted in the ignition and is turned to RUN. The vehicle must be previously programmed to turn this feature on. See "Memory and Personalization Features" in the Index. These buttons are used to program and recall memory settings for the driver's seating and outside rearview mirror positions. Use the following steps to program each button: 1. Adjust the driver's seat (including lumbar adjustments) and both outside mirrors to a comfortable position. 2. Press the SET button. 3. Within five seconds, press button 1. A single beep will sound through the driver's side front speaker to let you know that the position has been stored. 1-4