2003 Cadillac CTS Owner's Manual - Page 393

To reinstall the rear seat cushion, do the following: 1. Position the seat cushion so that you can route the safety belts through the proper slots in the seat cushion. 2. Slide the rear of the cushion up and under the seatback so the rear-locating guides hook into the wire loops on the back frame. 3. With the seat cushion lowered, push rearward and then press down on the seat cushion until the seat cushion snaps into place. 4. Push and pull on the seat cushion to make sure it is locked into place. 5. Check to make sure the safety belts are properly routed and that no portion of any safety belt is trapped under the seat cushion. Rear Underseat Fuse Block (Driver's Side) The driver's side rear fuse block is located under the rear seat on the driver's side of the vehicle. The rear seat cushion must be removed to access the rear fuse block. See "Removing the Rear Seat Cushion" listed previously. To access the fuse block, push in the two tabs located at each end of the fuse block cover. Then lift the cover off. 6-67