2002 Cadillac Eldorado Owner's Manual - Page 150

Curb View Assist Mirror (If Equipped with Memory) When this feature is turned on, the passenger's side rearview mirror will tilt downward when the transaxle is shifted to REVERSE (R). The mirror returns to its previously programmed position once the transaxle is shifted out of REVERSE (R). See "Curb View Assist Mirror" in the Index for more information on this feature. Programmable Modes Mode 1 (MIRROR TILT IN REV): Turns feature on. Mode 2 (MIRROR TILT IN REV): Turns feature off. Before your vehicle was shipped from the factory, it was programmed to Mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, do the following: 1. Enter feature programming following the instructions listed previously. 2. Press the SKIP INFO button until MIRROR TILT IN REV appears on the display. 3. Press YES TRIP RESET to select this feature for programming. 4. A yes or no response must be made after each mode is displayed in order to continue to the next mode. Press the YES TRIP RESET button to indicate yes to turn this feature on, or press NO INFO RESET to turn this feature off. FEATURE ON is displayed after a yes response. If you respond with no, FEATURE OFF is briefly displayed. STORAGE MODE will appear on the display once a mode has been selected for the curb view assist mirror feature. If you press the SKIP INFO button, the menu will advance to the next feature available for programming. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. 2-93