2003 Cadillac CTS Owner's Manual - Page 200

To customize the name using the Base audio system, do the following: 1. Select the PERSONALIZATION NAME menu item by pressing the TUNE/SEL knob once. You will see a cursor on the screen. 2. Turn the TUNE/SEL knob until you reach the first letter you want to highlight it. There is a complete alphabet with both upper and lower case letters and the numbers zero through nine. Also included are spaces and other non-letter characters such as the ampersand (&). 3. Press the TUNE/SEL knob once to select the letter. The letter will then appear on the display. If you make a mistake, press the Back key. This will exit the menu. You can then go back into the menu and edit the name. You can also press the TUNE/SEL knob repeatedly to cycle through all the characters until you reach the character you wish to change. 4. Repeat Steps 2 and 3 until the name you want is complete. You can program up to 16 characters. 5. Press the BACK button located to the lower right of the display to exit and set your choice or let the screen time out and return to the main screen. To customize the name using the Navigation system, do the following: 1. Press the multi-function button located to the right of the display that is next to the EDIT prompt. This will open the EDIT menu. You will see an alphabet at the bottom of the display and a blank line with a blinking cursor. Also included here are spaces and other non-letter characters such as the ampersand (&). 2. Scroll to the first letter you want to highlight it. 3. Press the TUNE/SEL knob once to select the letter. The letter will then appear on the line above the alphabet. 4. Repeat Steps 2 and 3 until the name you want is complete. You can program up to 26 characters. If you make a mistake, press the multi-function button located to the right of the display that is next to the Delete prompt. This will delete the last letter you typed so you can input a different letter. 5. Press the multi-function button located to the right of the display that is next to the Back prompt to exit and set your choice. The name you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. 2-132